Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Passende Seitennamen:
- Darstellung des Energieverbrauchs (Strom und Gas)
- Virenschutz mit Hilfe von AMaViS und SpamAssassin
- Installation von CentOS 5.x über das Netzwerk (local/extern)
- Installation von CentOS 6.x über das Netzwerk (local/extern)
- Loginmeldungen individuell anpassen
- Router flashen
- Offloader auf Basis eines FUTRO Thinclient
- UniFi UAP Router flashen
- GPS Datenerfassung und Auswertung
- Host based Intrusion Detection System mit AIDE unter Arch Linux
- Einrichten von Asterisk 1.4 unter CentOS5
- asterisk2
- Download der Asterisk-Quellen
- Installation von Asterisk
- konfiguration_asterisk_og
- Einrichten von Asterisk unter CentOS
- Wetterbeobachtung und -datenerfassung bei der Wetterstation Pliening
- Wetterbeobachtung und -datenerfassung bei der Wetterstation Pliening
- Installation des ersten Test-Gasts (vHOST)
- Installation und Basisinstallation der Virtualisierungsmaschine
- Basiskonfiguration von horde
- Horde Passwortänderungen: Passwd
- eMail-Befehl: password
- DMARC - Domain-based Message Authentication, Reporting & Conformance
- Installation und Konfiguration von Spamassassin
- Dovecot, Quotas - Speicherquoten für User und Maildomains
- Basiskonfiguration des Frameworks Horde 5 unter CentOS 7.x
- Horde 5 Applikation Passwortänderungen: Passwd unter CentOS 7.x
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7
- SASL-Authentifizierung beim Postfix MTA 2.11 unter CentOS 7
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7
- SASL-Authentifizierung beim MailTransferAgent Postfix 3.x unter CentOS 7
- Postscreen - Schutz vor Überbelastung und SPAM-Abwehr
- Spamassassin für AMaViS unter CentOS 7.x
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x
- eMail-Befehl: password
- erweiterter SPAM-Schutz mit Hilfe von SpamAssassin
- SASL-Authentifikation
- Alternativer FastCGI Process Manager für den Apache httpd unter CentOS 7.x
- IT Infrastruktur und Sytem Monitoring mit Nagios unter CentOS 7.x
- Ansible
- Bau eines Freifunk-Offloaders auf Basis eines Raspberry 4B
- Ansible - einfaches Playbook-Beispiel: sudoers anpassen
- Einrichten von Asterisk 1.6 unter CentOS5
- nützliche Kommandos rund um Asterisk
- cdr.conf
- Asterisk Grundkonfiguration
- deutsche Sprachprompts
- Asterisk erster Wählplan
- Wählplanerweiterungen für die ISDN-Anbindungen
- fehlende Paket für Asterisk 1.4 unter CentOS5 nachinstallieren
- deutsche Sprachprompts für Asterisk
- Asterisk installieren
- Asterisk Anbindung ans ISDN
- Konfiguration von Asterisk 1.4
- misdn-init.conf
- mISDN
- Music On Hold
- MySQL-Datenbankdefinitionen
- odbc.ini
- Asterisk-Repository einbinden
- Asterisk unter CentOS
- Asterisk-User und -Gruppe anlegen
- Einrichten von Asterisk 1.4 unter CentOS5
- nützliche Kommandos rund um Asterisk
- TK-Leistungsmerkmal - Black-/Whitelisting - Sperrlisten
- Asterisk Grundkonfiguration
- Asterisk erster Wählplan
- Wählplanerweiterungen für die ISDN-Anbindungen
- dialplan3
- TK-Leistungsmerkmal - Filtergruppen
- deutsche Sprachprompts für Asterisk
- TK-Leistungsmerkmal Gruppenruf
- Asterisk installieren
- Asterisk Anbindung ans ISDN
- Music On Hold
- TK-Leistungsmerkmal - Nachtschaltung
- TK-Leistungsmerkmal - Anrufübernahmegruppe - PickUp
- Asterisk-Repository einbinden
- Einrichten von Asterisk 1.8 unter CentOS5
- TK-Leistungsmerkmal - Doppelruf/Parallelschaltung/Twinning
- Asterisk-User und -Gruppe anlegen
- TK-Leistungsmerkmal - VIP-Behandlung
- VoiceMail
- Einbinden der Wetterdaten der Davis Vantage Pro2 in das Webcam-Bild der Mobotix M25 (HD-Cam)
- Einbinden der Wetterdaten der Davis Vantage Pro2 in das Webcam-Bild der Mobotix M22M
- Das Perl-Scriptchen
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Basiskonfiguration
- IT Infrastruktur und System Monitoring mit Icinga 2 unter CentOS 7.x
