Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- or in numeric form (IP address or port number). Host information may be enclos... f hard-coding loopback IP address information in master.cf or in main.cf. ... request specifies a queue file, a sender address, a domain or host to deliver to, and recip... e list by preference, and connects to each listed address until it finds a server that responds.
- DHCP-Server Konfigurieren unter CentOS 7.x @centos
- t their own network configuration information (IP address, subnetmask, broadcast address, etc.) from a DHCP server. The overall purpose of DHCP is to make it easier... ation, which tells dhcpd how to recognize that an address is on that subnet. A subnet declaration i... subnet and shared-network declarations for the IP address assigned to the client. Each of these dec
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- chronyc. It can be specified with a hostname, IP address, or path to the local Unix domain sock... This is the reference ID and name (or IP address) of the server to which the computer is currently... IPv4 addresses, the reference ID is equal to the address and for IPv6 addresses it is the first 32 bits of the MD5 sum of the address. If the reference ID is 7F7F0101
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7 @centos:mail_c7
- error message, time ($localtime), client ($client_address) and server ($server_name). # Django : 2019-01-2... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie... = unverified_recipient_reject_reason = Recipient address lookup failed # Django : 2019-01-27 - Adressveri... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7 @centos:mail_c7
- error message, time ($localtime), client ($client_address) and server ($server_name). # Django : 2014-10-1... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie... = unverified_recipient_reject_reason = Recipient address lookup failed # Django : 2014-10-24 - Adressveri... code # zurückgeben. Lediglich "Recipient address lookup failed" zurückmelden. # default: unverifie
- Grundabsicherung von Postfix @centos:mail_c6
- ction # When pattern matches a mail address, domain or host # address, perform the corresponding action. # # blank lines and com... ues a logi- # cal line. # # EMAIL ADDRESS PATTERNS # With lookups from indexed files... domain # Matches the specified mail address. # # domain.tld # Matches
- Secure Shell - ssh unter CentOS 7.x @centos
- SIS ssh [-1246AaCfgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec] [-D [bind_address:]port] [-E log_file] [-e escape_char] [-F configfile] [-I pkcs11] [-i identity_file] [-L [bind_address:]port:host:hostport] [-l login_name] [-m mac_spec... cipher | cipher-auth | mac | kex | key] [-R [bind_address:]port:host:hostport] [-S ctl_path] [-W h
- Router Advertisements mit radvd unter Arch Linux einrichten und nutzen @linux
- er habe ich auch noch eine **U**nique **L**ocal **Address** (**[[https://de.wikipedia.org/wiki/IPv6#Unique_... Optionen (Präfix, MTU, DNS, SLLA - Src Link-Layer Address). Die wichtigsten Optionen sind hierbei: * **Address Autoconfiguration A-Flag** : Eine '1' bedeutet, d... onen nützlich ist, wenn der Client SLAAC-StatelessAddress Autoconfiguration durchführt. * **Router-Präf
- Installation und Konfigurationsdateien von Postfix 3 unter CentOS 7.x @centos:mail_c7
- entOS. # The mirror system uses the connecting IP address of the client and the # update status of each mir... AREADME /usr/share/doc/postfix-3.3.2/README_FILES/ADDRESS_CLASS_README /usr/share/doc/postfix-3.3.2/README_FILES/ADDRESS_REWRITING_README /usr/share/doc/postfix-3.3.2/README_FILES/ADDRESS_VERIFICATION_README /usr/share/doc/postfix-3.3.2/
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- achieved so far. The two main areas still to address are 1. The syst... n the 192.168.165.x subnet and that the master's address is 192.168.169.170) ... The second command allows any node with an IPv4 address of the form 1.2.x.y (with x and y arbitrary) to ... the third command allows any node with an IPv4 address of the form 3.4.5.x to have client NTP access. T
- SNMP (unter CentOS 6.x) @centos:cacti_c6
- ELOW TO # SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. ## sec.name source commun... included at.atTable.atEntry.atPhysAddress #view rwview included at.atTable.atEntry.atNetAddress #view rwview included ip.ipFor... NetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress #view rwview included ip.ipNet
- Installation und Konfigurationsdateien von Postfix unter CentOS 7.x @centos:mail_c7
- README /usr/share/doc/postfix-2.10.1/README_FILES/ADDRESS_CLASS_README /usr/share/doc/postfix-2.10.1/README_FILES/ADDRESS_REWRITING_README /usr/share/doc/postfix-2.10.1/README_FILES/ADDRESS_VERIFICATION_README /usr/share/doc/postfix-2.10.1... /usr/share/doc/postfix-2.11.6/README_FILES/ADDRESS_CLASS_README
- DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen @linux
- osa_server_proxy> Client -> Server : DHCPREQUEST Address 10.0.10.230 note right : DHCP4_INIT_REBOOT @end... fd77: client is in INIT-REBOOT state and requests address 10.0.10.230</pre></html> Die Dritte Meldung mit ... a_server_proxy> Client <- Server : DHCPOFFER mit Address 10.0.10.231 note right : DHCP4_LEASE_OFFER DHCP4... fd77: client is in INIT-REBOOT state and requests address 10.0.10.230 2024-07-04 13:23:13.726 INFO [kea-dh
- SKS Keyserver unter CentOS 7.x installieren und betreiben @centos:web_c7
- he OpenPGP.js project. - Change the default hkp_address and recon_address to making the default configuration support IPv6. (Requires OCaml 3.11.0 or newer) ... Set recon port number. -recon_address Set recon binding addresses. Can be a... port Set hkp port number. -hkp_address Set hkp binding addresses. Can be a l
- Logdatenanalyse mit graylog v2 unter CentOS 7.x @centos:web_c7
- ctions (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0... -------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # # network.host... ze (KB) # - memlock - max locked-in-memory address space (KB) # - nofile - max number of open
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Grundinstallation und Konfiguration @centos:mail_c7:php7