Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- or in numeric form (IP address or port number). Host information may be enclos... "[]"; this form is necessary only with IPv6 addresses. Examples: a service name... f hard-coding loopback IP address information in master.cf or in main.cf. ... request specifies a queue file, a sender address, a domain or host to deliver to, and recip
- DHCP-Server Konfigurieren unter CentOS 7.x @centos
- t their own network configuration information (IP address, subnetmask, broadcast address, etc.) from a DHCP server. The overall purpose of DHCP is to make it easier... to do something (e.g., should dhcpd provide addresses to unknown clients), or what parameters to ... ibe clients on the net‐ work, to provide addresses that can be assigned to clients, or to apply a
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7 @centos:mail_c7
- error message, time ($localtime), client ($client_address) and server ($server_name). # Django : 2019-01-2... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie... = unverified_recipient_reject_reason = Recipient address lookup failed # Django : 2019-01-27 - Adressveri... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7 @centos:mail_c7
- error message, time ($localtime), client ($client_address) and server ($server_name). # Django : 2014-10-1... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie... = unverified_recipient_reject_reason = Recipient address lookup failed # Django : 2014-10-24 - Adressveri... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- [OPTION]... [COMMAND]... Options: -4 Use IPv4 addresses only -6 Use IPv6 addresses only -n Don't resolve hostnames -N Print original source names -c ... is option hostnames will be resolved only to IPv4 addresses. -6 With this option hostnames will be resolved only to IPv6 addresses. -n This option disables res
- Grundabsicherung von Postfix @centos:mail_c6
- client information: host names, network addresses, and # envelope sender or recipient addresses; it is implemented # by the Postfix SMTP... ction # When pattern matches a mail address, domain or host # address, perform the corresponding action. # # blank lines and com
- Router Advertisements mit radvd unter Arch Linux einrichten und nutzen @linux
- er habe ich auch noch eine **U**nique **L**ocal **Address** (**[[https://de.wikipedia.org/wiki/IPv6#Unique_... Optionen (Präfix, MTU, DNS, SLLA - Src Link-Layer Address). Die wichtigsten Optionen sind hierbei: * **Address Autoconfiguration A-Flag** : Eine '1' bedeutet, d... onen nützlich ist, wenn der Client SLAAC-StatelessAddress Autoconfiguration durchführt. * **Router-Präf
- Secure Shell - ssh unter CentOS 7.x @centos
- SIS ssh [-1246AaCfgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec] [-D [bind_address:]port] [-E log_file] [-e escape_char] [-F configfile] [-I pkcs11] [-i identity_file] [-L [bind_address:]port:host:hostport] [-l login_name] [-m mac_spec... cipher | cipher-auth | mac | kex | key] [-R [bind_address:]port:host:hostport] [-S ctl_path] [-W h
- Installation und Konfigurationsdateien von Postfix 3 unter CentOS 7.x @centos:mail_c7
- entOS. # The mirror system uses the connecting IP address of the client and the # update status of each mir... AREADME /usr/share/doc/postfix-3.3.2/README_FILES/ADDRESS_CLASS_README /usr/share/doc/postfix-3.3.2/README_FILES/ADDRESS_REWRITING_README /usr/share/doc/postfix-3.3.2/README_FILES/ADDRESS_VERIFICATION_README /usr/share/doc/postfix-3.3.2/
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- ate LAN sitting behind the gateway. The IP addresses that can act as clients of 'chronyd' can b... The IP addresses from which 'chronyc' clients may connect can be... to fill the gaps. Particular areas that need addressing are : 1. Porting to other Unices This... achieved so far. The two main areas still to address are 1. The syst
- DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen @linux
- osa_server_proxy> Client -> Server : DHCPREQUEST Address 10.0.10.230 note right : DHCP4_INIT_REBOOT @end... fd77: client is in INIT-REBOOT state and requests address 10.0.10.230</pre></html> Die Dritte Meldung mit ... a_server_proxy> Client <- Server : DHCPOFFER mit Address 10.0.10.231 note right : DHCP4_LEASE_OFFER DHCP4... fd77: client is in INIT-REBOOT state and requests address 10.0.10.230 2024-07-04 13:23:13.726 INFO [kea-dh
- Installation und Konfigurationsdateien von Postfix unter CentOS 7.x @centos:mail_c7
- README /usr/share/doc/postfix-2.10.1/README_FILES/ADDRESS_CLASS_README /usr/share/doc/postfix-2.10.1/README_FILES/ADDRESS_REWRITING_README /usr/share/doc/postfix-2.10.1/README_FILES/ADDRESS_VERIFICATION_README /usr/share/doc/postfix-2.10.1... /usr/share/doc/postfix-2.11.6/README_FILES/ADDRESS_CLASS_README
- SNMP (unter CentOS 6.x) @centos:cacti_c6
- ELOW TO # SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. ## sec.name source commun... included at.atTable.atEntry.atPhysAddress #view rwview included at.atTable.atEntry.atNetAddress #view rwview included ip.ipFor... NetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress #view rwview included ip.ipNet
- Installation mit Hilfe eines Kickstartfiles unter CentOS 7.x (PXE-Server) @centos:pxe_c7
- entOS. # The mirror system uses the connecting IP address of the client and the # update status of each mir... ssh_port_t -p tcp #PORTNUMBER # Specifies which address family should be used by sshd(8). Valid arguments... ' (use IPv4 only), or ''inet6'' (use IPv6 only). AddressFamily any # Specifies the local addresses sshd(8) should listen on. The following # forms may be used: #
- Datenerstbefüllung des OpenLDAP Servers unter CentOS 7.x @centos:ldap_c7
- # 9.3.2. Text Encoded O/R Address # # The Text Encoded O/R Address attribute type specifies a text encoding # of an X.400 O/R address, as specified in RFC 987. The use of this # ... # textEncodedORAddress ATTRIBUTE #
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Grundinstallation und Konfiguration @centos:mail_c7:php7
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Ansible - erweiterte Konfigurationsbeispiele: Ansible-Controll-Node und SSH-Jumphosts @linux:ansible
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible