# DansGuardian config file for version 2.10.1.1 # **NOTE** as of version 2.7.5 most of the list files are now in dansguardianf1.conf # Web Access Denied Reporting (does not affect logging) # # -1 = log, but do not block - Stealth mode # 0 = just say 'Access Denied' # 1 = report why but not what denied phrase # 2 = report fully # 3 = use HTML template file (accessdeniedaddress ignored) - recommended # reportinglevel = 3 # Language dir where languages are stored for internationalisation. # The HTML template within this dir is only used when reportinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl cgi script. This option is faster, cleaner # and easier to customise the access denied page. # The language file is used no matter what setting however. # languagedir = '/usr/share/dansguardian/languages' # language to use from languagedir. # Django 2011-11-15 # Default: language = 'ukenglish' language = 'german' # Logging Settings # # 0 = none 1 = just denied 2 = all text based 3 = all requests # Django 2011-11-15 Anpassen des Log-Levels # default : loglevel = 2 loglevel = 1 # Log Exception Hits # Log if an exception (user, ip, URL, phrase) is matched and so # the page gets let through. Can be useful for diagnosing # why a site gets through the filter. # 0 = never log exceptions # 1 = log exceptions, but do not explicitly mark them as such # 2 = always log & mark exceptions (default) logexceptionhits = 2 # Log File Format # 1 = DansGuardian format (space delimited) # 2 = CSV-style format # 3 = Squid Log File Format # 4 = Tab delimited logfileformat = 1 # truncate large items in log lines #maxlogitemlength = 400 # anonymize logs (blank out usernames & IPs) #anonymizelogs = on # Syslog logging # # Use syslog for access logging instead of logging to the file # at the defined or built-in "loglocation" #syslog = on # Log file location # # Defines the log directory and filename. #loglocation = '/var/log/dansguardian/access.log' # Statistics log file location # # Defines the stat file directory and filename. # Only used in conjunction with maxips > 0 # Once every 3 minutes, the current number of IPs in the cache, and the most # that have been in the cache since the daemon was started, are written to this # file. IPs persist in the cache for 7 days. #statlocation = '/var/log/dansguardian/stats' # Network Settings # # the IP that DansGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs, loopback, modem, etc. # Normally you would have your firewall protecting this, but if you want # you can limit it to a certain IP. To bind to multiple interfaces, # specify each IP on an individual filterip line. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on proxyport = 3128 # Whether to retrieve the original destination IP in transparent proxy # setups and check it against the domain pulled from the HTTP headers. # # Be aware that when visiting sites which use a certain type of round-robin # DNS for load balancing, DG may mark requests as invalid unless DG gets # exactly the same answers to its DNS requests as clients. The chances of # this happening can be increased if all clients and servers on the same LAN # make use of a local, caching DNS server instead of using upstream DNS # directly. # # See http://www.kb.cert.org/vuls/id/435052 # on (default) | off #!! Not compiled !! originalip = on # accessdeniedaddress is the address of your web server to which the cgi # dansguardian reporting script was copied. Only used in reporting levels 1 and 2. # # This webserver must be either: # 1. Non-proxied. Either a machine on the local network, or listed as an exception # in your browser's proxy configuration. # 2. Added to the exceptionsitelist. Option 1 is preferable; this option is # only for users using both transparent proxying and a non-local server # to host this script. # # Individual filter groups can override this setting in their own configuration. # # Django 2011-11-15 # default : accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl' # accessdeniedaddress = 'http://nausch.org/cgi-bin/dansguardian.pl' # Non standard delimiter (only used with accessdeniedaddress) # To help preserve the full banned URL, including parameters, the variables # passed into the access denied CGI are separated using non-standard # delimiters. This can be useful to ensure correct operation of the filter # bypass modes. Parameters are split using "::" in place of "&", and "==" in # place of "=". # Default is enabled, but to go back to the standard mode, disable it. nonstandarddelimiter = on # Banned image replacement # Images that are banned due to domain/url/etc reasons including those # in the adverts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and remove broken image # icons from banned domains. # on (default) | off usecustombannedimage = on custombannedimagefile = '/usr/share/dansguardian/transparent1x1.gif' # Filter groups options # filtergroups sets the number of filter groups. A filter group is a set of content # filtering options you can apply to a group of users. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where N is the filter # group. To assign users to groups use the filtergroupslist option. All users default # to filter group 1. You must have some sort of authentication to be able to map users # to a group. The more filter groups the more copies of the lists will be in RAM so # use as few as possible. # Django 2011-11-15 # Default: filtergroups = 1 # Definition der Filtergruppen # # ----------------------------- # Gruppe 1 = Default # ----------------------------- # Gruppe 2 = Default mit ByPass # ----------------------------- # Gruppe 3 = logging only # ----------------------------- # Gruppe 4 = banned useres # ----------------------------- # Gruppe 5 = Spezialisten # ----------------------------- # filtergroups = 5 filtergroupslist = '/etc/dansguardian/lists/filtergroupslist' # Authentication files location bannediplist = '/etc/dansguardian/lists/bannediplist' exceptioniplist = '/etc/dansguardian/lists/exceptioniplist' # Show weighted phrases found # If enabled then the phrases found that made up the total which excedes # the naughtyness limit will be logged and, if the reporting level is # high enough, reported. on | off showweightedfound = on # Weighted phrase mode # There are 3 possible modes of operation: # 0 = off = do not use the weighted phrase feature. # 1 = on, normal = normal weighted phrase operation. # 2 = on, singular = each weighted phrase found only counts once on a page. # weightedphrasemode = 2 # Positive (clean) result caching for URLs # Caches good pages so they don't need to be scanned again. # It also works with AV plugins. # 0 = off (recommended for ISPs with users with disimilar browsing) # 1000 = recommended for most users # 5000 = suggested max upper limit # If you're using an AV plugin then use at least 5000. urlcachenumber = 1000 # # Age before they are stale and should be ignored in seconds # 0 = never # 900 = recommended = 15 mins urlcacheage = 900 # Clean cache for content (AV) scan results # By default, to save CPU, files scanned and found to be # clean are inserted into the clean cache and NOT scanned # again for a while. If you don't like this then choose # to disable it. # (on|off) default = on. scancleancache = on # Smart, Raw and Meta/Title phrase content filtering options # Smart is where the multiple spaces and HTML are removed before phrase filtering # Raw is where the raw HTML including meta tags are phrase filtered # Meta/Title is where only meta and title tags are phrase filtered (v. quick) # CPU usage can be effectively halved by using setting 0 or 1 compared to 2 # 0 = raw only # 1 = smart only # 2 = both of the above (default) # 3 = meta/title phrasefiltermode = 2 # Lower casing options # When a document is scanned the uppercase letters are converted to lower case # in order to compare them with the phrases. However this can break Big5 and # other 16-bit texts. If needed preserve the case. As of version 2.7.0 accented # characters are supported. # 0 = force lower case (default) # 1 = do not change case # 2 = scan first in lower case, then in original case preservecase = 0 # Note: # If phrasefiltermode and preserve case are both 2, this equates to 4 phrase # filtering passes. If you have a large enough userbase for this to be a # worry, and need to filter pages in exotic character encodings, it may be # better to run two instances on separate servers: one with preservecase 1 # (and possibly forcequicksearch 1) and non ASCII/UTF-8 phrase lists, and one # with preservecase 0 and ASCII/UTF-8 lists. # Hex decoding options # When a document is scanned it can optionally convert %XX to chars. # If you find documents are getting past the phrase filtering due to encoding # then enable. However this can break Big5 and other 16-bit texts. # off = disabled (default) # on = enabled hexdecodecontent = off # Force Quick Search rather than DFA search algorithm # The current DFA implementation is not totally 16-bit character compatible # but is used by default as it handles large phrase lists much faster. # If you wish to use a large number of 16-bit character phrases then # enable this option. # off (default) | on (Big5 compatible) forcequicksearch = off # Reverse lookups for banned site and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and search for both in the banned site and URL lists. This would # prevent a user from simply entering the IP for a banned address. # It will reduce searching speed somewhat so unless you have a local caching # DNS server, leave it off and use the Blanket IP Block option in the # bannedsitelist file instead. reverseaddresslookups = off # Reverse lookups for banned and exception IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer. This means you can put in hostnames in # the exceptioniplist and bannediplist. # If a client computer is matched against an IP given in the lists, then the # IP will be recorded in any log entries; if forward DNS is successful and a # match occurs against a hostname, the hostname will be logged instead. # It will reduce searching speed somewhat so unless you have a local DNS server, # leave it off. reverseclientiplookups = off # Perform reverse lookups on client IPs for successful requests. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer, and log host names (where available) rather than # IPs against requests. # This is not dependent on reverseclientiplookups being enabled; however, if it # is, enabling this option does not incur any additional forward DNS requests. logclienthostnames = off # Build bannedsitelist and bannedurllist cache files. # This will compare the date stamp of the list file with the date stamp of # the cache file and will recreate as needed. # If a bsl or bul .processed file exists, then that will be used instead. # It will increase process start speed by 300%. On slow computers this will # be significant. Fast computers do not need this option. on | off createlistcachefiles = on # POST protection (web upload and forms) # does not block forms without any file upload, i.e. this is just for # blocking or limiting uploads # measured in kibibytes after MIME encoding and header bumph # use 0 for a complete block # use higher (e.g. 512 = 512Kbytes) for limiting # use -1 for no blocking #maxuploadsize = 512 #maxuploadsize = 0 maxuploadsize = -1 # Max content filter size # Sometimes web servers label binary files as text which can be very # large which causes a huge drain on memory and cpu resources. # To counter this, you can limit the size of the document to be # filtered and get it to just pass it straight through. # This setting also applies to content regular expression modification. # The value must not be higher than maxcontentramcachescansize # The size is in Kibibytes - eg 2048 = 2Mb # use 0 to set it to maxcontentramcachescansize maxcontentfiltersize = 256 # Max content ram cache scan size # This is only used if you use a content scanner plugin such as AV # This is the max size of file that DG will download and cache # in RAM. After this limit is reached it will cache to disk # This value must be less than or equal to maxcontentfilecachescansize. # The size is in Kibibytes - eg 10240 = 10Mb # use 0 to set it to maxcontentfilecachescansize # This option may be ignored by the configured download manager. maxcontentramcachescansize = 2000 # Max content file cache scan size # This is only used if you use a content scanner plugin such as AV # This is the max size file that DG will download # so that it can be scanned or virus checked. # This value must be greater or equal to maxcontentramcachescansize. # The size is in Kibibytes - eg 10240 = 10Mb maxcontentfilecachescansize = 20000 # File cache dir # Where DG will download files to be scanned if too large for the # RAM cache. filecachedir = '/tmp' # Delete file cache after user completes download # When a file gets save to temp it stays there until it is deleted. # You can choose to have the file deleted when the user makes a sucessful # download. This will mean if they click on the link to download from # the temp store a second time it will give a 404 error. # You should configure something to delete old files in temp to stop it filling up. # on|off (defaults to on) deletedownloadedtempfiles = on # Initial Trickle delay # This is the number of seconds a browser connection is left waiting # before first being sent *something* to keep it alive. The # *something* depends on the download manager chosen. # Do not choose a value too low or normal web pages will be affected. # A value between 20 and 110 would be sensible # This may be ignored by the configured download manager. initialtrickledelay = 20 # Trickle delay # This is the number of seconds a browser connection is left waiting # before being sent more *something* to keep it alive. The # *something* depends on the download manager chosen. # This may be ignored by the configured download manager. trickledelay = 10 # Download Managers # These handle downloads of files to be filtered and scanned. # They differ in the method they deal with large downloads. # Files usually need to be downloaded 100% before they can be # filtered and scanned before being sent on to the browser. # Normally the browser can just wait, but with content scanning, # for example to AV, the browser may timeout or the user may get # confused so the download manager has to do some sort of # 'keep alive'. # # There are various methods possible but not all are included. # The author does not have the time to write them all so I have # included a plugin systam. Also, not all methods work with all # browsers and clients. Specifically some fancy methods don't # work with software that downloads updates. To solve this, # each plugin can support a regular expression for matching # the client's user-agent string, and lists of the mime types # and extensions it should manage. # # Note that these are the matching methods provided by the base plugin # code, and individual plugins may override or add to them. # See the individual plugin conf files for supported options. # # The plugins are matched in the order you specify and the last # one is forced to match as the default, regardless of user agent # and other matching mechanisms. # downloadmanager = '/etc/dansguardian/downloadmanagers/fancy.conf' #downloadmanager = '/etc/dansguardian/downloadmanagers/trickle.conf' downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf' # Content Scanners (Also known as AV scanners) # These are plugins that scan the content of all files your browser fetches # for example to AV scan. The options are limitless. Eventually all of # DansGuardian will be plugin based. You can have more than one content # scanner. The plugins are run in the order you specify. # This is one of the few places you can have multiple options of the same name. # # Some of the scanner(s) require 3rd party software and libraries eg clamav. # See the individual plugin conf file for more options (if any). # #!! Not compiled !! contentscanner = '/etc/dansguardian/contentscanners/clamav.conf' #contentscanner = '/etc/dansguardian/contentscanners/clamdscan.conf' #!! Unimplemented !! contentscanner = '/etc/dansguardian/contentscanners/kavav.conf' #contentscanner = '/etc/dansguardian/contentscanners/kavdscan.conf' #contentscanner = '/etc/dansguardian/contentscanners/icapscan.conf' #contentscanner = '/etc/dansguardian/contentscanners/commandlinescan.conf' # Content scanner timeout # Some of the content scanners support using a timeout value to stop # processing (eg AV scanning) the file if it takes too long. # If supported this will be used. # The default of 60 seconds is probably reasonable. contentscannertimeout = 60 # Content scan exceptions # If 'on' exception sites, urls, users etc will be scanned # This is probably not desirable behavour as exceptions are # supposed to be trusted and will increase load. # Correct use of grey lists are a better idea. # (on|off) default = off contentscanexceptions = off # Auth plugins # These replace the usernameidmethod* options in previous versions. They # handle the extraction of client usernames from various sources, such as # Proxy-Authorisation headers and ident servers, enabling requests to be # handled according to the settings of the user's filter group. # Multiple plugins can be specified, and will be queried in order until one # of them either finds a username or throws an error. For example, if Squid # is configured with both NTLM and Basic auth enabled, and both the 'proxy-basic' # and 'proxy-ntlm' auth plugins are enabled here, then clients which do not support # NTLM can fall back to Basic without sacrificing access rights. # # If you do not use multiple filter groups, you need not specify this option. # #authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' #authplugin = '/etc/dansguardian/authplugins/proxy-digest.conf' #authplugin = '/etc/dansguardian/authplugins/proxy-ntlm.conf' #authplugin = '/etc/dansguardian/authplugins/ident.conf' #authplugin = '/etc/dansguardian/authplugins/ip.conf' # Django 2011-11-15 Username im Logfile mit ausgeben # default : NULL authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' # Re-check replaced URLs # As a matter of course, URLs undergo regular expression search/replace (urlregexplist) # *after* checking the exception site/URL/regexpURL lists, but *before* checking against # the banned site/URL lists, allowing certain requests that would be matched against the # latter in their original state to effectively be converted into grey requests. # With this option enabled, the exception site/URL/regexpURL lists are also re-checked # after replacement, making it possible for URL replacement to trigger exceptions based # on them. # Defaults to off. recheckreplacedurls = off # Misc settings # if on it adds an X-Forwarded-For: to the HTTP request # header. This may help solve some problem sites that need to know the # source ip. on | off forwardedfor = off # if on it uses the X-Forwarded-For: to determine the client # IP. This is for when you have squid between the clients and DansGuardian. # Warning - headers are easily spoofed. on | off usexforwardedfor = off # if on it logs some debug info regarding fork()ing and accept()ing which # can usually be ignored. These are logged by syslog. It is safe to leave # it on or off logconnectionhandlingerrors = on # Fork pool options # If on, this causes DG to write to the log file whenever child processes are # created or destroyed (other than by crashes). This information can help in # understanding and tuning the following parameters, but is not generally # useful in production. logchildprocesshandling = off # sets the maximum number of processes to spawn to handle the incoming # connections. Max value usually 250 depending on OS. # On large sites you might want to try 180. # Django 2011-11-15 # default maxchildren = 120 maxchildren = 80 # sets the minimum number of processes to spawn to handle the incoming connections. # On large sites you might want to try 32. # Django 2011-11-15 # default minchildren = 8 minchildren = 4 # sets the minimum number of processes to be kept ready to handle connections. # On large sites you might want to try 8. # Django 2011-11-15 # default minsparechildren = 4 minsparechildren = 2 # sets the minimum number of processes to spawn when it runs out # On large sites you might want to try 10. # Django 2011-11-15 # default preforkchildren = 6 preforkchildren = 4 # sets the maximum number of processes to have doing nothing. # When this many are spare it will cull some of them. # On large sites you might want to try 64. # Django 2011-11-15 # default maxsparechildren = 32 maxsparechildren = 8 # sets the maximum age of a child process before it croaks it. # This is the number of connections they handle before exiting. # On large sites you might want to try 10000. maxagechildren = 500 # Sets the maximum number client IP addresses allowed to connect at once. # Use this to set a hard limit on the number of users allowed to concurrently # browse the web. Set to 0 for no limit, and to disable the IP cache process. maxips = 0 # Process options # (Change these only if you really know what you are doing). # These options allow you to run multiple instances of DansGuardian on a single machine. # Remember to edit the log file path above also if that is your intention. # IPC filename # # Defines IPC server directory and filename used to communicate with the log process. ipcfilename = '/tmp/.dguardianipc' # URL list IPC filename # # Defines URL list IPC server directory and filename used to communicate with the URL # cache process. urlipcfilename = '/tmp/.dguardianurlipc' # IP list IPC filename # # Defines IP list IPC server directory and filename, for communicating with the client # IP cache process. ipipcfilename = '/tmp/.dguardianipipc' # PID filename # # Defines process id directory and filename. #pidfilename = '/var/run/dansguardian.pid' # Disable daemoning # If enabled the process will not fork into the background. # It is not usually advantageous to do this. # on|off (defaults to off) nodaemon = off # Disable logging process # on|off (defaults to off) nologger = off # Enable logging of "ADs" category blocks # on|off (defaults to off) logadblocks = off # Enable logging of client User-Agent # Some browsers will cause a *lot* of extra information on each line! # on|off (defaults to off) loguseragent = off # Daemon runas user and group # This is the user that DansGuardian runs as. Normally the user/group nobody. # Uncomment to use. Defaults to the user set at compile time. # Temp files created during virus scanning are given owner and group read # permissions; to use content scanners based on external processes, such as # clamdscan, the two processes must run with either the same group or user ID. #daemonuser = 'dansguardian' #daemongroup = 'dansguardian' # Soft restart # When on this disables the forced killing off all processes in the process group. # This is not to be confused with the -g run time option - they are not related. # on|off (defaults to off) softrestart = off # Mail program # Path (sendmail-compatible) email program, with options. # Not used if usesmtp is disabled (filtergroup specific). mailer = '/usr/sbin/sendmail -t'