- IT Infrastruktur und System Monitoring mit Icinga 2 unter CentOS 7.x
- Einrichten von Asterisk 1.8 unter CentOS6
- Einrichten von Asterisk 14.x unter CentOS7
Volltextergebnisse:
- Nitrokey Start in der Praxis unter ArchLinux @nitrokey:arch
- . </WRAP> <code>gpg: key 2E22436430385B49 marked as ultimately trusted gpg: revocation certificate stored as '/home/django/.gnupg/openpgp-revocs.d/E65B2BDF79A... (O)kay/(Q)uit? o gpg: key 9308FC78386863AC marked as ultimately trusted gpg: revocation certificate stored as '/home/django/.gnupg/openpgp-revocs.d/3E61A50347B
- Host based Intrusion Detection System mit AIDE unter Arch Linux @linux
- dow -Wlogical-op -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-z,pa... quested, in which case the exit status is defined as: 1 * (new files reported?) + ... ne. AIDE uses the backslash character (\) as escape character for ' ' (space), '@' and '\' ... config file. Lines beginning with # are ignored as comments. CONFIG OPTIONS These lines have
- DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen @linux
- ers\n participant "\n DHCP - SERVER \n" as links participant "\n Client \n" as rechts links <-- rechts : (Port 67) ... participant "\n RADV - SERVER/DAEMON \n" as links participant "\n Client / Host \n" as mitte participant "\n DHCPv6 - SERVER/DAEMON
- TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
- the specified destination, which may be specified as either [user@]hostname or a URI of the ... A complete command line may be specified as command, or it may have additional arguments. If... he server to be executed. The options are as follows: -4 Forces ssh to use IPv4 a... of connections from an authentication agent such as ssh-agent(1). This can also be specified
- Ansible - erweitertes Konfigurationsbeispiel 7: Ansible Vault @linux:ansible
- and overrides the rest if present. As mentioned above, the ANSIBLE_CONFIG environment v... t, configures the path to the Vault password file as an alternative to # specifying --vault-password-f... t, configures the path to the Vault password file as an alternative to # specifying --vault-password-f
- Nitrokey 3A mini in der Praxis unter ArchLinux @nitrokey:arch
- he terms of the GNU Lesser General Public License as published by 8 │ # the Free Software Foundat... okey devices 0.6.0 THIS COMMAND SHOULD NOT BE RUN AS ROOT! Please install udev rules and run `nitropy` as regular user (without sudo). We suggest using: ht... )kay/(Q)uit? o gpg: revocation certificate stored as '/home/django/.gnupg/openpgp-revocs.d/8B7A57A942E
- Ansible - Erweiterte Konfigurationsbeispiel: Inventory @linux:ansible
- gbw_ogod * ff_pliening_gbw_ug * ff_roding_as_nausch - **Gruppe** aller Offloader **''olall'... gbw_ogod * ff_pliening_gbw_ug * ff_roding_as_nausch * ff_pliening_gbw_futro_mesh * ff_... gbw_ogod * ff_pliening_gbw_ug * ff_roding_as_nausch * ff_pliening_gbw_client * ff-djan... od: ff_pliening_gbw_ug: ff_roding_as_nausch: oldeb: hosts: ff_plieni
- IT Infrastruktur und Sytem Monitoring mit Nagios unter CentOS 7.x @centos:web_c7
- variants) as a background process, intermittently running chec... ion files for Nagios. Development files are built as a separate package. /etc/httpd/conf.d/nagios.... # configuration file. Customize the paths, etc. as # needed to fit your system. ... ions across several config files # if you wish (as shown below), or keep them all in a single config
- Logfileanalyse und -Auswertung mit (Better-)AWStats unter CentOS 7.x @centos:web_c7
- lyzer works : from command line or as a CGI and shows you all information your log cont... is server log analyzer works from command line or as a CGI and shows you all information your log cont... gs/arpa.png /usr/share/awstats/wwwroot/icon/flags/as.png /usr/share/awstats/wwwroot/icon/flags/at.png ... ined value (1,2,3,4) # Backslash can be used as escape character.
- Icinga 2 - Netzwerkmonitoring mit Hilfe von SNMP @centos:web_c7:icinga
- s from other MIB modules, that are defined as lying within this subtree). If the network entit... allows a walk of a single instance to behave as generally expected, and return the specified in... the agent to query and at most one OID argument, as described there. The command: sn... ore object identifiers (OIDs) may be given as arguments on the command line. Each variable nam
- SASL-Authentifizierung beim MailTransferAgent Postfix 3.x unter CentOS 7 @centos:mail_c7
- inparam defaultFontName Courier state "Client" as request request : request state "SASL-Layer" as layer { state "Authentication Interface" as auth_int state "Mechanismen" as mech state "Methoden / Password Verification Services" as m
- erweiterte gewichtete Prüfungen mittels policyd-weight @centos:mail_c7
- he most frequent client/sender combinations (SPAM as well as HAM) to reduce the number of DNS queries. After the first three SMTP commands (HELO, MAIL FR... # checks in order to be listed as hard-HAM # After this... # DEFAULT: empty, will be initialized as # $USER $
- TLS-Verbindungen, verschlüsselte Kommunikation für Postfix 3.x unter CentOS 7 @centos:mail_c7
- flexible set of source configuration is read, as described in section SOURCE CONFIGURATION.... the correct subdirectory for adding files, as the subdirectory defines how contained cer... of CAs trusted on the system: · add it as a new file to directory /etc/pki/ca-trust/source/... s other than TLS) then: · add it as a new file to directory /etc/pki/ca-trust/source/
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- me Courier state "Absender Klaus generiert eMail" as sender sender : ---------------------------------... Mailserver_des_Absenders { state "Mail-Eingang" as smtpd_a smtpd_a : Annahme der eMail smtpd_a :... pd_a : Viren-Überprüfung state "DKIM-Signatur" as dkim_sig dkim_sig : Einfügen der DKIM dkim_si... im_sig : Header der eMail state "Mail-Ausgang" as smtp_a smtp_a : Versand der eMail smtp_a : zu
- Installation des Mailinglistenservers Mailman unter CentOS 7.x @centos:mail_c7
- certain items you will need to manually configure as the RPM is not capable of doing every installatio... security violations when SELinux is enabled. As of mailman-2.1.5-21 the following directory and f... The mapping of old locations to new locations is as follows: Directory Mapping: /var/mailman... ONFIG_DIR. New Directories (can be specified as parameter to configure): CONFIG_DIR: default
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Basiskonfiguration @centos:mail_c7:php7
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Ansible - erweiterte Konfigurationsbeispiele: Ansible mit Hilfe von Ansible einrichten @linux:ansible
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- phpMyAdmin 4.7 unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Der Cyrus Hochleistungs-Mailserver mit Unterstützung für IMAP und SIEVE unter CentOS 6.x @centos:mail_c6
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga