Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- centos:mail_c6:mta_11 [25.02.2013 19:21. ] – [Installation] django
+++ centos:mail_c6:mta_11 [22.07.2019 15:07. ] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 1: / Zeile 1: @@
+====== Mailserver - Logfileauswertungen unter CentOS 6.x ======
+Damit wir uns im laufenden Betrieb regelmäßigen über den aktuellen Status ein Bildmachen können, ohne dazu extra langwierig im Logfile unseres Mailservers herumzusuchen, stehen uns mehrere Hilfsprogramme zur Verfügung.
+Im Detail wollen wir uns nun drei der Varianten genauer ansehen.
+  - **[[centos:mail_c6:mta_11#pflogsumm|pflogsumm]]** Logfilezusammenfassung generieren und via eMail dem postmaster zur Verfügung stellen.
+  - WEB-GUIs Graphisch sehr ansprechende Logfilezusammenfassung generieren und zum Abrufen via Browser anbieten
+    - **[[centos:mail_c6:mta_11#mailgraph|mailgraph]]**
+    - **[[centos:mail_c6:mta_11#queuegraph|queuegraph]]**
+    - **[[centos:mail_c6:mta_11#greygraph|greygraph]]**
+    - **[[centos:mail_c6:mta_11#mxgraphs|mxgraphs]]**
+    - **[[centos:mail_c6:mta_11#mxgraphs_und_dmarc_co|mxpraphs (DMARC & Co)]]**
+  - **[[centos:mail_c6:mta_11#awstats|AWStats]]** Logfilezusammenfassung generieren und zum Abrufen via Browser anbieten
+===== pflogsumm =====
+Mit Hilfe dieses kleinen Perlscriptes können wir uns einen täglichen Statusbericht unseres Mailservers erstellen lassen und wissen so das was unserem MX widerfahren ist. :) Das Perlscript **pflogsumm** wertet hierzu das Logfile //**/var/log/maillog**// unseres Mailservers aus.
+==== Installation ====
+Das Perlscript **pflogsumm** befindet sich unter CentOS 6.x im Paket **//postfix-perl-scripts//**. Die Installation dieses Paketes gestaltet sich im gewohnten Maße sehr einfach mit Hilfe von **YUM**.
+  # yum install postfix-perl-scripts -y
+Was uns bei der Installation dieses Paketes alles mitgebracht wurde, zeigt uns folgender Aufruf.
+  # rpm -qil postfix-perl-scripts
+<code>Name        : postfix-perl-scripts         Relocations: (not relocatable)
+Version     : 2.6.6                             Vendor: CentOS
+Release     : 2.2.el6_1                     Build Date: Sat 03 Dec 2011 06:01:00 AM CET
+Install Date: Sun 03 Jun 2012 07:18:19 PM CEST      Build Host: c6b18n3.bsys.dev.centos.org
+Group       : Applications/System           Source RPM: postfix-2.6.6-2.2.el6_1.src.rpm
+Size        : 106404                           License: IBM
+Signature   : RSA/SHA1, Wed 07 Dec 2011 07:15:05 PM CET, Key ID 0946fca2c105b9de
+Packager    : CentOS BuildSystem <http://bugs.centos.org>
+URL         : http://www.postfix.org
+Summary     : Postfix utilities written in perl
+Description :
+This package contains perl scripts pflogsumm and qshape.
+Pflogsumm is a log analyzer/summarizer for the Postfix MTA. It is
+designed to provide an over-view of Postfix activity. Pflogsumm
+generates summaries and, in some cases, detailed reports of mail
+server traffic volumes, rejected and bounced email, and server
+warnings, errors and panics.
+qshape prints Postfix queue domain and age distribution.
+/usr/sbin/pflogsumm
+/usr/sbin/qshape
+/usr/share/doc/postfix-2.6.6/pflogsumm-faq.txt
+/usr/share/man/man1/pflogsumm.1.gz
+/usr/share/man/man1/qshape.1.gz
+</code>
+==== Optionen beim Programmaufruf====
+Hinweise zur Konfiguration oder besser gesagt über die Optionen beim Aufruf des Programms zeigt ein Blick in die Manpage von **pflogsumm**.
+<code>PFLOGSUMM(1)          User Contributed Perl Documentation         PFLOGSUMM(1)
+NAME
+       pflogsumm.pl - Produce Postfix MTA logfile summary
+       Copyright (C) 1998-2007 by James S. Seymour, Release 1.1.1.
+SYNOPSIS
+           pflogsumm.pl -[eq] [-d <today│yesterday>] [-h <cnt>] [-u <cnt>]
+               [--verp_mung[=<n>]] [--verbose_msg_detail] [--iso_date_time]
+               [-m│--uucp_mung] [-i│--ignore_case] [--smtpd_stats] [--mailq]
+               [--problems_first] [--rej_add_from] [--no_bounce_detail]
+               [--no_deferral_detail] [--no_reject_detail] [--no_no_msg_size]
+               [--no_smtpd_warnings] [--zero_fill] [--syslog_name=string]
+               [file1 [filen]]
+           pflogsumm.pl -[help│version]
+           If no file(s) specified, reads from stdin.  Output is to stdout.
+DESCRIPTION
+           Pflogsumm is a log analyzer/summarizer for the Postfix MTA.  It is
+           designed to provide an over-view of Postfix activity, with just enough
+           detail to give the administrator a "heads up" for potential trouble
+           spots.
+           Pflogsumm generates summaries and, in some cases, detailed reports of
+           mail server traffic volumes, rejected and bounced email, and server
+           warnings, errors and panics.
+OPTIONS
+           -d today       generate report for just today
+           -d yesterday   generate report for just "yesterday"
+           -e             extended (extreme? excessive?) detail
+                          Emit detailed reports.  At present, this includes
+                          only a per-message report, sorted by sender domain,
+                          then user-in-domain, then by queue i.d.
+                          WARNING: the data built to generate this report can
+                          quickly consume very large amounts of memory if a
+                          lot of log entries are processed!
+           -h <cnt>       top <cnt> to display in host/domain reports.
+= none.
+                          See also: "-u" and "--no_*_detail" for further
+                                    report-limiting options.
+           --help         Emit short usage message and bail out.
+                          (By happy coincidence, "-h" alone does much the same,
+                          being as it requires a numeric argument :-).  Yeah, I
+                          know: lame.)
+           -i
+           --ignore_case  Handle complete email address in a case-insensitive
+                          manner.
+                          Normally pflogsumm lower-cases only the host and
+                          domain parts, leaving the user part alone.  This
+                          option causes the entire email address to be lower-
+                          cased.
+           --iso_date_time
+                          For summaries that contain date or time information,
+                          use ISO 8601 standard formats (CCYY-MM-DD and HH:MM),
+                          rather than "Mon DD CCYY" and "HHMM".
+           -m             modify (mung?) UUCP-style bang-paths
+           --uucp_mung
+                          This is for use when you have a mix of Internet-style
+                          domain addresses and UUCP-style bang-paths in the log.
+                          Upstream UUCP feeds sometimes mung Internet domain
+                          style address into bang-paths.  This option can
+                          sometimes undo the "damage".  For example:
+                          "somehost.dom!username@foo" (where "foo" is the next
+                          host upstream and "somehost.dom" was whence the email
+                          originated) will get converted to
+                          "foo!username@somehost.dom".  This also affects the
+                          extended detail report (-e), to help ensure that by-
+                           domain-by-name sorting is more accurate.
+           --mailq        Run "mailq" command at end of report.
+                          Merely a convenience feature.  (Assumes that "mailq"
+                          is in $PATH.  See "$mailqCmd" variable to path thisi
+                          if desired.)
+           --no_bounce_detail
+           --no_deferral_detail
+           --no_reject_detail
+                          Suppresses the printing of the following detailed
+                          reports, respectively:
+                               message bounce detail (by relay)
+                               message deferral detail
+                               message reject detail
+                          See also: "-u" and "-h" for further report-limiting
+                                    options.
+           --no_no_msg_size
+                           Do not emit report on "Messages with no size data".
+                           Message size is reported only by the queue manager.
+                           The message may be delivered long-enough after the
+                           (last) qmgr log entry that the information is not in
+                           the log(s) processed by a particular run of
+                           pflogsumm.pl.  This throws off "Recipients by message
+                           size" and the total for "bytes delivered." These are
+                           normally reported by pflogsumm as "Messages with no
+                           size data."
+           --no_smtpd_warnings
+                           On a busy mail server, say at an ISP, SMTPD warnings
+                           can result in a rather sizeable report.  This option
+                           turns reporting them off.
+           --problems_first
+                          Emit "problems" reports (bounces, defers, warnings,
+                          etc.) before "normal" stats.
+           --rej_add_from
+                          For those reject reports that list IP addresses or
+                          host/domain names: append the email from address to
+                          each listing.  (Does not apply to "Improper use of
+                          SMTP command pipelining" report.)
+           -q             quiet - don’t print headings for empty reports
+                          note: headings for warning, fatal, and "master"
+                          messages will always be printed.
+           --smtpd_stats
+                          Generate smtpd connection statistics.
+                          The "per-day" report is not generated for single-day
+                          reports.  For multiple-day reports: "per-hour" numbers
+                          are daily averages (reflected in the report heading).
+           --syslog_name=name
+                          Set syslog_name to look for for Postfix log entries.
+                          By default, pflogsumm looks for entries in logfiles
+                          with a syslog name of "postfix," the default.
+                          If you’ve set a non-default "syslog_name" parameter
+                          in your Postfix configuration, use this option to
+                          tell pflogsumm what that is.
+                          See the discussion about the use of this option under
+                          "NOTES," below.
+           -u <cnt>       top <cnt> to display in user reports. 0 == none.
+                          See also: "-h" and "--no_*_detail" for further
+                                    report-limiting options.
+           --verbose_msg_detail
+                          For the message deferral, bounce and reject summaries:
+                          display the full "reason", rather than a truncated one.
+                          Note: this can result in quite long lines in the report.
+           --verp_mung    do "VERP" generated address (?) munging.  Convert
+           --verp_mung=2  sender addresses of the form
+                          "list-return-NN-someuser=some.dom@host.sender.dom"
+                           to
+                             "list-return-ID-someuser=some.dom@host.sender.dom"
+                           In other words: replace the numeric value with "ID".
+                          By specifying the optional "=2" (second form), the
+                          munging is more "aggressive", converting the address
+                          to something like:
+                               "list-return@host.sender.dom"
+                          Actually: specifying anything less than 2 does the
+                          "simple" munging and anything greater than 1 results
+                          in the more "aggressive" hack being applied.
+                          See "NOTES" regarding this option.
+           --version      Print program name and version and bail out.
+           --zero_fill    "Zero-fill" certain arrays so reports come out with
+                          data in columns that that might otherwise be blank.
+RETURN VALUE
+           Pflogsumm doesn’t return anything of interest to the shell.
+ERRORS
+           Error messages are emitted to stderr.
+EXAMPLES
+           Produce a report of previous day’s activities:
+               pflogsumm.pl -d yesterday /var/log/maillog
+           A report of prior week’s activities (after logs rotated):
+               pflogsumm.pl /var/log/maillog.0
+           What’s happened so far today:
+               pflogsumm.pl -d today /var/log/maillog
+           Crontab entry to generate a report of the previous day’s activity
+           at 10 minutes after midnight.
+0 * * * /usr/local/sbin/pflogsumm -d yesterday /var/log/maillog
+>&1 │/usr/bin/mailx -s "‘uname -n‘ daily mail stats" postmaster
+           Crontab entry to generate a report for the prior week’s activity.
+           (This example assumes one rotates ones mail logs weekly, some time
+           before 4:10 a.m. on Sunday.)
+4 * * 0   /usr/local/sbin/pflogsumm /var/log/maillog.0
+>&1 │/usr/bin/mailx -s "‘uname -n‘ weekly mail stats" postmaster
+           The two crontab examples, above, must actually be a single line
+           each.  They’re broken-up into two-or-more lines due to page
+           formatting issues.
+SEE ALSO
+           The pflogsumm FAQ: pflogsumm-faq.txt.
+NOTES
+           Pflogsumm makes no attempt to catch/parse non-Postfix log
+           entries.  Unless it has "postfix/" in the log entry, it will be
+           ignored.
+           It’s important that the logs are presented to pflogsumm in
+           chronological order so that message sizes are available when
+           needed.
+           For display purposes: integer values are munged into "kilo" and
+           "mega" notation as they exceed certain values.  I chose the
+           admittedly arbitrary boundaries of 512k and 512m as the points at
+           which to do this--my thinking being 512x was the largest number
+           (of digits) that most folks can comfortably grok at-a-glance.
+           These are "computer" "k" and "m", not 1000 and 1,000,000.  You
+           can easily change all of this with some constants near the
+           beginning of the program.
+           "Items-per-day" reports are not generated for single-day
+           reports.  For multiple-day reports: "Items-per-hour" numbers are
+           daily averages (reflected in the report headings).
+           Message rejects, reject warnings, holds and discards are all
+           reported under the "rejects" column for the Per-Hour and Per-Day
+           traffic summaries.
+           Verp munging may not always result in correct address and
+           address-count reduction.
+           Verp munging is always in a state of experimentation.  The use
+           of this option may result in inaccurate statistics with regards
+           to the "senders" count.
+           UUCP-style bang-path handling needs more work.  Particularly if
+           Postfix is not being run with "swap_bangpath = yes" and/or *is* being
+           run with "append_dot_mydomain = yes", the detailed by-message report
+           may not be sorted correctly by-domain-by-user.  (Also depends on
+           upstream MTA, I suspect.)
+           The "percent rejected" and "percent discarded" figures are only
+           approximations.  They are calculated as follows (example is for
+           "percent rejected"):
+               percent rejected =
+                   (rejected / (delivered + rejected + discarded)) * 100
+           There are some issues with the use of --syslog_name.  The problem is
+           that, even with $syslog_name set, Postfix will sometimes still log
+           things with "postfix" as the syslog_name.  This is noted in
+           /etc/postfix/sample-misc.cf:
+               # Beware: a non-default syslog_name setting takes effect only
+               # after process initialization. Some initialization errors will be
+               # logged with the default name, especially errors while parsing
+               # the command line and errors while accessing the Postfix main.cf
+               # configuration file.
+           As a consequence, pflogsumm must always look for "postfix," in logs,
+           as well as whatever is supplied for syslog_name.
+           Where this becomes an issue is where people are running two or more
+           instances of Postfix, logging to the same file.  In such a case:
+               . Neither instance may use the default "postfix" syslog name
+                 and...
+               . Log entries that fall victim to what’s described in
+                 sample-misc.cf will be reported under "postfix", so that if
+                 you’re running pflogsumm twice, once for each syslog_name, such
+                 log entries will show up in each report.
+           The Pflogsumm Home Page is at:
+               http://jimsun.LinxNet.com/postfix_contrib.html
+REQUIREMENTS
+           For certain options (e.g.: --smtpd_stats), Pflogsumm requires the
+           Date::Calc module, which can be obtained from CPAN at
+           http://www.perl.com.
+           Pflogsumm is currently written and tested under Perl 5.8.3.
+           As of version 19990413-02, pflogsumm worked with Perl 5.003, but
+           future compatibility is not guaranteed.
+LICENSE
+           This program is free software; you can redistribute it and/or
+           modify it under the terms of the GNU General Public License
+           as published by the Free Software Foundation; either version 2
+           of the License, or (at your option) any later version.
+           This program is distributed in the hope that it will be useful,
+           but WITHOUT ANY WARRANTY; without even the implied warranty of
+           MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+           GNU General Public License for more details.
+           You may have received a copy of the GNU General Public License
+           along with this program; if not, write to the Free Software
+           Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307,
+           USA.
+           An on-line copy of the GNU General Public License can be found
+           http://www.fsf.org/copyleft/gpl.html.
+.1.1                             2007-04-06                      PFLOGSUMM(1)
+</code>
+Mit der Option **-help** werden die entsprechenden Optionen ebenfalls in Kurzform angezeigt.
+   # pflogsumm -help
+<code>usage: pflogsumm.pl -[eq] [-d <today|yesterday>] [-h <cnt>] [-u <cnt>]
+       [--verp_mung[=<n>]] [--verbose_msg_detail] [--iso_date_time]
+       [-m|--uucp_mung] [-i|--ignore_case] [--smtpd_stats] [--mailq]
+       [--problems_first] [--rej_add_from] [--no_bounce_detail]
+       [--no_deferral_detail] [--no_reject_detail] [--no_no_msg_size]
+       [--no_smtpd_warnings] [--zero_fill] [--syslog_name=name]
+       [file1 [filen]]
+       pflogsumm.pl --[version|help]
+</code>
+==== manueller Programmaufruf ====
+Wollen wir uns einen Bericht des heutigen Tages ansehen, so generieren wir diesen on-the-fly mit:
+  # /usr/sbin/pflogsumm -d today /var/log/maillog
+Interessiert uns was gestern los war, so lautet der Aufgruf ganz einfach:
+  # /usr/sbin/pflogsumm -d yesterday /var/log/maillog
+==== automatischer Programmaufruf ====
+Für die tägliche Erstellung unserer Mailserverstatistik bemühen wir nun ganz einfach unseres cron-deamon.
+Hierzu legen wir mit dem Editor unserer Wahl eine betreffende Konfigurationsdatei an, bzw. ergänzen die bereits vorhandene Datei.
+  # vim /etc/crontab
+<code># Django : 2012-07-03
+#täglicher Statusbericht unseres Mailservers postfix
+0 * * * root /usr/sbin/pflogsumm -d yesterday /var/log/maillog 2>&1 | /bin/mailx -s "‘uname -n‘ daily mail stats" postmaster
+</code>
+Täglich um 00:10 Uhr wird die Statistik des letzten Tages erstellt und mittels **mailx** als eMail an den postmaster verschickt.
+<code>Date: Mon, 13 Oct 2008 00:10:03 +0200 (CEST)
+From: root <root@nausch.org>
+To: postmaster@nausch.org
+Subject: ‘uname -n‘ daily mail stats
+Postfix log summaries for Oct 12
+Grand Totals
+------------
+messages
+   received
+   delivered
+   forwarded
+   deferred
+   bounced
+   rejected (92%)
+   reject warnings
+   held
+   discarded (0%)
+   bytes received
+   bytes delivered
+   senders
+   sending hosts/domains
+   recipients
+   recipient hosts/domains
+Per-Hour Traffic Summary
+    time          received  delivered   deferred    bounced     rejected
+    --------------------------------------------------------------------
+-0100           0          0          0          0          0
+-0200           0          0          0          0          0
+-0300           0          0          0          0          0
+-0400           0          0          0          0          0
+-0500           1          0          0          0          3
+-0600           1          1          0          0         24
+-0700           0          0          0          0         10
+-0800           0          0          0          0          2
+-0900           4          3          0          0          7
+-1000           3          3          0          0         18
+-1100           3          2          0          0         18
+-1200           2          2          0          0         29
+-1300           2          2          0          0         25
+-1400           2          1          0          0         20
+-1500           0          0          0          0         37
+-1600           0          0          0          0         22
+-1700           0          0          0          0         24
+-1800           2          2          0          0         31
+-1900           3          3          0          0         12
+-2000           3          3          0          0         10
+-2100           4          4          0          0         19
+-2200           1          1          0          0          2
+-2300           0          0          0          0         19
+-2400           0          0          0          0          7
+Host/Domain Summary: Message Delivery
+ sent cnt  bytes   defers   avg dly max dly host/domain
+ -------- -------  -------  ------- ------- -----------
+   353252        0     1.3 s    3.6 s  nausch.org
+...
+...
+Fatal Errors: none
+Panics: none
+Master daemon messages
+----------------------
+   reload configuration /etc/postfix
+</code>
+===== mailgraph =====
+Eine ansprechende graphische Übersicht kann mittels [[http://mailgraph.schweikert.ch/|Mailgraph]] erstellt werden. Das passende Paket **mailgraph** installieren wir aus dem [[centos:epel6|Repository epel]].
+==== Installation ====
+Mit Hilfe von **yum** holen wir uns als erstes das benötigte Paket auf unser System.
+   # yum install mailgraph -y
+Den Inhalt des Paketes inspizieren wir bei Bedarf mit folgendem Aufruf.
+   # rpm -qil mailgraph
+<code>Name        : mailgraph                    Relocations: (not relocatable)
+Version     : 1.14                              Vendor: Fedora Project
+Release     : 8.el6                         Build Date: Sat 02 Oct 2010 03:26:31 PM CEST
+Install Date: Tue 03 Jul 2012 03:04:16 PM CEST      Build Host: ppc02.phx2.fedoraproject.org
+Group       : System Environment/Daemons    Source RPM: mailgraph-1.14-8.el6.src.rpm
+Size        : 68312                            License: GPL+
+Signature   : RSA/8, Mon 04 Oct 2010 10:43:13 PM CEST, Key ID 3b49df2a0608b895
+Packager    : Fedora Project
+URL         : http://mailgraph.schweikert.ch/
+Summary     : A RRDtool frontend for Mail statistics
+Description :
+Mailgraph is a very simple mail statistics RRDtool frontend for Postfix and
+Sendmail that produces daily, weekly, monthly and yearly graphs of
+received/sent and bounced/rejected mail.
+/etc/httpd/conf.d/mailgraph.conf
+/etc/rc.d/init.d/mailgraph
+/etc/sysconfig/mailgraph
+/usr/sbin/mailgraph
+/usr/share/doc/mailgraph-1.14
+/usr/share/doc/mailgraph-1.14/CHANGES
+/usr/share/doc/mailgraph-1.14/COPYING
+/usr/share/doc/mailgraph-1.14/README
+/usr/share/mailgraph
+/usr/share/mailgraph/mailgraph.cgi
+/usr/share/mailgraph/mailgraph.css
+/var/cache/mailgraph
+/var/lib/mailgraph
+</code>
+==== Konfiguration ====
+Die Konfiguration von mailgraph selbst gestaltet sich sehr einfach. Über die Konfigurationsdatei //**/etc/sysconfig/mailgraph**// können wir angeben wo das Logfile unseres Mailservers zu finden ist. Unter CentOS ist dies //**/var/log/maillog**//. Mit der Option **--ignore-localhost** können wir mailgraph anweisen, Nachrichten von localhost nicht in die Statistik aufzunehmen, die Mails also nicht „doppelt“ zu zählen, wenn z.B. Postfix _und_ AMaViS auf dem gleichen Host laufen.
+   # vim /etc/sysconfig/mailgraph
+<file hash /etc/sysconfig/mailgraph>MAILLOG=/var/log/maillog
+PRIORITY=-19
+OPTIONS=--ignore-localhost
+</file>
+Will man die Sprache bei der Webseite, oder die Farben anpassen, so nimmt man die Änderungen direkt im CGI-Script vor.
+   # vim /usr/share/mailgraph/mailgraph.cgi
+<file perl /usr/share/mailgraph/mailgraph.cgi>#!/usr/bin/perl -w
+# mailgraph -- postfix mail traffic statistics
+# copyright (c) 2000-2007 ETH Zurich
+# copyright (c) 2000-2007 David Schweikert <david@schweikert.ch>
+# released under the GNU General Public License
+use RRDs;
+use POSIX qw(uname);
+my $VERSION = "1.14";
+my $host = (POSIX::uname())[1];
+my $scriptname = 'mailgraph.cgi';
+my $xpoints = 540;
+my $points_per_sample = 3;
+my $ypoints = 160;
+my $ypoints_err = 96;
+my $rrd = '/var/lib/mailgraph/mailgraph.rrd'; # path to where the RRD database is
+my $rrd_virus = '/var/lib/mailgraph/mailgraph_virus.rrd'; # path to where the Virus RRD database is
+my $tmp_dir = '/var/cache/mailgraph'; # temporary directory where to store the images
+my @graphs = (
+	{ title => 'Letzter Tag',   seconds => 3600*24,        },
+	{ title => 'Letzte  Woche', seconds => 3600*24*7,      },
+	{ title => 'Letzter Monat', seconds => 3600*24*31,     },
+	{ title => 'Letztes Jahr',  seconds => 3600*24*365, },
+);
+my %color = (
+	sent     => '000099', # rrggbb in hex
+	received => '009900',
+	rejected => 'AA0000',
+	bounced  => '000000',
+	virus    => 'DDBB00',
+	spam     => '999999',
+);
+sub rrd_graph(@)
+{
+	my ($range, $file, $ypoints, @rrdargs) = @_;
+	my $step = $range*$points_per_sample/$xpoints;
+	# choose carefully the end otherwise rrd will maybe pick the wrong RRA:
+	my $end  = time; $end -= $end % $step;
+	my $date = localtime(time);
+	$date =~ s|:|\\:|g unless $RRDs::VERSION < 1.199908;
+	my ($graphret,$xs,$ys) = RRDs::graph($file,
+		'--imgformat', 'PNG',
+		'--width', $xpoints,
+		'--height', $ypoints,
+		'--start', "-$range",
+		'--end', $end,
+		'--vertical-label', 'msgs/min',
+		'--lower-limit', 0,
+		'--units-exponent', 0, # don't show milli-messages/s
+		'--lazy',
+		'--color', 'SHADEA#ffffff',
+		'--color', 'SHADEB#ffffff',
+		'--color', 'BACK#ffffff',
+		$RRDs::VERSION < 1.2002 ? () : ( '--slope-mode'),
+		@rrdargs,
+		'COMMENT:['.$date.']\r',
+	);
+	my $ERR=RRDs::error;
+	die "ERROR: $ERR\n" if $ERR;
+}
+sub graph($$)
+{
+	my ($range, $file) = @_;
+	my $step = $range*$points_per_sample/$xpoints;
+	rrd_graph($range, $file, $ypoints,
+		"DEF:sent=$rrd:sent:AVERAGE",
+		"DEF:msent=$rrd:sent:MAX",
+		"CDEF:rsent=sent,60,*",
+		"CDEF:rmsent=msent,60,*",
+		"CDEF:dsent=sent,UN,0,sent,IF,$step,*",
+		"CDEF:ssent=PREV,UN,dsent,PREV,IF,dsent,+",
+		"AREA:rsent#$color{sent}:Sent    ",
+		'GPRINT:ssent:MAX:total\: %8.0lf msgs',
+		'GPRINT:rsent:AVERAGE:avg\: %5.2lf msgs/min',
+		'GPRINT:rmsent:MAX:max\: %4.0lf msgs/min\l',
+		"DEF:recv=$rrd:recv:AVERAGE",
+		"DEF:mrecv=$rrd:recv:MAX",
+		"CDEF:rrecv=recv,60,*",
+		"CDEF:rmrecv=mrecv,60,*",
+		"CDEF:drecv=recv,UN,0,recv,IF,$step,*",
+		"CDEF:srecv=PREV,UN,drecv,PREV,IF,drecv,+",
+		"LINE2:rrecv#$color{received}:Received",
+		'GPRINT:srecv:MAX:total\: %8.0lf msgs',
+		'GPRINT:rrecv:AVERAGE:avg\: %5.2lf msgs/min',
+		'GPRINT:rmrecv:MAX:max\: %4.0lf msgs/min\l',
+	);
+}
+sub graph_err($$)
+{
+	my ($range, $file) = @_;
+	my $step = $range*$points_per_sample/$xpoints;
+	rrd_graph($range, $file, $ypoints_err,
+		"DEF:bounced=$rrd:bounced:AVERAGE",
+		"DEF:mbounced=$rrd:bounced:MAX",
+		"CDEF:rbounced=bounced,60,*",
+		"CDEF:dbounced=bounced,UN,0,bounced,IF,$step,*",
+		"CDEF:sbounced=PREV,UN,dbounced,PREV,IF,dbounced,+",
+		"CDEF:rmbounced=mbounced,60,*",
+		"AREA:rbounced#$color{bounced}:Bounced ",
+		'GPRINT:sbounced:MAX:total\: %8.0lf msgs',
+		'GPRINT:rbounced:AVERAGE:avg\: %5.2lf msgs/min',
+		'GPRINT:rmbounced:MAX:max\: %4.0lf msgs/min\l',
+		"DEF:virus=$rrd_virus:virus:AVERAGE",
+		"DEF:mvirus=$rrd_virus:virus:MAX",
+		"CDEF:rvirus=virus,60,*",
+		"CDEF:dvirus=virus,UN,0,virus,IF,$step,*",
+		"CDEF:svirus=PREV,UN,dvirus,PREV,IF,dvirus,+",
+		"CDEF:rmvirus=mvirus,60,*",
+		"STACK:rvirus#$color{virus}:Viruses ",
+		'GPRINT:svirus:MAX:total\: %8.0lf msgs',
+		'GPRINT:rvirus:AVERAGE:avg\: %5.2lf msgs/min',
+		'GPRINT:rmvirus:MAX:max\: %4.0lf msgs/min\l',
+		"DEF:spam=$rrd_virus:spam:AVERAGE",
+		"DEF:mspam=$rrd_virus:spam:MAX",
+		"CDEF:rspam=spam,60,*",
+		"CDEF:dspam=spam,UN,0,spam,IF,$step,*",
+		"CDEF:sspam=PREV,UN,dspam,PREV,IF,dspam,+",
+		"CDEF:rmspam=mspam,60,*",
+		"STACK:rspam#$color{spam}:Spam    ",
+		'GPRINT:sspam:MAX:total\: %8.0lf msgs',
+		'GPRINT:rspam:AVERAGE:avg\: %5.2lf msgs/min',
+		'GPRINT:rmspam:MAX:max\: %4.0lf msgs/min\l',
+		"DEF:rejected=$rrd:rejected:AVERAGE",
+		"DEF:mrejected=$rrd:rejected:MAX",
+		"CDEF:rrejected=rejected,60,*",
+		"CDEF:drejected=rejected,UN,0,rejected,IF,$step,*",
+		"CDEF:srejected=PREV,UN,drejected,PREV,IF,drejected,+",
+		"CDEF:rmrejected=mrejected,60,*",
+		"LINE2:rrejected#$color{rejected}:Rejected",
+		'GPRINT:srejected:MAX:total\: %8.0lf msgs',
+		'GPRINT:rrejected:AVERAGE:avg\: %5.2lf msgs/min',
+		'GPRINT:rmrejected:MAX:max\: %4.0lf msgs/min\l',
+	);
+}
+sub print_html()
+{
+	print "Content-Type: text/html\n\n";
+	print <<HEADER;
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html>
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
+<title>Mail statistics for $host</title>
+<meta http-equiv="Refresh" content="300" />
+<meta http-equiv="Pragma" content="no-cache" />
+<link rel="stylesheet" href="mailgraph.css" type="text/css" />
+</head>
+<body>
+HEADER
+	print "<h1>Mail Statistik f&uuml;r $host</h1>\n";
+	print "<ul id=\"jump\">\n";
+	for my $n (0..$#graphs) {
+		print "  <li><a href=\"#G$n\">$graphs[$n]{title}</a>&nbsp;</li>\n";
+	}
+	print "</ul>\n";
+	for my $n (0..$#graphs) {
+		print "<h2 id=\"G$n\">$graphs[$n]{title}</h2>\n";
+		print "<p><img src=\"$scriptname?${n}-n\" alt=\"mailgraph\"/><br/>\n";
+		print "<img src=\"$scriptname?${n}-e\" alt=\"mailgraph\"/></p>\n";
+	}
+	print <<FOOTER;
+<hr/>
+<table><tr><td>
+<a href="http://mailgraph.schweikert.ch/">Mailgraph</a> $VERSION
+by <a href="http://david.schweikert.ch/">David Schweikert</a></td>
+<td align="right">
+<a href="http://oss.oetiker.ch/rrdtool/"><img src="rrdtool.gif" alt="" width="120" height="34"/></a>
+</td></tr></table>
+</body></html>
+FOOTER
+}
+sub send_image($)
+{
+	my ($file)= @_;
+	-r $file or do {
+		print "Content-type: text/plain\n\nERROR: can't find $file\n";
+		exit 1;
+	};
+	print "Content-type: image/png\n";
+	print "Content-length: ".((stat($file))[7])."\n";
+	print "\n";
+	open(IMG, $file) or die;
+	my $data;
+	print $data while read(IMG, $data, 16384)>0;
+}
+sub main()
+{
+	my $uri = $ENV{REQUEST_URI} || '';
+	$uri =~ s/\/[^\/]+$//;
+	$uri =~ s/\//,/g;
+	$uri =~ s/(\~|\%7E)/tilde,/g;
+	mkdir $tmp_dir, 0777 unless -d $tmp_dir;
+	mkdir "$tmp_dir/$uri", 0777 unless -d "$tmp_dir/$uri";
+	my $img = $ENV{QUERY_STRING};
+	if(defined $img and $img =~ /\S/) {
+		if($img =~ /^(\d+)-n$/) {
+			my $file = "$tmp_dir/$uri/mailgraph_$1.png";
+			graph($graphs[$1]{seconds}, $file);
+			send_image($file);
+		}
+		elsif($img =~ /^(\d+)-e$/) {
+			my $file = "$tmp_dir/$uri/mailgraph_$1_err.png";
+			graph_err($graphs[$1]{seconds}, $file);
+			send_image($file);
+		}
+		else {
+			die "ERROR: invalid argument\n";
+		}
+	}
+	else {
+		print_html;
+	}
+}
+main;
+</file>
+==== Apache VHost anlegen ====
+Damit wir bequem von unserem Browser aus, die aktuellen Graphiken abfragen können, legen wir nun einen passenden VHost an.
+  # vim /etc/httpd/conf.d/vhosts.conf
+<file apache /etc/httpd/conf.d/vhosts.conf>
+#
+# mail-graph.nausch.org
+#
+<VirtualHost *:80>
+	ServerAdmin webmaster@nausch.org
+	ServerName mail-graph.nausch.org
+	ServerAlias www.mail-graph.nausch.org
+	ServerPath /
+	DocumentRoot "/usr/share/mailgraph"
+	AddHandler cgi-script .cgi
+	<Directory "/usr/share/mailgraph">
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex mailgraph.cgi
+		Order deny,allow
+		Deny from all
+		Allow from 127.0.0.1
+		Allow from 10.0.0.0/24
+		Allow from 10.0.10.0/26
+	</Directory>
+	ErrorLog logs/mail-graph_error.log
+	CustomLog logs/maild-graph_access.log combined
+</VirtualHost>
+</file>
+Anschließend starten wir unseren Webserver einmal durch, damit er den weiteren VHost auch verwenden kann.
+  # service postfix restart
+  httpd beenden:                                             [  OK  ]
+  httpd starten:                                             [  OK  ]
+==== Programmaufruf ====
+=== manueller Start des Dämon ===
+Damit das Mail-Logfile forlaufend ausgelesen wird, starten wir nun noch den Dämon mit Hilfe des mitgelieferten Init-Scriptes //**/etc/rc.d/init.d/mailgraph**//.
+   # service mailgraph start
+   Starting mailgraph:                                        [  OK  ]
+=== automatischer Start des Dämon ===
+Damit beim Systemstart der mailgraph-Dämon richtig gestartet wird, setzen wir die nötigen symlinks automatisch mit:
+  # chkconfig mailgraph on
+Das Ganze überprüfen wir dann noch mittels
+  # chkconfig --list | grep mailgraph
+   mailgraph       0:off   1:off   2:on    3:on    4:on    5:on    6:off
+==== Webaufruf ====
+Über unseren [[https://mailgraph.nausch.org|Vhost]] erhalten wir nun optisch schön ansprechende Übersichten über den Mailverkehr unseres MX.
+{{ :centos:mail_c6:mailgraph.png?direct&500 |Bildschirmhardcopy: mailgraph}}
+===== queuegraph =====
+Möchte man einen graphischen Überblick über die Queues haben, so greifen wir auf das Programm [[http://www.arschkrebs.de/postfix/queuegraph/|Queuegraph]] von [[http://www.arschkrebs.de/|Ralf Hildebrandt]] zurück.
+Das aktuelle Programmpaket **queuegraph** installieren am einfachsten aus dem  [[centos:epel6|Repository epel]].
+==== Installation ====
+Mit Hilfe von **yum** holen wir uns als erstes das benötigte Paket auf unser System.
+   # yum install queuegraph -y
+Den Inhalt des Paketes inspizieren wir bei Bedarf mit folgendem Aufruf.
+   # rpm -qil queuegraph
+<code>Name        : queuegraph                   Relocations: (not relocatable)
+Version     : 1.1                               Vendor: Fedora Project
+Release     : 6.el6                         Build Date: Sat 03 Jul 2010 06:23:17 PM CEST
+Install Date: Sat 23 Feb 2013 07:01:56 PM CET      Build Host: x86-02.phx2.fedoraproject.org
+Group       : System Environment/Daemons    Source RPM: queuegraph-1.1-6.el6.src.rpm
+Size        : 6271                             License: GPL+
+Signature   : RSA/8, Sat 03 Jul 2010 07:05:09 PM CEST, Key ID 3b49df2a0608b895
+Packager    : Fedora Project
+URL         : http://www.arschkrebs.de/postfix/queuegraph/
+Summary     : A RRDtool frontend for Mail statistics
+Description :
+Queuegraph is a very simple mail statistics RRDtool frontend for Postfix that
+produces daily, weekly, monthly and yearly graphs of Postfix's active,
+deferred, incoming and bounce queues.
+/etc/cron.d/queuegraph
+/etc/httpd/conf.d/queuegraph.conf
+/usr/sbin/queuegraph-rrd.sh
+/usr/share/doc/queuegraph-1.1
+/usr/share/doc/queuegraph-1.1/README
+/usr/share/queuegraph
+/usr/share/queuegraph/queuegraph.cgi
+/var/cache/queuegraph
+/var/lib/queuegraph
+</code>
+==== Konfiguration ====
+Die Konfiguration von queuegraph selbst gestaltet sich sehr einfach, da es gar nichts großartrig zu konfigurieren gibt!
+Will man die Sprache bei der Webseite, oder die Farben anpassen, so nimmt man die Änderungen direkt im CGI-Script vor.
+   # vim /usr/share/queuegraph/queuegraph.cgi
+<file perl /usr/share/queuegraph/queuegraph.cgi>#!/usr/bin/perl -w
+# queuegraph -- a postfix queue statistics rrdtool frontend
+# based on mailgraph, which is
+# copyright (c) 2000-2002 David Schweikert <dws@ee.ethz.ch>
+# released under the GNU General Public License
+use RRDs;
+use POSIX qw(uname);
+my $VERSION = "1.1";
+my $host = (POSIX::uname())[1];
+my $scriptname = 'queuegraph.cgi';
+my $xpoints = 800;
+my $points_per_sample = 3;
+my $ypoints = 160;
+my $ypoints_err = 80;
+my $rrd = '/var/lib/queuegraph/mailqueues.rrd'; # path to where the RRD database is
+my $tmp_dir = '/var/cache/queuegraph'; # temporary directory where to store the images
+my $rrdtool_1_0 = ($RRDs::VERSION < 1.199908);
+my @graphs = (
+	{ title => 'Day Graph',   seconds => 3600*24,        },
+	{ title => 'Week Graph',  seconds => 3600*24*7,      },
+	{ title => 'Month Graph', seconds => 3600*24*31,     },
+	{ title => 'Year Graph',  seconds => 3600*24*365, },
+);
+my %color = (
+	sent     => '000099', # rrggbb in hex
+	received => '00FF00',
+	rejected => '999999',
+	bounced  => '993399',
+	virus    => 'FFFF00',
+	spam     => 'FF0000',
+);
+sub graph($$$)
+{
+	my $range = shift;
+	my $file = shift;
+	my $title = shift;
+	my $step = $range*$points_per_sample/$xpoints;
+	my $date = localtime(time);
+	$date =~ s|:|\\:|g unless $rrdtool_1_0;
+	my ($graphret,$xs,$ys) = RRDs::graph($file,
+		'--imgformat', 'PNG',
+		'--width', $xpoints,
+		'--height', $ypoints,
+		'--start', "-$range",
+		'--end', "-".int($range*0.01),
+		'--vertical-label', 'queuefiles',
+		'--title', $title,
+		'--lazy',
+ 		$rrdtool_1_0 ? () : (
+ 			'--slope-mode'
+ 		),
+        	"DEF:active=$rrd:active:AVERAGE",
+        	"DEF:deferred=$rrd:deferred:AVERAGE",
+        	'LINE2:active#00ff00:Active+Incoming+Maildrop\:',
+		'GPRINT:active:MAX:Maximum\: %0.0lf ',
+		'GPRINT:active:AVERAGE:Average\: %0.0lf/min\n',
+        	'LINE1:deferred#0000ff:Deferred\:',
+		'GPRINT:deferred:MAX:Maximum\: %0.0lf ',
+		'GPRINT:deferred:AVERAGE:Average\: %0.0lf/min\l',
+		'HRULE:0#000000',
+        	'COMMENT:\n',
+ 		'COMMENT:['.$date.']\r',
+     );
+	my $ERR=RRDs::error;
+	die "ERROR: $ERR\n" if $ERR;
+}
+sub print_html()
+{
+	print "Content-Type: text/html\n\n";
+	print <<HEADER;
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
+<HTML>
+<HEAD>
+<TITLE>Queue Statistics for $host</TITLE>
+</HEAD>
+<BODY BGCOLOR="#FFFFFF">
+HEADER
+	print "<H1>Postfix Queue Statistics for $host</H1>\n";
+	for my $n (0..$#graphs) {
+		print "<H2>$graphs[$n]{title}</H2>\n";
+		print "<P><IMG BORDER=\"0\" SRC=\"$scriptname/queuegraph_${n}.png\" ALT=\"queuegraph\">\n";
+	}
+	print <<FOOTER;
+<table border="0" width="400"><tr><td align="left">
+<A href="http://www.arschkrebs.de/postfix/queuegraph">queuegraph</A> $VERSION
+by <A href="http://www.arschkrebs.de/">Ralf Hildebrandt</A>,
+based on <A href="http://mailgraph.schweikert.ch/">mailgraph</A>
+by <A href="http://david.schweikert.ch/">David Schweikert</A></td>
+<td ALIGN="right">
+<a HREF="http://oss.oetiker.ch/rrdtool/"><img border="0" src="http://tobi.oetiker.ch/webtools/rrdtool/.pics/rrdtool.gif" alt="rrdtool" width="120" height="34"></a>
+</td></tr></table>
+</BODY>
+FOOTER
+}
+sub send_image($)
+{
+	my $file = shift;
+	-r $file or do {
+		print "Content-Type: text/plain\n\nERROR: can't find $file\n";
+		exit 1;
+	};
+	print "Content-Type: image/png\n";
+	print "Content-Length: ".((stat($file))[7])."\n";
+	print "\n";
+	open(IMG, $file) or die;
+	my $data;
+	print $data while read IMG, $data, 1;
+}
+sub main()
+{
+	if($ENV{PATH_INFO}) {
+		my $uri = $ENV{REQUEST_URI};
+		$uri =~ s/\/[^\/]+$//;
+		$uri =~ s/\//,/g;
+		$uri =~ s/\~/tilde,/g;
+		mkdir "$tmp_dir/$uri", 0777 unless -d "$tmp_dir/$uri";
+		my $file = "$tmp_dir/$uri$ENV{PATH_INFO}";
+		if($ENV{PATH_INFO} =~ /^\/queuegraph_(\d+)\.png$/) {
+			graph($graphs[$1]{seconds}, $file, $graphs[$1]{title});
+		}
+		else {
+			print "Content-Type: text/plain\n\nERROR: unknown image $ENV{PATH_INFO}\n";
+			exit 1;
+		}
+		send_image($file);
+	}
+	else {
+		print_html;
+	}
+}
+main;
+</file>
+==== Apache VHost anlegen ====
+Damit wir bequem von unserem Browser aus, die aktuellen Graphiken abfragen können, legen wir nun einen passenden VHost an.
+  # vim /etc/httpd/conf.d/vhosts.conf
+<file apache /etc/httpd/conf.d/vhosts.conf>
+#
+# queue-graph.nausch.org
+#
+<VirtualHost *:80>
+	ServerAdmin webmaster@nausch.org
+	ServerName queue-graph.nausch.org
+	ServerAlias www.queue-graph.nausch.org
+	ServerPath /
+	DocumentRoot "/usr/share/queuegraph"
+	AddHandler cgi-script .cgi
+	<Directory "/usr/share/queuegraph">
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex queuegraph.cgi
+		Order deny,allow
+		Deny from all
+		Allow from 127.0.0.1
+		Allow from 10.0.0.0/24
+		Allow from 10.0.10.0/26
+	</Directory>
+	ErrorLog logs/queue-graph_error.log
+	CustomLog logs/queue-graph_access.log combined
+</VirtualHost>
+</file>
+Anschließend starten wir unseren Webserver einmal durch, damit er den weiteren VHost auch verwenden kann.
+  # service postfix restart
+  httpd beenden:                                             [  OK  ]
+  httpd starten:                                             [  OK  ]
+Alternativ dazu können wir natürlich auch die mitgelieferte Apache-Datei //**/etc/httpd/conf.d/queuegraph.conf**// verwenden.
+<file http /etc/httpd/conf.d/queuegraph.conf>#
+# Queuegraph: An postfix/sendmail queue analyzer
+#
+Alias /queuegraph    /usr/share/queuegraph
+AddHandler cgi-script .cgi
+<Directory /usr/share/queuegraph/>
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex queuegraph.cgi
+    Order Deny,Allow
+    Deny from all
+    Allow from 127.0.0.1
+</Directory>
+</file>
+==== Programmaufruf ====
+Die automatische Befüllung der **rrd**-files übernimmt ein cronjob, der jede Minute das Script **queuegraph-rrd.sh** startet.
+   # cat /etc/cron.d/queuegraph
+<file bash /etc/cron.d/queuegraph># Runs the queuegraph update program
+#
+# This will run every one minute
+* * * * * root /usr/sbin/queuegraph-rrd.sh &> /dev/null
+</file>
+   # less  /usr/sbin/queuegraph-rrd.sh
+<file bash  /usr/sbin/queuegraph-rrd.sh>#!/bin/sh
+# output the number of messages in the incoming, active, and deferred
+# queues of postfix one per line suitable for use with snmpd/cricket/rrdtool
+#
+# 2003/01/24 Mike Saunders <method at method DOT cx>
+#            mailqsize was originally written by Vivek Khera.  All I did was
+#            make it update an rrd.
+# 2003/04/14 Ralf Hildebrandt <ralf.hildebrandt at charite DOT de>
+#            I bundled this with a modified mailgraph
+# 2007/07/28 Ralf Hildebrandt <ralf.hildebrandt at charite DOT de>
+#            find rrdtool using "which"
+# change this to the location of rrdtool
+RRDTOOL=`which rrdtool`
+# change this to the location you want to store the rrd
+RRDFILE=/var/lib/queuegraph/mailqueues.rrd
+if test ! -x $RRDTOOL ; then
+	echo "ERROR: $RRDTOOL does not exist or is not executable"
+	exit
+fi
+if test ! -f $RRDFILE ; then
+	echo "Creating RRD file $RRDFILE"
+	$RRDTOOL create $RRDFILE --step 60 \
+		DS:active:GAUGE:900:0:U \
+		DS:deferred:GAUGE:900:0:U \
+		RRA:AVERAGE:0.5:1:1440 \
+		RRA:AVERAGE:0.5:30:2016 \
+		RRA:AVERAGE:0.5:60:105120 \
+		RRA:MAX:0.5:1:1440 \
+		RRA:MAX:0.5:30:2016 \
+		RRA:MAX:0.5:60:105120
+fi
+#set -x
+qdir=`/usr/sbin/postconf -h queue_directory`
+active=`find $qdir/incoming $qdir/active $qdir/maildrop -type f -print | wc -l | awk '{print $1}'`
+deferred=`find $qdir/deferred -type f -print | wc -l | awk '{print $1}'`
+#printf "active: %d\ndeferred: %d\n" $active $deferred
+$RRDTOOL update $RRDFILE "N:$active:$deferred"
+</file>
+==== Webaufruf ====
+Über unseren [[https://queuegraph.nausch.org|Vhost]] erhalten wir nun optisch schön ansprechende Übersichten über die Mail-Queues unseres MX.
+{{ :centos:mail_c6:queuegraph.png?direct&500 |Bildschirmhardcopy: queuegraph}}
+===== greygraph =====
+Möchte man einen graphischen Überblick über das Verhalten rund um unseren Greylisting-Daemon **postgrey** haben, dann greifen wir auf das Programm [[http://www.std-soft.com/bfaq/46-k-faq-server/117-greygraph-mail-statistik.html|Greygraph]] von [[http://www.std-soft.com/impressum/42-impressum-webseite/1-markus-neubauer.html|Markus Neubauer]] zurück.
+Das uns hierzu (Stand Februar 2013) noch kein RPM für CentOS 6.x zur Verfügung steht, müssen wir hier ein wenig Hand anlegen.
+==== Download ====
+Als erstes holen wir uns das [[http://www.std-soft.com/images/greygraph_r0.9.4.tar.gz|tar.gz-Archiv]] von der [[http://www.std-soft.com/bfaq/46-k-faq-server/117-greygraph-mail-statistik.html|Projektseite]].
+Hierzu wechseln wir erst einmal in unser lokales Installationsverzeichnis.
+   # cd /usr/local/src/packages
+Dann laden wir uns das Paket herunter.
+   # wget http://www.std-soft.com/images/greygraph_r0.9.4.tar.gz
+==== Installation ====
+Nun entpacken wir das heruntergeladene **tar.gz**-Archiv.
+   # tar xfv greygraph_r0.9.4.tar.gz
+Als Ergebnis haben wir dann folgendes auf die Platte bekommen.
+<code>packages/
+├── etc
+│   ├── default
+│   │   └── greygraph
+│   └── init.d
+│       └── greygraph
+├── README-greygraph
+├── usr
+│   ├── lib
+│   │   └── cgi-bin
+│   │       └── greygraph.cgi
+│   └── sbin
+│       └── greygraph
+└── var
+    ├── cache
+    │   └── greygraph
+    ├── lib
+    │   └── greygraph
+    └── www
+        └── css
+            └── greygraph.css
+</code>
+In der Datei **README-greygraph** finden wir ein paar Informationen, die wir aber auf unserem CentOS-Host weitgehenst ignorieren können.
+   # less README-greygraph
+<code>GREYGRAPH
+postgrey/sqlgrey Monitoring mit Hilfe von rrdtool
+=================================================
+Die Installation auf Debian/Ubuntu erfordert noch folgende Eingabe auf der Befehlszeile:
+mkdir -p /var/cache/greygraph
+# Das Verzeichnis /var/cache/greygraph/ benötigt Schreibrechte für den Webserver
+chgrp www-data /var/cache/greygraph/
+chmod g+w /var/cache/greygraph/
+# Evtl. anpassen der Konfiguration
+vi /etc/default/greygraph
+# evtl anpassen der Pfade im cgi script:
+# vi /usr/lib/cgi-bin/greygraph.cgi
+# starten der Datensammlung
+update-rc.d greygraph defaults
+/etc/init.d/greygraph start
+mkdir -p /var/lib/greygraph
+# das Verzeichnis /var/lib/greygraph dient der Sammlung der rrddaten
+# welche von dem Systemtask in /etc/init.d/greygraph erstellt werden.
+# Jetzt muss nur noch der Browser Aufruf erfolgen mit:
+#
+#	http://your.domain.here/cgi-bin/greygraph.cgi
+#
+Fertig!
+</code>
+Wir werden daher nun als erstes die notwendigen Verzeichnissse anlegen, deren Rechte anpassen, Teile des entpackten Archivs an Ort und Stelle verschieben und die noch fehlenden Konfigurationsdateien hinterschieben.
+  - **Verzeichnisse anlegen und Rechte anpassen**: \\ <code> # mkdir /usr/share/greygraph</code> <code> # mkdir /usr/share/greygraph/</code><code> # chgrp apache /var/cache/greygraph/</code><code> # chmod g+w /var/cache/greygraph/</code>
+  - **vorhandene und nutzbare Dateien kopieren**: \\ <code> # mv /usr/local/src/packages/usr/sbin/greygraph /usr/sbin/ </code> <code> # mv /usr/local/src/packages/usr/lib/cgi-bin/greygraph.cgi /usr/share/greygraph/</code> <code> # mv /usr/local/src/packages/var/www/css/greygraph.css /usr/share/greygraph/</code> <code> # mv /usr/local/src/packages/etc/default/greygraph /etc/sysconfig/</code>
+  - **Dateien anpassen**: \\ <code> # vim /etc/sysconfig/greygraph</code> Hier löschen wir die nicht benötigten Zeilen, do dass hier nur noch die folgenden Zeilen überigbleiben. <file bash /etc/sysconfig/greygraph># Django : 2013-02-23 Anpassungen für Greygraph unter CentOS 6.x
+MAIL_LOG=/var/log/maillog
+IGNORE_LOCALHOST=false
+RRD_DIR=/var/lib/greygraph
+</file>
+  - **Startscript für CentOS anlegen**: \\ Damit der Daemondie relevanten Daten aus dem Maillog in die RRD-Datenbank automatisch schreiben kann, benötigen wir nun noch ein passendes Startscript. Dieses legen wir nun an.<code> # vim /etc/init.d/greygraph</code><file bash /etc/init.d/greygraph>#!/bin/bash
+#
+# Startup script for the greygraph service
+#
+# chkconfig: - 82 28
+# description: greygraph mail log file analyzer
+# processname: greygraph
+# pidfile: /var/run/greygraph.pid
+# config:
+### BEGIN INIT INFO
+# Provides:          greygraph
+# Required-Start:    $local_fs
+# Should-Start:
+# Required-Stop:
+# Default-Stop:      0 1 2 6
+# Short-Description: Start greygraph daemon
+# Description:       Greygraph is a very simple mail statistics RRDtool     \
+#                    frontend for Postfix and Sendmail that produces daily, \
+#                    weekly, monthly and yearly graphs of received/sent and \
+#                    bounced/rejected mail and greylisting statistics.
+### END INIT INFO
+MAILLOG=/var/log/maillog
+PRIORITY=-19
+# Source function library.
+. /etc/rc.d/init.d/functions
+if [ -f /etc/sysconfig/greygraph ]; then
+        . /etc/sysconfig/greygraph
+fi
+# Path to the greygraph script.
+exe=/usr/sbin/greygraph
+prog=greygraph
+RETVAL=0
+start() {
+    echo -n $"Starting $prog: "
+    daemon nice $PRIORITY $exe -l $MAILLOG -d \
+        --daemon-pid=/var/run/greygraph.pid   \
+        --daemon-rrd=/var/lib/greygraph $OPTIONS
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
+    return $RETVAL
+}
+stop() {
+    echo -n $"Stopping $prog: "
+    killproc $exe
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog /var/run/$prog.pid
+}
+reload() {
+    echo -n $"Reloading $prog: "
+    killproc $exe -HUP
+    RETVAL=$?
+    echo
+}
+# See how we were called.
+case "$1" in
+  start)
+    start
+    ;;
+  stop)
+    stop
+    ;;
+  status)
+    status $exe
+    RETVAL=$?
+    ;;
+  restart)
+    stop
+    start
+    RETVAL=$?
+    ;;
+  condrestart)
+    if [ -f /var/run/$prog.pid ] ; then
+        stop
+        start
+        RETVAL=$?
+    fi
+    ;;
+  reload)
+    reload
+	;;
+  *)
+    echo $"Usage: $prog {start|stop|restart|condrestart|reload|status}"
+    RETVAL=3
+esac
+exit $RETVAL
+</file> Anschließend geben wir der Datei noch die e**X**ecutable-Rechte. <code> # chmod +x /etc/init.d/greygraph </code>
+  - **Apache Konfig**: \\ Möchte man später auf die Darstellungsseite nach dem Muster **http://example.com/greygraph** zugreifen, benötigen wir noch eine kleine Konfigurationsdatei. <code> # vim /etc/httpd/conf.d/greygraph.conf</code><file apache /etc/httpd/conf.d/greygraph.conf>#
+# Greygraph: An postfix/sendmail log file analyzer
+#
+Alias /greygraph    /usr/share/greygraph
+AddHandler cgi-script .cgi
+<Directory /usr/share/greygraph/>
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex greygraph.cgi
+    Order Deny,Allow
+    Deny from all
+    Allow from 127.0.0.1
+</Directory>
+</file> Alternativ können wir natürlich dazu einen eigenen Apache-vHOST verwenden. Auf dessen Konfiguration gehen wir gleich ein.
+==== Apache VHost anlegen ====
+Damit wir bequem von unserem Browser aus, die aktuellen Graphiken abfragen können, legen wir nun einen passenden VHost an.
+  # vim /etc/httpd/conf.d/vhosts.conf
+<file apache /etc/httpd/conf.d/vhosts.conf>
+#
+# greygraph.nausch.org
+#
+<VirtualHost *:80>
+	ServerAdmin webmaster@nausch.org
+	ServerName greygraph.nausch.org
+	ServerAlias www.greygraph.nausch.org
+	ServerPath /
+	DocumentRoot "/usr/share/greygraph"
+	AddHandler cgi-script .cgi
+	<Directory "/usr/share/greygraph">
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex greygraph.cgi
+		Order deny,allow
+		Deny from all
+		Allow from 127.0.0.1
+	</Directory>
+	ErrorLog logs/greygraph_error.log
+	CustomLog logs/greygraph_access.log combined
+</VirtualHost>
+</file>
+Anschließend starten wir unseren Webserver einmal durch, damit er den weiteren VHost auch verwenden kann.
+  # service postfix restart
+  httpd beenden:                                             [  OK  ]
+  httpd starten:                                             [  OK  ]
+==== Programmaufruf ====
+=== manueller Start des Dämon ===
+Damit das Mail-Logfile forlaufend ausgelesen wird, starten wir nun noch den Dämon mit Hilfe des mitgelieferten Init-Scriptes //**/etc/rc.d/init.d/greygraph**//.
+   # service mailgraph start
+   Starting greygraph:                                        [  OK  ]
+=== automatischer Start des Dämon ===
+Damit beim Systemstart der mailgraph-Dämon richtig gestartet wird, setzen wir die nötigen symlinks automatisch mit:
+  # chkconfig greygraph on
+Das Ganze überprüfen wir dann noch mittels
+  # chkconfig --list | grep greygraph
+   greygraph       0:off   1:off   2:on    3:on    4:on    5:on    6:off
+==== Webaufruf ====
+Über unseren [[https://greygraph.nausch.org|Vhost]] erhalten wir nun optisch schön ansprechende Übersichten über den Mailverkehr unseres MX.
+{{ :centos:mail_c6:greygraph.png?direct&500 |Bildschirmhardcopy: greygraph}}
+===== mxgraphs =====
+Im Gegensatz zu den drei vorgenannten graphischen Darstellungen, ist **mxgraphs** nichts besonderes neues, da es sich bei **mxgraphs** lediglich um eine Zusammenführungen der drei einzel dargestellten WEB-Seiten auf einer Übersichtsseite handelt.
+==== Installation ====
+Die Installation gestaltet sich nicht sonderlich schwer, da wir auf die drei vorgenannten Programme [[centos:mail_c6:mta_11#mailgraph|mailgraph]], [[centos:mail_c6:mta_11#queuegraph|queuegraph]] und [[centos:mail_c6:mta_11#greygraph|greygraph]] zurückgreifen.
+Wir werden nun als erstes die notwendigen Verzeichnisse anlegen, deren Rechte anpassen und die benötigen Dateien dort ablegen.
+  - **Verzeichnisse anlegen und Rechte anpassen**: \\ <code> # mkdir /usr/share/mxgraphs</code> <code> # mkdir /usr/share/mxgraphs/</code><code> # chgrp apache /var/cache/mxgraphs/</code><code> # chmod g+w /var/cache/mxgraphs/</code>
+  - **Konfigirationsdateien anlegen**: \\ Als erstes legen wir die benötigte **CSS**-Datei an. <code> # vim /usr/share/mxgraphs/mxgraphs.css</code> <file css /usr/share/mxgraphs/mxgraphs.css>*     { margin: 0; padding: 0 }
+body  { width: 900px; background-color: white;
+	font-family: sans-serif;
+	font-size: 12pt;
+	margin: 5px }
+h1    { margin-top: 20px; margin-bottom: 30px;
+        text-align: center }
+h2    { background-color: #ddd;
+	padding: 2px 0 2px 4px }
+hr    { height: 1px;
+	border: 0;
+	border-top: 1px solid #aaa }
+table { border: 0px; width: 100% }
+img   { border: 0 }
+a     { text-decoration: none; color: #00e }
+a:hover  { text-decoration: underline; }
+#jump    { margin: 0 0 10px 4px }
+#jump li { list-style: none; display: inline;
+           font-size: 90%; }
+#jump li:after            { content: "|"; }
+#jump li:last-child:after { content: ""; }
+</file> Die **CGI**-Datei, die uns die gewünschten Graphen übersichtlich auf einer Seite darstellen soll, legen wir nun im nächsten Schritt an. <code> # vim /usr/share/mxgraphs/mxgraphs.cgi</code><file bash /usr/share/mxgraphs/mxgraphs.cgi>#!/usr/bin/perl -w
+# mxgraphs -- detailed postfix mail traffic statistics
+# copyright (c) 2000-2007 ETH Zurich
+# copyright (c) 2000-2007 David Schweikert <david@schweikert.ch>
+# modifed 2011 for grey Markus Neubauer <neubauer@std-service.com>
+# modified 2013 for mxgraphs by Django <django@it-ignorant.de>
+# released under the GNU General Public License
+use RRDs;
+use POSIX qw(uname);
+my $VERSION = "0.02";
+my $host = (POSIX::uname())[1];
+my $scriptname = 'mxgraphs.cgi';
+my $xpoints = 800;
+my $points_per_sample = 3;
+my $ypoints = 160;
+my $ypoints_err = 160;
+my $ypoints_grey = 160;
+my $ypoints_greydetail = 160;
+my $ypoints_queue = 160;
+my $rrd = '/var/lib/mailgraph/mailgraph.rrd';                     	# path to where the Mailgraph RRD database is
+my $rrd_virus = '/var/lib/mailgraph/mailgraph_virus.rrd';   		# path to where the Virus     RRD database is
+my $rrd_queue = '/var/lib/queuegraph/mailqueues.rrd';           	# path to where the Mailqueue RRD database is
+my $rrd_grey = '/var/lib/greygraph/greygraph.rrd';              	# path to where the Greygraph RRD database is
+my $rrd_spam = '/var/lib/greygraph/greygraph_spam.rrd';         	# path to where the Spam      RRD database is
+my $tmp_dir = '/var/cache/mxgraphs';                            	# temporary directory where to store the images
+my @graphs = (
+	{ title => 'Letzten 24 Stunden', seconds => 3600*24,     },
+	{ title => 'Letzten 7 Tage',     seconds => 3600*24*7,   },
+	{ title => 'Letzten 31 Tage',    seconds => 3600*24*31,  },
+	{ title => 'Letzten 12 Monate',  seconds => 3600*24*365, },
+);
+my %color = (
+	sent        => '000099',                                      	# rrggbb in hex
+	received    => '009900',
+	whitelist   => '999999',
+	new         => 'C1C1C1',
+	early       => 'AA0000',
+	qspam       => '000000',
+	awl         => 'DDBB00',
+	reconnectok => '88FF00',
+	rejected    => 'AA0000',
+	bounced     => '000000',
+	virus       => 'DDBB00',
+	spam        => '999999',
+	active      => 'EFEF00',
+	deferred    => 'DD8800',
+);
+sub rrd_graph(@)
+	{
+	my ($range, $file, $ypoints, @rrdargs) = @_;
+	my $step = $range*$points_per_sample/$xpoints;
+	my $end  = time; $end -= $end % $step;
+	my $date = localtime(time);
+	$date =~ s|:|\\:|g unless $RRDs::VERSION < 1.199908;
+	my ($graphret,$xs,$ys) = RRDs::graph($file,
+		'--imgformat', 'PNG',
+		'--width', $xpoints,
+		'--height', $ypoints,
+		'--start', "-$range",
+		'--end', $end,
+		'--vertical-label', 'msgs/min',
+		'--lower-limit', 0,
+		'--units-exponent', 0, 					# don't show milli-messages/s
+		'--lazy',
+		'--color', 'SHADEA#ffffff',
+		'--color', 'SHADEB#ffffff',
+		'--color', 'BACK#ffffff',
+		$RRDs::VERSION < 1.2002 ? () : ( '--slope-mode'),
+		@rrdargs,
+		'COMMENT:['.$date.']\r',
+	);
+	my $ERR=RRDs::error;
+	die "ERROR: $ERR\n" if $ERR;
+}
+sub graph($$)
+	{
+	my ($range, $file) = @_;
+	my $step = $range*$points_per_sample/$xpoints;
+	rrd_graph($range, $file, $ypoints,
+		"DEF:sent=$rrd:sent:AVERAGE",
+		"DEF:msent=$rrd:sent:MAX",
+		"CDEF:rsent=sent,60,*",
+		"CDEF:rmsent=msent,60,*",
+		"CDEF:dsent=sent,UN,0,sent,IF,$step,*",
+		"CDEF:ssent=PREV,UN,dsent,PREV,IF,dsent,+",
+		"AREA:rsent#$color{sent}:Sent                    ",
+		'GPRINT:ssent:MAX:total\: %15.0lf msgs',
+		'GPRINT:rsent:AVERAGE:avg\: %12.2lf msgs/min',
+		'GPRINT:rmsent:MAX:max\: %11.0lf msgs/min\l',
+		"DEF:recv=$rrd:recv:AVERAGE",
+		"DEF:mrecv=$rrd:recv:MAX",
+		"CDEF:rrecv=recv,60,*",
+		"CDEF:rmrecv=mrecv,60,*",
+		"CDEF:drecv=recv,UN,0,recv,IF,$step,*",
+		"CDEF:srecv=PREV,UN,drecv,PREV,IF,drecv,+",
+		"LINE2:rrecv#$color{received}:Received                ",
+		'GPRINT:srecv:MAX:total\: %15.0lf msgs',
+		'GPRINT:rrecv:AVERAGE:avg\: %12.2lf msgs/min',
+		'GPRINT:rmrecv:MAX:max\: %11.0lf msgs/min\l',
+	);
+}
+sub graph_err($$)
+	{
+	my ($range, $file) = @_;
+	my $step = $range*$points_per_sample/$xpoints;
+	rrd_graph($range, $file, $ypoints_err,
+		"DEF:bounced=$rrd:bounced:AVERAGE",
+		"DEF:mbounced=$rrd:bounced:MAX",
+		"CDEF:rbounced=bounced,60,*",
+		"CDEF:dbounced=bounced,UN,0,bounced,IF,$step,*",
+		"CDEF:sbounced=PREV,UN,dbounced,PREV,IF,dbounced,+",
+		"CDEF:rmbounced=mbounced,60,*",
+		"AREA:rbounced#$color{bounced}:Bounced                 ",
+		'GPRINT:sbounced:MAX:total\: %15.0lf msgs',
+		'GPRINT:rbounced:AVERAGE:avg\: %12.2lf msgs/min',
+		'GPRINT:rmbounced:MAX:max\: %11.0lf msgs/min\l',
+		"DEF:virus=$rrd_virus:virus:AVERAGE",
+		"DEF:mvirus=$rrd_virus:virus:MAX",
+		"CDEF:rvirus=virus,60,*",
+		"CDEF:dvirus=virus,UN,0,virus,IF,$step,*",
+		"CDEF:svirus=PREV,UN,dvirus,PREV,IF,dvirus,+",
+		"CDEF:rmvirus=mvirus,60,*",
+		"STACK:rvirus#$color{virus}:Viruses                 ",
+		'GPRINT:svirus:MAX:total\: %15.0lf msgs',
+		'GPRINT:rvirus:AVERAGE:avg\: %12.2lf msgs/min',
+		'GPRINT:rmvirus:MAX:max\: %11.0lf msgs/min\l',
+		"DEF:spam=$rrd_virus:spam:AVERAGE",
+		"DEF:mspam=$rrd_virus:spam:MAX",
+		"CDEF:rspam=spam,60,*",
+		"CDEF:dspam=spam,UN,0,spam,IF,$step,*",
+		"CDEF:sspam=PREV,UN,dspam,PREV,IF,dspam,+",
+		"CDEF:rmspam=mspam,60,*",
+		"STACK:rspam#$color{spam}:Spam                    ",
+		'GPRINT:sspam:MAX:total\: %15.0lf msgs',
+		'GPRINT:rspam:AVERAGE:avg\: %12.2lf msgs/min',
+		'GPRINT:rmspam:MAX:max\: %11.0lf msgs/min\l',
+		"DEF:rejected=$rrd:rejected:AVERAGE",
+		"DEF:mrejected=$rrd:rejected:MAX",
+		"CDEF:rrejected=rejected,60,*",
+		"CDEF:drejected=rejected,UN,0,rejected,IF,$step,*",
+		"CDEF:srejected=PREV,UN,drejected,PREV,IF,drejected,+",
+		"CDEF:rmrejected=mrejected,60,*",
+		"LINE2:rrejected#$color{rejected}:Rejected                ",
+		'GPRINT:srejected:MAX:total\: %15.0lf msgs',
+		'GPRINT:rrejected:AVERAGE:avg\: %12.2lf msgs/min',
+		'GPRINT:rmrejected:MAX:max\: %11.0lf msgs/min\l',
+	);
+}
+sub graph_queue($$)
+	{
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_queue,
+                "DEF:deferred=$rrd_queue:deferred:AVERAGE",
+                "AREA:deferred#$color{deferred}:Deferred                ",
+                'GPRINT:deferred:MAX:total\: %15.0lf msgs',
+                'GPRINT:deferred:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:deferred:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:active=$rrd_queue:active:AVERAGE",
+                "LINE2:active#$color{active}:Active+Incoming+Maildrop",
+                'GPRINT:active:MAX:total\: %15.0lf msgs',
+                'GPRINT:active:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:active:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub graph_grey($$)
+	{
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_grey,
+                "DEF:new=$rrd_grey:new:AVERAGE",
+                "DEF:mnew=$rrd_grey:new:MAX",
+                "CDEF:rnew=new,60,*",
+                "CDEF:rmnew=mnew,60,*",
+                "CDEF:dnew=new,UN,0,new,IF,$step,*",
+                "CDEF:snew=PREV,UN,dnew,PREV,IF,dnew,+",
+                "LINE2:rnew#$color{new}:New                     ",
+                'GPRINT:snew:MAX:total\: %15.0lf msgs',
+                'GPRINT:rnew:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmnew:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:reconnectok=$rrd_spam:reconnectok:AVERAGE",
+                "DEF:mreconnectok=$rrd_spam:reconnectok:MAX",
+                "CDEF:rreconnectok=reconnectok,60,*",
+                "CDEF:dreconnectok=reconnectok,UN,0,reconnectok,IF,$step,*",
+                "CDEF:sreconnectok=PREV,UN,dreconnectok,PREV,IF,dreconnectok,+",
+                "CDEF:rmreconnectok=mreconnectok,60,*",
+                "LINE2:rreconnectok#$color{reconnectok}:Reconnect O.K.          ",
+                'GPRINT:sreconnectok:MAX:total\: %15.0lf msgs',
+                'GPRINT:rreconnectok:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmreconnectok:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub graph_greydetail($$)
+{
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_greydetail,
+                "DEF:whitelist=$rrd_grey:whitelist:AVERAGE",
+                "DEF:mwhitelist=$rrd_grey:whitelist:MAX",
+                "CDEF:rwhitelist=whitelist,60,*",
+                "CDEF:rmwhitelist=mwhitelist,60,*",
+                "CDEF:dwhitelist=whitelist,UN,0,whitelist,IF,$step,*",
+                "CDEF:swhitelist=PREV,UN,dwhitelist,PREV,IF,dwhitelist,+",
+                "LINE2:rwhitelist#$color{whitelist}:Whitelist               ",
+                'GPRINT:swhitelist:MAX:total\: %15.0lf msgs',
+                'GPRINT:rwhitelist:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmwhitelist:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:awl=$rrd_grey:awl:AVERAGE",
+                "DEF:mawl=$rrd_grey:awl:MAX",
+                "CDEF:rawl=awl,60,*",
+                "CDEF:dawl=awl,UN,0,awl,IF,$step,*",
+                "CDEF:sawl=PREV,UN,dawl,PREV,IF,dawl,+",
+                "CDEF:rmawl=mawl,60,*",
+                "LINE2:rawl#$color{awl}:Auto whitelist          ",
+                'GPRINT:sawl:MAX:total\: %15.0lf msgs',
+                'GPRINT:rawl:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmawl:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:spam=$rrd_spam:spam:AVERAGE",
+                "DEF:mspam=$rrd_spam:spam:MAX",
+                "CDEF:rspam=spam,60,*",
+                "CDEF:dspam=spam,UN,0,spam,IF,$step,*",
+                "CDEF:sspam=PREV,UN,dspam,PREV,IF,dspam,+",
+                "CDEF:rmspam=mspam,60,*",
+                "LINE2:rspam#$color{qspam}:Spam                    ",
+                'GPRINT:sspam:MAX:total\: %15.0lf msgs',
+                'GPRINT:rspam:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmspam:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:early=$rrd_grey:early:AVERAGE",
+                "DEF:mearly=$rrd_grey:early:MAX",
+                "CDEF:rearly=early,60,*",
+                "CDEF:dearly=early,UN,0,early,IF,$step,*",
+                "CDEF:searly=PREV,UN,dearly,PREV,IF,dearly,+",
+                "CDEF:rmearly=mearly,60,*",
+                "STACK:rearly#$color{early}:Early connect           ",
+                'GPRINT:searly:MAX:total\: %15.0lf msgs',
+                'GPRINT:rearly:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmearly:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub print_html()
+{
+	print "Content-Type: text/html\n\n";
+	print <<HEADER;
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html>
+ <head>
+  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
+  <title>Mailserver Statistiken auf $host</title>
+  <meta http-equiv="Refresh" content="300" />
+  <meta http-equiv="Pragma" content="no-cache" />
+  <link rel="stylesheet" href="mxgraphs.css" type="text/css" />
+ </head>
+ <body>
+HEADER
+	print "<h1>Mailserver Statistiken f&uuml;r<br>$host</h1>\n";
+	print "<ul id=\"jump\">\n";
+	for my $n (0..$#graphs) {
+		print "  <li><a href=\"#G$n\">$graphs[$n]{title}</a>&nbsp;</li>\n";
+	}
+	print "</ul>\n";
+	for my $n (0..$#graphs) {
+		print "<h2 id=\"G$n\">$graphs[$n]{title}</h2>\n";
+		print "<p><img src=\"$scriptname?${n}-n\" alt=\"mxgraphs - received and sent\"/></p>\n";
+		print "<p><img src=\"$scriptname?${n}-e\" alt=\"mxgraphs - blocked\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-g\" alt=\"mxgraphs - greylisted\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-d\" alt=\"mxgraphs - greylisted (detailed)\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-q\" alt=\"mxgraphs - mailqueues\"/></p>\n";
+	}
+	print <<FOOTER;
+ <hr/>
+  <table border="0" style="font-size:12px" width="900">
+   <colgroup>
+    <col width="200">
+    <col width="425">
+    <col width="123">
+   </colgroup>
+   <tr class="row0">
+    <td class="col0 leftalign">
+     <a href="http://dokuwiki.nausch.org/doku.php/centos:mail_c6:mta_11#mxgraphs">MX-Graphs </a>$VERSION by
+     <a href="mailto:django@it-ignorant.org?subject=MX-Graphs%20for%20my%20Mailserver">Django</a> based on
+    </td>
+    <td>
+     <a href="http://david.schweikert.ch/">David Schweikert's</a> <a href="http://mailgraph.schweikert.ch/">Mailgraph</a>,
+    </td>
+    <td class="col2 rightalign" rowspan="3">
+     <a href="http://oss.oetiker.ch/rrdtool/"><img src="rrdtool-3dlogo.png" alt="" width="135" height="50" align="right" align="middle"/></a>
+    </td>
+   </tr>
+   <tr class="row1">
+    <td class="col0 leftalign">
+    </td>
+    <td class="col1 leftalign">
+     <a href="http://www.gichenbacher.de/kontakt">Markus Neubauer's </a>
+     <a href="http://www.std-soft.com/bfaq/46-k-faq-server/117-greygraph-mail-statistik.html">Greygraph</a> and
+    </td>
+   </tr>
+   <tr class="row2">
+    <td class="col0 leftalign">
+    </td>
+    <td class="col1 leftalign">
+     <a href="http://www.arschkrebs.de/">Ralf Hildebrandt's </a><a href="http://www.arschkrebs.de/postfix/queuegraph">Queuegraph</a>.
+    </td>
+   </tr>
+  </table>
+ </body>
+</html>
+FOOTER
+}
+sub send_image($)
+{
+	my ($file)= @_;
+	-r $file or do {
+		print "Content-type: text/plain\n\nERROR: can't find $file\n";
+		exit 1;
+	};
+	print "Content-type: image/png\n";
+	print "Content-length: ".((stat($file))[7])."\n";
+	print "\n";
+	open(IMG, $file) or die;
+	my $data;
+	print $data while read(IMG, $data, 16384)>0;
+}
+sub main()
+{
+	my $uri = $ENV{REQUEST_URI} || '';
+	$uri =~ s/\/[^\/]+$//;
+	$uri =~ s/\//,/g;
+	$uri =~ s/(\~|\%7E)/tilde,/g;
+	mkdir $tmp_dir, 0777 unless -d $tmp_dir;
+	mkdir "$tmp_dir/$uri", 0777 unless -d "$tmp_dir/$uri";
+	my $img = $ENV{QUERY_STRING};
+	if(defined $img and $img =~ /\S/) {
+		if($img =~ /^(\d+)-n$/) {
+			my $file = "$tmp_dir/$uri/mxgraph_$1.png";
+			graph($graphs[$1]{seconds}, $file);
+			send_image($file);
+		}
+		elsif($img =~ /^(\d+)-e$/) {
+			my $file = "$tmp_dir/$uri/mxgraph_$1_err.png";
+			graph_err($graphs[$1]{seconds}, $file);
+			send_image($file);
+		}
+                elsif($img =~ /^(\d+)-g$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_grey.png";
+                        graph_grey($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                elsif($img =~ /^(\d+)-d$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_greydetail.png";
+                        graph_greydetail($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                elsif($img =~ /^(\d+)-q$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_queue.png";
+                        graph_queue($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+		else {
+			die "ERROR: invalid argument\n";
+		}
+	}
+	else {
+		print_html;
+	}
+}
+main;
+</file> Anschließend geben wir der Datei noch die e**X**ecutable-Rechte. <code> # chmod +x /usr/share/mxgraphs/mxgraphs.cgi</code>
+  - **Apache Konfig**: \\ Möchte man später auf die Darstellungsseite nach dem Muster **http://example.com/mxgraphs** zugreifen, benötigen wir noch eine kleine Konfigurationsdatei. <code> # vim /etc/httpd/conf.d/mxgraphs.conf</code><file apache /etc/httpd/conf.d/mxgraphs.conf>#
+# MX-Graph: An postfix/sendmail log file analyzer
+#
+Alias /mxgraphs    /usr/share/mxgraphs
+AddHandler cgi-script .cgi
+<Directory /usr/share/mxgraphs/>
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex mxgraphs.cgi
+    Order Deny,Allow
+    Deny from all
+    Allow from 127.0.0.1
+</Directory>
+</file> Alternativ können wir natürlich dazu einen eigenen Apache-vHOST verwenden. Auf dessen Konfiguration gehen wir gleich ein.
+==== Apache VHost anlegen ====
+Damit wir bequem von unserem Browser aus, die aktuellen Graphiken abfragen können, legen wir nun einen passenden VHost an.
+  # vim /etc/httpd/conf.d/vhosts.conf
+<file apache /etc/httpd/conf.d/vhosts.conf>#
+# mxgraphs.nausch.org
+#
+<VirtualHost *:80>
+	ServerAdmin webmaster@nausch.org
+	ServerName mxgraphs.nausch.org
+	ServerAlias www.mxgraphs.nausch.org
+	ServerPath /
+	DocumentRoot "/usr/share/mxgraphs"
+	AddHandler cgi-script .cgi
+	<Directory "/usr/share/mxgraphs">
+    AllowOverride None
+    Options +ExecCGI
+    DirectoryIndex mxgraphs.cgi
+		Order deny,allow
+		Deny from all
+		Allow from 127.0.0.1
+	</Directory>
+	ErrorLog logs/mxgraphs_error.log
+	CustomLog logs/mxgraphs_access.log combined
+</VirtualHost>
+</file>
+Anschließend starten wir unseren Webserver einmal durch, damit er den weiteren VHost auch verwenden kann.
+  # service postfix restart
+  httpd beenden:                                             [  OK  ]
+  httpd starten:                                             [  OK  ]
+==== Webaufruf ====
+Über unseren [[https://mxgraphs.nausch.org|Vhost]] erhalten wir nun optisch schön ansprechende Übersichten über den Mailverkehr unseres MX.
+{{ :centos:mail_c6:mxgraphs.png?direct&600 |Bildschirmhardcopy: mxgraphs}}
+Eine aktuelle LIVE-Übersicht einer MXGraph-Seite findet man z.B. [[https://mailgraph.piratenpartei-bayern.de/|hier]].
+===== mxgraphs und DMARC & Co =====
+Hat man bei seinem Mailserver [[centos:mail_c6:mta_13|DMARC]] im Einsatz, möchte man in aller Regel auch eine graphisch aufbereitete Übersicht über die **Milter**((**M**ailf**ilter**)) [[centos:mail_c6:mta_10#spf-bewertung_bei_der_mailannahme|SMF-SPF]], [[centos:mail_c6:mta_9#installation_von_opendkim|OpenDKIM]] und [[centos:mail_c6:mta_13|OpenDMARC]] haben. Angelehnt auf den [[https://www.kernel-error.de/postfix/mailgraph-aufgebohrt|Mailgraph Patch]] von [[kernel-error@kernel-error.com|Sebastian van de Meer]] erweitern wir nun unsere [[centos:mail_c6:mta_11?&#mxgraphs|mxgraphs-Installation]].
+==== Installation ====
+Für die Einbindung der Übersichtsgraphiken für SPF, DKIM und DMARC benötigen wir das Paket **mailgraph**, dass wir aus dem [[centos:epel6|EPEL-Repository]] bereits installiert haben. Eine ausführliche Installationsanleitung hierzu findet sich [[centos:mail_c6:mta_11?&#mailgraph|hier]].
+<WRAP round important>**WICHTIG**:
+Durch die Erweiterung, oder besser gesagt die Änderung des Daemons, wir eine neue RRD-Datei //**/var/lib/mailgraph/mailgraph.rrd**// angelegt.
+\\
+\\
+Das hat zur Folge, dass ggf. vorhandenen Statistikdaten der **Letzten 31 Tage** und **Letzten 12 Monate** verloren gehen und die Daten vom Start des geänderten Daemon neu angelegt und angezeigt werden!
+</WRAP>
+Bevor wir jedoch die Änderungen an unserer Konfiguration durchführen, stoppen wir den ev. bereits laufenden Daemon **mailgraph**.
+   # service mailgraph stop
+   Stopping mailgraph:                                        [  OK  ]
+==== Patchen von mailgraph ====
+Zum Anlegen der Statistikdaten müssen wir nun das Perl-Script aus dem Paket **mailgraph** erweitern. Hierzu verwenden wir den folgenden Patch **mailgraph-1.14-8_mxgraphs_patch**.
+<file perl mailgraph-1.14-8_mxgraphs_patch>-- mailgraph.orig      2007-08-29 11:06:01.000000000 +0200
++++ mailgraph   2014-05-13 19:18:24.892999883 +0200
+@@ -4,6 +4,7 @@
+ # copyright (c) 2000-2007 ETH Zurich
+ # copyright (c) 2000-2007 David Schweikert <david@schweikert.ch>
+ # released under the GNU General Public License
++# with dkim-, dmarc, spf-patch Sebastian van de Meer <kernel-error@kernel-error.de>
+ ######## Parse::Syslog 1.09 (automatically embedded) ########
+ package Parse::Syslog;
+@@ -381,7 +382,7 @@
+ my $rrd_virus = "mailgraph_virus.rrd";
+ my $year;
+ my $this_minute;
+-my %sum = ( sent => 0, received => 0, bounced => 0, rejected => 0, virus => 0, spam => 0 );
++my %sum = ( sent => 0, received => 0, bounced => 0, rejected => 0, spfnone => 0, spffail => 0, spfpass => 0, dmarcnone => 0, dmarcfail => 0, dmarcpass => 0, dkimnone => 0, dkimfail => 0, dkimpass => 0, virus => 0, spam => 0, greylisted => 0, delayed => 0);
+ my $rrd_inited=0;
+ my %opt = ();
+@@ -395,6 +396,15 @@
+ sub event_rejected($);
+ sub event_virus($);
+ sub event_spam($);
++sub event_spfnone($);
++sub event_spffail($);
++sub event_spfpass($);
++sub event_dmarcnone($);
++sub event_dmarcfail($);
++sub event_dmarcpass($);
++sub event_dkimnone($);
++sub event_dkimfail($);
++sub event_dkimpass($);
+ sub init_rrd($);
+ sub update($);
+@@ -528,6 +538,15 @@
+                                'DS:recv:ABSOLUTE:'.($rrdstep*2).':0:U',
+                                'DS:bounced:ABSOLUTE:'.($rrdstep*2).':0:U',
+                                'DS:rejected:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:spfnone:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:spffail:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:spfpass:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:dmarcnone:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:dmarcfail:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:dmarcpass:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:dkimnone:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:dkimfail:ABSOLUTE:'.($rrdstep*2).':0:U',
++                               'DS:dkimpass:ABSOLUTE:'.($rrdstep*2).':0:U',
+                                "RRA:AVERAGE:0.5:$day_steps:$realrows",   # day
+                                "RRA:AVERAGE:0.5:$week_steps:$realrows",  # week
+                                "RRA:AVERAGE:0.5:$month_steps:$realrows", # month
+@@ -853,6 +872,45 @@
+                        event($time, 'virus');
+                }
+        }
++        elsif ($prog eq 'smf-spf') {
++                if ($text =~ /SPF pass:/) {
++                        event($time, 'spfpass');
++                }
++                elsif($text =~ /SPF none:/) {
++                        event($time, 'spfnone');
++                }
++               elsif($text =~ /fail:/) {
++                       event($time, 'spffail');
++               }
++#                elsif($text =~ /SPF fail:\b/) {
++#                        event($time, 'spffail');
++#                }
++#                elsif($text =~ /SPF softfail:\b/) {
++#                        event($time, 'spffail');
++#                }
++        }
++        elsif ($prog eq 'opendkim') {
++                if ($text =~ /DKIM verification successful/) {
++                        event($time, 'dkimpass');
++                }
++                elsif($text =~ /no signature data/) {
++                        event($time, 'dkimnone');
++                }
++                elsif($text =~ /bad signature data/) {
++                        event($time, 'dkimfail');
++                }
++        }
++        elsif ($prog eq 'opendmarc') {
++                if ($text =~ /pass/) {
++                        event($time, 'dmarcpass');
++                }
++                elsif($text =~ /none/) {
++                        event($time, 'dmarcnone');
++                }
++                elsif($text =~ /fail/) {
++                        event($time, 'dmarcfail');
++                }
++        }
+ }
+ sub event($$)
+@@ -870,13 +928,17 @@
+        return 1 if $m == $this_minute;
+        return 0 if $m < $this_minute;
+-       print "update $this_minute:$sum{sent}:$sum{received}:$sum{bounced}:$sum{rejected}:$sum{virus}:$sum{spam}\n" if $opt{verbose};
+-       RRDs::update $rrd, "$this_minute:$sum{sent}:$sum{received}:$sum{bounced}:$sum{rejected}" unless $opt{'only-virus-rrd'};
++#      print "update $this_minute:$sum{sent}:$sum{received}:$sum{bounced}:$sum{rejected}:$sum{virus}:$sum{spam}\n" if $opt{verbose};
++       print "update $this_minute:$sum{sent}:$sum{received}:$sum{bounced}:$sum{rejected}:$sum{spfnone}:$sum{spffail}:$sum{spfpass}:$sum{dmarcnone}:$sum{dmarcfail}:$sum{dmarcpass}:$sum{dkimnone}:$sum{dkimfail}:$sum{dkimpass}:$sum{virus}:$sum{spam}\n" if $opt{verbose};
++#      RRDs::update $rrd, "$this_minute:$sum{sent}:$sum{received}:$sum{bounced}:$sum{rejected}" unless $opt{'only-virus-rrd'};
++       RRDs::update $rrd, "$this_minute:$sum{sent}:$sum{received}:$sum{bounced}:$sum{rejected}:$sum{spfnone}:$sum{spffail}:$sum{spfpass}:$sum{dmarcnone}:$sum{dmarcfail}:$sum{dmarcpass}:$sum{dkimnone}:$sum{dkimfail}:$sum{dkimpass}" unless $opt{'no-mail-rrd'};
+        RRDs::update $rrd_virus, "$this_minute:$sum{virus}:$sum{spam}" unless $opt{'only-mail-rrd'};
+        if($m > $this_minute+$rrdstep) {
+                for(my $sm=$this_minute+$rrdstep;$sm<$m;$sm+=$rrdstep) {
+-                       print "update $sm:0:0:0:0:0:0 (SKIP)\n" if $opt{verbose};
+-                       RRDs::update $rrd, "$sm:0:0:0:0" unless $opt{'only-virus-rrd'};
++#                      print "update $sm:0:0:0:0:0:0 (SKIP)\n" if $opt{verbose};
++                       print "update $sm:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 (SKIP)\n" if $opt{verbose};
++#                      RRDs::update $rrd, "$sm:0:0:0:0" unless $opt{'only-virus-rrd'};
++                       RRDs::update $rrd, "$sm:0:0:0:0:0:0:0:0:0:0:0:0:0" unless $opt{'only-virus-rrd'};
+                        RRDs::update $rrd_virus, "$sm:0:0" unless $opt{'only-mail-rrd'};
+                }
+        }
+@@ -885,6 +947,15 @@
+        $sum{received}=0;
+        $sum{bounced}=0;
+        $sum{rejected}=0;
++       $sum{spfnone}=0;
++       $sum{spffail}=0;
++       $sum{spfpass}=0;
++       $sum{dmarcnone}=0;
++       $sum{dmarcfail}=0;
++       $sum{dmarcpass}=0;
++       $sum{dkimnone}=0;
++       $sum{dkimfail}=0;
++       $sum{dkimpass}=0;
+        $sum{virus}=0;
+        $sum{spam}=0;
+        return 1;
+</file>
+Zunächst kopieren wir die vorhandene Datei **mailgraph** nach //**/tmp**//, um sie dort zu patchen.
+   # cp /usr/sbin/mailgraph /tmp
+Dann wechseln wir in das Zielverzeichnis.
+   # cd /tmp
+Und laden uns den oben aufgeführten Patch zum Ändern der vorhandenen Datei auf unseren Rechner.
+Anschließend wenden wir den Patch mit nachfolgendem Aufruf an.
+   # patch -p0 < mailgraph-1.14-8_mxgraphs_patch
+   patching file mailgraph
+Zu guter letzt kopieren wir nun noch das geänderte perl-Script zurück an Ort und Stelle.
+   # mv mailgraph /usr/sbin/ -f
+Nun können wir den Daemon **mailgraph** wieder starten.
+   # service mailgraph start
+Starting mailgraph:                                        [  OK  ]
+==== Patchen von mxgraphs.cgi ====
+Damit die zusätzlichen Statistikdaten für die drei Milter **SPF**, **DKIM** und **DMARC** graphisch aufbereitet werden können, müssen wir unser vorhandenes //**cgi-Script**// **mxgraphs.cgi** aus der bereits [[centos:mail_c6:mta_11?&#mxgraphs|erfolgreichen Installation]] von **mxgraphs** austauschen.
+Zum Anlegen der Statistikdaten müssen wir nun das Perl-Script aus dem Paket **mailgraph** erweitern.
+Hierzu verwenden wir den folgenden Patch **mxgraphs_spf_dkim_dmarc.patch**.
+<file perl mxgraphs_spf_dkim_dmarc.patch>--- mxgraphs.cgi        2014-05-15 15:48:24.628000137 +0200
++++ mxgraphs.cgi   2014-05-15 15:31:10.293000217 +0200
+@@ -5,12 +5,14 @@
+ # copyright (c) 2000-2007 David Schweikert <david@schweikert.ch>
+ # modifed 2011 for grey Markus Neubauer <neubauer@std-service.com>
+ # modified 2013 for mxgraphs by Django <django@it-ignorant.de>
++# modified 2014 for mxgraphs (v2) by Django <django@it-ignorant.de> based on
++# patches from  Sebastian van de Meer <kernel-error@kernel-error.de>
+ # released under the GNU General Public License
+ use RRDs;
+ use POSIX qw(uname);
+-my $VERSION = "0.02";
++my $VERSION = "0.03";
+ my $host = (POSIX::uname())[1];
+ my $scriptname = 'mxgraphs.cgi';
+@@ -21,6 +23,9 @@
+ my $ypoints_grey = 160;
+ my $ypoints_greydetail = 160;
+ my $ypoints_queue = 160;
++my $ypoints_spf = 160;
++my $ypoints_dkim = 160;
++my $ypoints_dmarc = 160;
+ my $rrd = '/var/lib/mailgraph/mailgraph.rrd';                          # path to where the Mailgraph RRD database is
+ my $rrd_virus = '/var/lib/mailgraph/mailgraph_virus.rrd';              # path to where the Virus     RRD database is
+ my $rrd_queue = '/var/lib/queuegraph/mailqueues.rrd';                  # path to where the Mailqueue RRD database is
+@@ -39,17 +44,26 @@
+        sent        => '000099',                                        # rrggbb in hex
+        received    => '009900',
+        whitelist   => '999999',
+-       new         => 'C1C1C1',
++       new         => 'FF77EE',
+        early       => 'AA0000',
+        qspam       => '000000',
+        awl         => 'DDBB00',
+-       reconnectok => '88FF00',
++       reconnectok => '7700DD',
+        rejected    => 'AA0000',
+        bounced     => '000000',
+        virus       => 'DDBB00',
+        spam        => '999999',
+        active      => 'EFEF00',
+        deferred    => 'DD8800',
++       spfnone     => '12FF0A',
++       spffail     => 'f80b6f',
++       spfpass     => '2E5fEC',
++        dkimnone    => 'E6E27A',
++        dkimfail    => 'FF6600',
++       dkimpass    => '3013EC',
++       dmarcnone   => 'F0B166',
++       dmarcfail   => 'f11717',
++       dmarcpass   => '00FFD5',
+ );
+ sub rrd_graph(@)
+@@ -276,6 +290,128 @@
+ }
++sub graph_spf($$)
++{
++       my ($range, $file) = @_;
++       my $step = $range*$points_per_sample/$xpoints;
++       rrd_graph($range, $file, $ypoints_spf,
++               "DEF:spfpass=$rrd:spfpass:AVERAGE",
++               "DEF:mspfpass=$rrd:spfpass:MAX",
++               "CDEF:rspfpass=spfpass,60,*",
++               "CDEF:dspfpass=spfpass,UN,0,spfpass,IF,$step,*",
++               "CDEF:sspfpass=PREV,UN,dspfpass,PREV,IF,dspfpass,+",
++               "CDEF:rmspfpass=mspfpass,60,*",
++               "AREA:rspfpass#$color{spfpass}:SPF pass",
++               'GPRINT:sspfpass:MAX:total\: %8.0lf msgs',
++               'GPRINT:rspfpass:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmspfpass:MAX:max\: %4.0lf msgs/min\l',
++
++               "DEF:spfnone=$rrd:spfnone:AVERAGE",
++               "DEF:mspfnone=$rrd:spfnone:MAX",
++               "CDEF:rspfnone=spfnone,60,*",
++               "CDEF:dspfnone=spfnone,UN,0,spfnone,IF,$step,*",
++               "CDEF:sspfnone=PREV,UN,dspfnone,PREV,IF,dspfnone,+",
++               "CDEF:rmspfnone=mspfnone,60,*",
++               "LINE2:rspfnone#$color{spfnone}:SPF none",
++               'GPRINT:sspfnone:MAX:total\: %8.0lf msgs',
++               'GPRINT:rspfnone:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmspfnone:MAX:max\: %4.0lf msgs/min\l',
++
++               "DEF:spffail=$rrd:spffail:AVERAGE",
++               "DEF:mspffail=$rrd:spffail:MAX",
++               "CDEF:rspffail=spffail,60,*",
++               "CDEF:dspffail=spffail,UN,0,spffail,IF,$step,*",
++               "CDEF:sspffail=PREV,UN,dspffail,PREV,IF,dspffail,+",
++               "CDEF:rmspffail=mspffail,60,*",
++               "LINE2:rspffail#$color{spffail}:SPF fail",
++               'GPRINT:sspffail:MAX:total\: %8.0lf msgs',
++               'GPRINT:rspffail:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmspffail:MAX:max\: %4.0lf msgs/min\l',
++       );
++}
++
++
++sub graph_dkim($$)
++{
++       my ($range, $file) = @_;
++       my $step = $range*$points_per_sample/$xpoints;
++       rrd_graph($range, $file, $ypoints_dkim,
++               "DEF:dkimpass=$rrd:dkimpass:AVERAGE",
++               "DEF:mdkimpass=$rrd:dkimpass:MAX",
++               "CDEF:rdkimpass=dkimpass,60,*",
++               "CDEF:ddkimpass=dkimpass,UN,0,dkimpass,IF,$step,*",
++               "CDEF:sdkimpass=PREV,UN,ddkimpass,PREV,IF,ddkimpass,+",
++               "CDEF:rmdkimpass=mdkimpass,60,*",
++               "AREA:rdkimpass#$color{dkimpass}:DKIM pass",
++               'GPRINT:sdkimpass:MAX:total\: %8.0lf msgs',
++               'GPRINT:rdkimpass:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmdkimpass:MAX:max\: %4.0lf msgs/min\l',
++
++               "DEF:dkimnone=$rrd:dkimnone:AVERAGE",
++               "DEF:mdkimnone=$rrd:dkimnone:MAX",
++               "CDEF:rdkimnone=dkimnone,60,*",
++               "CDEF:ddkimnone=dkimnone,UN,0,dkimnone,IF,$step,*",
++               "CDEF:sdkimnone=PREV,UN,ddkimnone,PREV,IF,ddkimnone,+",
++               "CDEF:rmdkimnone=mdkimnone,60,*",
++               "LINE2:rdkimnone#$color{dkimnone}:DKIM none",
++               'GPRINT:sdkimnone:MAX:total\: %8.0lf msgs',
++               'GPRINT:rdkimnone:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmdkimnone:MAX:max\: %4.0lf msgs/min\l',
++
++               "DEF:dkimfail=$rrd:dkimfail:AVERAGE",
++               "DEF:mdkimfail=$rrd:dkimfail:MAX",
++               "CDEF:rdkimfail=dkimfail,60,*",
++               "CDEF:ddkimfail=dkimfail,UN,0,dkimfail,IF,$step,*",
++               "CDEF:sdkimfail=PREV,UN,ddkimfail,PREV,IF,ddkimfail,+",
++               "CDEF:rmdkimfail=mdkimfail,60,*",
++               "LINE2:rdkimfail#$color{dkimfail}:DKIM fail",
++               'GPRINT:sdkimfail:MAX:total\: %8.0lf msgs',
++               'GPRINT:rdkimfail:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmdkimfail:MAX:max\: %4.0lf msgs/min\l',
++       );
++}
++
++
++sub graph_dmarc($$)
++{
++       my ($range, $file) = @_;
++       my $step = $range*$points_per_sample/$xpoints;
++       rrd_graph($range, $file, $ypoints_dmarc,
++               "DEF:dmarcpass=$rrd:dmarcpass:AVERAGE",
++               "DEF:mdmarcpass=$rrd:dmarcpass:MAX",
++               "CDEF:rdmarcpass=dmarcpass,60,*",
++               "CDEF:ddmarcpass=dmarcpass,UN,0,dmarcpass,IF,$step,*",
++               "CDEF:sdmarcpass=PREV,UN,ddmarcpass,PREV,IF,ddmarcpass,+",
++               "CDEF:rmdmarcpass=mdmarcpass,60,*",
++               "AREA:rdmarcpass#$color{dmarcpass}:DMARC pass",
++               'GPRINT:sdmarcpass:MAX:total\: %8.0lf msgs',
++               'GPRINT:rdmarcpass:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmdmarcpass:MAX:max\: %4.0lf msgs/min\l',
++
++               "DEF:dmarcnone=$rrd:dmarcnone:AVERAGE",
++               "DEF:mdmarcnone=$rrd:dmarcnone:MAX",
++               "CDEF:rdmarcnone=dmarcnone,60,*",
++               "CDEF:ddmarcnone=dmarcnone,UN,0,dmarcnone,IF,$step,*",
++               "CDEF:sdmarcnone=PREV,UN,ddmarcnone,PREV,IF,ddmarcnone,+",
++               "CDEF:rmdmarcnone=mdmarcnone,60,*",
++               "LINE2:rdmarcnone#$color{dmarcnone}:DMARC none",
++               'GPRINT:sdmarcnone:MAX:total\: %8.0lf msgs',
++               'GPRINT:rdmarcnone:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmdmarcnone:MAX:max\: %4.0lf msgs/min\l',
++
++               "DEF:dmarcfail=$rrd:dmarcfail:AVERAGE",
++               "DEF:mdmarcfail=$rrd:dmarcfail:MAX",
++               "CDEF:rdmarcfail=dmarcfail,60,*",
++               "CDEF:ddmarcfail=dmarcfail,UN,0,dmarcfail,IF,$step,*",
++               "CDEF:sdmarcfail=PREV,UN,ddmarcfail,PREV,IF,ddmarcfail,+",
++               "CDEF:rmdmarcfail=mdmarcfail,60,*",
++               "LINE2:rdmarcfail#$color{dmarcfail}:DMARC fail",
++               'GPRINT:sdmarcfail:MAX:total\: %8.0lf msgs',
++               'GPRINT:rdmarcfail:AVERAGE:avg\: %5.2lf msgs/min',
++               'GPRINT:rmdmarcfail:MAX:max\: %4.0lf msgs/min\l',
++       );
++}
++
+ sub print_html()
+ {
+        print "Content-Type: text/html\n\n";
+@@ -293,7 +429,7 @@
+  <body>
+ HEADER
+-       print "<h1>Mailserver Statistiken f&uuml;r<br>$host</h1>\n";
++       print "<h1>Mailserver Statistiken f&uuml;r mx01.nausch.org</h1>\n";
+        print "<ul id=\"jump\">\n";
+        for my $n (0..$#graphs) {
+@@ -308,6 +444,9 @@
+                 print "<p><img src=\"$scriptname?${n}-g\" alt=\"mxgraphs - greylisted\"/></p>\n";
+                 print "<p><img src=\"$scriptname?${n}-d\" alt=\"mxgraphs - greylisted (detailed)\"/></p>\n";
+                 print "<p><img src=\"$scriptname?${n}-q\" alt=\"mxgraphs - mailqueues\"/></p>\n";
++               print "<p><img src=\"$scriptname?${n}-f\" alt=\"mxgraphs - spf checked\"/></p>\n";
++               print "<p><img src=\"$scriptname?${n}-m\" alt=\"mxgraphs - dkim checked\"/></p>\n";
++               print "<p><img src=\"$scriptname?${n}-c\" alt=\"mxgraphs - dmarc checked\"/></p>\n";
+        }
+        print <<FOOTER;
+@@ -321,10 +460,12 @@
+    <tr class="row0">
+     <td class="col0 leftalign">
+      <a href="http://dokuwiki.nausch.org/doku.php/centos:mail_c6:mta_11#mxgraphs">MX-Graphs </a>$VERSION by
+-     <a href="mailto:django@it-ignorant.org?subject=MX-Graphs%20for%20my%20Mailserver">Django</a> based on
++     <a href="mailto:django@mailserver.guru?subject=MX-Graphs%20for%20my%20Mailserver">Django</a> based on
+     </td>
+     <td>
+      <a href="http://david.schweikert.ch/">David Schweikert's</a> <a href="http://mailgraph.schweikert.ch/">Mailgraph</a>,
++     <a href="http://www.gichenbacher.de/kontakt">Markus Neubauer's </a>
++     <a href="http://www.std-soft.com/bfaq/46-k-faq-server/117-greygraph-mail-statistik.html">Greygraph</a>,
+     </td>
+     <td class="col2 rightalign" rowspan="3">
+      <a href="http://oss.oetiker.ch/rrdtool/"><img src="rrdtool-3dlogo.png" alt="" width="135" height="50" align="right" align="middle"/></a>
+@@ -334,15 +475,9 @@
+     <td class="col0 leftalign">
+     </td>
+     <td class="col1 leftalign">
+-     <a href="http://www.gichenbacher.de/kontakt">Markus Neubauer's </a>
+-     <a href="http://www.std-soft.com/bfaq/46-k-faq-server/117-greygraph-mail-statistik.html">Greygraph</a> and
+-    </td>
+-   </tr>
+-   <tr class="row2">
+-    <td class="col0 leftalign">
+-    </td>
+-    <td class="col1 leftalign">
+-     <a href="http://www.arschkrebs.de/">Ralf Hildebrandt's </a><a href="http://www.arschkrebs.de/postfix/queuegraph">Queuegraph</a>.
++     <a href="http://www.arschkrebs.de/">Ralf Hildebrandt's </a><a href="http://www.arschkrebs.de/postfix/queuegraph">Queuegraph</a> and
++     <a href="https://www.kernel-error.de/">Sebastian van de Meer's </a>
++     <a href="https://www.kernel-error.de/postfix/mailgraph-aufgebohrt">mailgraphpatches</a>.
+     </td>
+    </tr>
+   </table>
+@@ -404,6 +539,21 @@
+                         graph_queue($graphs[$1]{seconds}, $file);
+                         send_image($file);
+                 }
++               elsif($img =~ /^(\d+)-f$/) {
++                       my $file = "$tmp_dir/$uri/mailgraph_$1_spf.png";
++                       graph_spf($graphs[$1]{seconds}, $file);
++                       send_image($file);
++               }
++                elsif($img =~ /^(\d+)-m$/) {
++                        my $file = "$tmp_dir/$uri/mailgraph_$1_dkim.png";
++                        graph_dkim($graphs[$1]{seconds}, $file);
++                        send_image($file);
++                }
++               elsif($img =~ /^(\d+)-c$/) {
++                       my $file = "$tmp_dir/$uri/mailgraph_$1_dmarc.png";
++                       graph_dmarc($graphs[$1]{seconds}, $file);
++                       send_image($file);
++               }
+                else {
+                        die "ERROR: invalid argument\n";
+                }
+</file>
+Wie auch schon zuvor bei unserem Daemon, kopieren wir zum Patchen das Perl-Script nach //**/tmp/**//.
+   # cp /usr/share/mxgraphs/mxgraphs.cgi /tmp/
+Dann laden wir den obigen Patch auf unseren Rechner und legen diesen im Verzeichnis //**/tmp**// unter dem Dateinamen **mxgraphs_spf_dkim_dmarc.patch** ab.
+Anschließend wenden wir den Patch an.
+   # patch -p0 < mxgraphs_spf_dkim_dmarc.patch
+Und kopieren zu guter Letzt das geänderte Script an Ort und Stelle.
+   # mv /tmp/mxgraphs.cgi /usr/share/mxgraphs/ -f
+Alternativ können wir auch nachfolgendes CGI-sript, bei dem der Patch schon angewandt wurde, auf unseren Rechner laden und ins Verzeichnis //**/usr/share/mxgraphs/**// kopieren.
+<file perl /usr/share/mxgraphs/mxgraphs.cgi>#!/usr/bin/perl -w
+# mxgraphs -- detailed postfix mail traffic statistics
+# copyright (c) 2000-2007 ETH Zurich
+# copyright (c) 2000-2007 David Schweikert <david@schweikert.ch>
+# modifed 2011 for grey Markus Neubauer <neubauer@std-service.com>
+# modified 2013 for mxgraphs by Django <django@it-ignorant.de>
+# released under the GNU General Public License
+use RRDs;
+use POSIX qw(uname);
+my $VERSION = "0.02";
+my $host = (POSIX::uname())[1];
+my $scriptname = 'mxgraphs.cgi';
+my $xpoints = 800;
+my $points_per_sample = 3;
+my $ypoints = 160;
+my $ypoints_err = 160;
+my $ypoints_grey = 160;
+my $ypoints_greydetail = 160;
+my $ypoints_queue = 160;
+my $rrd = '/var/lib/mailgraph/mailgraph.rrd';                           # path to where the Mailgraph RRD database is
+my $rrd_virus = '/var/lib/mailgraph/mailgraph_virus.rrd';               # path to where the Virus     RRD database is
+my $rrd_queue = '/var/lib/queuegraph/mailqueues.rrd';                   # path to where the Mailqueue RRD database is
+my $rrd_grey = '/var/lib/greygraph/greygraph.rrd';                      # path to where the Greygraph RRD database is
+my $rrd_spam = '/var/lib/greygraph/greygraph_spam.rrd';                 # path to where the Spam      RRD database is
+my $tmp_dir = '/var/cache/mxgraphs';                                    # temporary directory where to store the images
+my @graphs = (
+        { title => 'Letzten 24 Stunden', seconds => 3600*24,     },
+        { title => 'Letzten 7 Tage',     seconds => 3600*24*7,   },
+        { title => 'Letzten 31 Tage',    seconds => 3600*24*31,  },
+        { title => 'Letzten 12 Monate',  seconds => 3600*24*365, },
+);
+my %color = (
+        sent        => '000099',                                        # rrggbb in hex
+        received    => '009900',
+        whitelist   => '999999',
+        new         => 'C1C1C1',
+        early       => 'AA0000',
+        qspam       => '000000',
+        awl         => 'DDBB00',
+        reconnectok => '88FF00',
+        rejected    => 'AA0000',
+        bounced     => '000000',
+        virus       => 'DDBB00',
+        spam        => '999999',
+        active      => 'EFEF00',
+        deferred    => 'DD8800',
+);
+sub rrd_graph(@)
+        {
+        my ($range, $file, $ypoints, @rrdargs) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        my $end  = time; $end -= $end % $step;
+        my $date = localtime(time);
+        $date =~ s|:|\\:|g unless $RRDs::VERSION < 1.199908;
+        my ($graphret,$xs,$ys) = RRDs::graph($file,
+                '--imgformat', 'PNG',
+                '--width', $xpoints,
+                '--height', $ypoints,
+                '--start', "-$range",
+                '--end', $end,
+                '--vertical-label', 'msgs/min',
+                '--lower-limit', 0,
+                '--units-exponent', 0,                                  # don't show milli-messages/s
+                '--lazy',
+                '--color', 'SHADEA#ffffff',
+                '--color', 'SHADEB#ffffff',
+                '--color', 'BACK#ffffff',
+                $RRDs::VERSION < 1.2002 ? () : ( '--slope-mode'),
+                @rrdargs,
+                'COMMENT:['.$date.']\r',
+        );
+        my $ERR=RRDs::error;
+        die "ERROR: $ERR\n" if $ERR;
+}
+sub graph($$)
+        {
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints,
+                "DEF:sent=$rrd:sent:AVERAGE",
+                "DEF:msent=$rrd:sent:MAX",
+                "CDEF:rsent=sent,60,*",
+                "CDEF:rmsent=msent,60,*",
+                "CDEF:dsent=sent,UN,0,sent,IF,$step,*",
+                "CDEF:ssent=PREV,UN,dsent,PREV,IF,dsent,+",
+                "AREA:rsent#$color{sent}:Sent                    ",
+                'GPRINT:ssent:MAX:total\: %15.0lf msgs',
+                'GPRINT:rsent:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmsent:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:recv=$rrd:recv:AVERAGE",
+                "DEF:mrecv=$rrd:recv:MAX",
+                "CDEF:rrecv=recv,60,*",
+                "CDEF:rmrecv=mrecv,60,*",
+                "CDEF:drecv=recv,UN,0,recv,IF,$step,*",
+                "CDEF:srecv=PREV,UN,drecv,PREV,IF,drecv,+",
+                "LINE2:rrecv#$color{received}:Received                ",
+                'GPRINT:srecv:MAX:total\: %15.0lf msgs',
+                'GPRINT:rrecv:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmrecv:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub graph_err($$)
+        {
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_err,
+                "DEF:bounced=$rrd:bounced:AVERAGE",
+                "DEF:mbounced=$rrd:bounced:MAX",
+                "CDEF:rbounced=bounced,60,*",
+                "CDEF:dbounced=bounced,UN,0,bounced,IF,$step,*",
+                "CDEF:sbounced=PREV,UN,dbounced,PREV,IF,dbounced,+",
+                "CDEF:rmbounced=mbounced,60,*",
+                "AREA:rbounced#$color{bounced}:Bounced                 ",
+                'GPRINT:sbounced:MAX:total\: %15.0lf msgs',
+                'GPRINT:rbounced:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmbounced:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:virus=$rrd_virus:virus:AVERAGE",
+                "DEF:mvirus=$rrd_virus:virus:MAX",
+                "CDEF:rvirus=virus,60,*",
+                "CDEF:dvirus=virus,UN,0,virus,IF,$step,*",
+                "CDEF:svirus=PREV,UN,dvirus,PREV,IF,dvirus,+",
+                "CDEF:rmvirus=mvirus,60,*",
+                "STACK:rvirus#$color{virus}:Viruses                 ",
+                'GPRINT:svirus:MAX:total\: %15.0lf msgs',
+                'GPRINT:rvirus:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmvirus:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:spam=$rrd_virus:spam:AVERAGE",
+                "DEF:mspam=$rrd_virus:spam:MAX",
+                "CDEF:rspam=spam,60,*",
+                "CDEF:dspam=spam,UN,0,spam,IF,$step,*",
+                "CDEF:sspam=PREV,UN,dspam,PREV,IF,dspam,+",
+                "CDEF:rmspam=mspam,60,*",
+                "STACK:rspam#$color{spam}:Spam                    ",
+                'GPRINT:sspam:MAX:total\: %15.0lf msgs',
+                'GPRINT:rspam:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmspam:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:rejected=$rrd:rejected:AVERAGE",
+                "DEF:mrejected=$rrd:rejected:MAX",
+                "CDEF:rrejected=rejected,60,*",
+                "CDEF:drejected=rejected,UN,0,rejected,IF,$step,*",
+                "CDEF:srejected=PREV,UN,drejected,PREV,IF,drejected,+",
+                "CDEF:rmrejected=mrejected,60,*",
+                "LINE2:rrejected#$color{rejected}:Rejected                ",
+                'GPRINT:srejected:MAX:total\: %15.0lf msgs',
+                'GPRINT:rrejected:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmrejected:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub graph_queue($$)
+        {
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_queue,
+                "DEF:deferred=$rrd_queue:deferred:AVERAGE",
+                "AREA:deferred#$color{deferred}:Deferred                ",
+                'GPRINT:deferred:MAX:total\: %15.0lf msgs',
+                'GPRINT:deferred:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:deferred:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:active=$rrd_queue:active:AVERAGE",
+                "LINE2:active#$color{active}:Active+Incoming+Maildrop",
+                'GPRINT:active:MAX:total\: %15.0lf msgs',
+                'GPRINT:active:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:active:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub graph_grey($$)
+        {
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_grey,
+                "DEF:new=$rrd_grey:new:AVERAGE",
+                "DEF:mnew=$rrd_grey:new:MAX",
+                "CDEF:rnew=new,60,*",
+                "CDEF:rmnew=mnew,60,*",
+                "CDEF:dnew=new,UN,0,new,IF,$step,*",
+                "CDEF:snew=PREV,UN,dnew,PREV,IF,dnew,+",
+                "LINE2:rnew#$color{new}:New                     ",
+                'GPRINT:snew:MAX:total\: %15.0lf msgs',
+                'GPRINT:rnew:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmnew:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:reconnectok=$rrd_spam:reconnectok:AVERAGE",
+                "DEF:mreconnectok=$rrd_spam:reconnectok:MAX",
+                "CDEF:rreconnectok=reconnectok,60,*",
+                "CDEF:dreconnectok=reconnectok,UN,0,reconnectok,IF,$step,*",
+                "CDEF:sreconnectok=PREV,UN,dreconnectok,PREV,IF,dreconnectok,+",
+                "CDEF:rmreconnectok=mreconnectok,60,*",
+                "LINE2:rreconnectok#$color{reconnectok}:Reconnect O.K.          ",
+                'GPRINT:sreconnectok:MAX:total\: %15.0lf msgs',
+                'GPRINT:rreconnectok:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmreconnectok:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub graph_greydetail($$)
+{
+        my ($range, $file) = @_;
+        my $step = $range*$points_per_sample/$xpoints;
+        rrd_graph($range, $file, $ypoints_greydetail,
+                "DEF:whitelist=$rrd_grey:whitelist:AVERAGE",
+                "DEF:mwhitelist=$rrd_grey:whitelist:MAX",
+                "CDEF:rwhitelist=whitelist,60,*",
+                "CDEF:rmwhitelist=mwhitelist,60,*",
+                "CDEF:dwhitelist=whitelist,UN,0,whitelist,IF,$step,*",
+                "CDEF:swhitelist=PREV,UN,dwhitelist,PREV,IF,dwhitelist,+",
+                "LINE2:rwhitelist#$color{whitelist}:Whitelist               ",
+                'GPRINT:swhitelist:MAX:total\: %15.0lf msgs',
+                'GPRINT:rwhitelist:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmwhitelist:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:awl=$rrd_grey:awl:AVERAGE",
+                "DEF:mawl=$rrd_grey:awl:MAX",
+                "CDEF:rawl=awl,60,*",
+                "CDEF:dawl=awl,UN,0,awl,IF,$step,*",
+                "CDEF:sawl=PREV,UN,dawl,PREV,IF,dawl,+",
+                "CDEF:rmawl=mawl,60,*",
+                "LINE2:rawl#$color{awl}:Auto whitelist          ",
+                'GPRINT:sawl:MAX:total\: %15.0lf msgs',
+                'GPRINT:rawl:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmawl:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:spam=$rrd_spam:spam:AVERAGE",
+                "DEF:mspam=$rrd_spam:spam:MAX",
+                "CDEF:rspam=spam,60,*",
+                "CDEF:dspam=spam,UN,0,spam,IF,$step,*",
+                "CDEF:sspam=PREV,UN,dspam,PREV,IF,dspam,+",
+                "CDEF:rmspam=mspam,60,*",
+                "LINE2:rspam#$color{qspam}:Spam                    ",
+                'GPRINT:sspam:MAX:total\: %15.0lf msgs',
+                'GPRINT:rspam:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmspam:MAX:max\: %11.0lf msgs/min\l',
+                "DEF:early=$rrd_grey:early:AVERAGE",
+                "DEF:mearly=$rrd_grey:early:MAX",
+                "CDEF:rearly=early,60,*",
+                "CDEF:dearly=early,UN,0,early,IF,$step,*",
+                "CDEF:searly=PREV,UN,dearly,PREV,IF,dearly,+",
+                "CDEF:rmearly=mearly,60,*",
+                "STACK:rearly#$color{early}:Early connect           ",
+                'GPRINT:searly:MAX:total\: %15.0lf msgs',
+                'GPRINT:rearly:AVERAGE:avg\: %12.2lf msgs/min',
+                'GPRINT:rmearly:MAX:max\: %11.0lf msgs/min\l',
+        );
+}
+sub print_html()
+{
+        print "Content-Type: text/html\n\n";
+        print <<HEADER;
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html>
+ <head>
+  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
+  <title>Mailserver Statistiken auf $host</title>
+  <meta http-equiv="Refresh" content="300" />
+  <meta http-equiv="Pragma" content="no-cache" />
+  <link rel="stylesheet" href="mxgraphs.css" type="text/css" />
+ </head>
+ <body>
+HEADER
+        print "<h1>Mailserver Statistiken f&uuml;r<br>$host</h1>\n";
+        print "<ul id=\"jump\">\n";
+        for my $n (0..$#graphs) {
+                print "  <li><a href=\"#G$n\">$graphs[$n]{title}</a>&nbsp;</li>\n";
+        }
+        print "</ul>\n";
+        for my $n (0..$#graphs) {
+                print "<h2 id=\"G$n\">$graphs[$n]{title}</h2>\n";
+                print "<p><img src=\"$scriptname?${n}-n\" alt=\"mxgraphs - received and sent\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-e\" alt=\"mxgraphs - blocked\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-g\" alt=\"mxgraphs - greylisted\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-d\" alt=\"mxgraphs - greylisted (detailed)\"/></p>\n";
+                print "<p><img src=\"$scriptname?${n}-q\" alt=\"mxgraphs - mailqueues\"/></p>\n";
+        }
+        print <<FOOTER;
+ <hr/>
+  <table border="0" style="font-size:12px" width="900">
+   <colgroup>
+    <col width="200">
+    <col width="425">
+    <col width="123">
+   </colgroup>
+   <tr class="row0">
+    <td class="col0 leftalign">
+     <a href="http://dokuwiki.nausch.org/doku.php/centos:mail_c6:mta_11#mxgraphs">MX-Graphs </a>$VERSION by
+     <a href="mailto:django@it-ignorant.org?subject=MX-Graphs%20for%20my%20Mailserver">Django</a> based on
+    </td>
+    <td>
+     <a href="http://david.schweikert.ch/">David Schweikert's</a> <a href="http://mailgraph.schweikert.ch/">Mailgraph</a>,
+    </td>
+    <td class="col2 rightalign" rowspan="3">
+     <a href="http://oss.oetiker.ch/rrdtool/"><img src="rrdtool-3dlogo.png" alt="" width="135" height="50" align="right" align="middle"/></a>
+    </td>
+   </tr>
+   <tr class="row1">
+    <td class="col0 leftalign">
+    </td>
+    <td class="col1 leftalign">
+     <a href="http://www.gichenbacher.de/kontakt">Markus Neubauer's </a>
+     <a href="http://www.std-soft.com/bfaq/46-k-faq-server/117-greygraph-mail-statistik.html">Greygraph</a> and
+    </td>
+   </tr>
+   <tr class="row2">
+    <td class="col0 leftalign">
+    </td>
+    <td class="col1 leftalign">
+     <a href="http://www.arschkrebs.de/">Ralf Hildebrandt's </a><a href="http://www.arschkrebs.de/postfix/queuegraph">Queuegraph</a>.
+    </td>
+   </tr>
+  </table>
+ </body>
+</html>
+FOOTER
+}
+sub send_image($)
+{
+        my ($file)= @_;
+        -r $file or do {
+                print "Content-type: text/plain\n\nERROR: can't find $file\n";
+                exit 1;
+        };
+        print "Content-type: image/png\n";
+        print "Content-length: ".((stat($file))[7])."\n";
+        print "\n";
+        open(IMG, $file) or die;
+        my $data;
+        print $data while read(IMG, $data, 16384)>0;
+}
+sub main()
+{
+        my $uri = $ENV{REQUEST_URI} || '';
+        $uri =~ s/\/[^\/]+$//;
+        $uri =~ s/\//,/g;
+        $uri =~ s/(\~|\%7E)/tilde,/g;
+        mkdir $tmp_dir, 0777 unless -d $tmp_dir;
+        mkdir "$tmp_dir/$uri", 0777 unless -d "$tmp_dir/$uri";
+        my $img = $ENV{QUERY_STRING};
+        if(defined $img and $img =~ /\S/) {
+                if($img =~ /^(\d+)-n$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1.png";
+                        graph($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                elsif($img =~ /^(\d+)-e$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_err.png";
+                        graph_err($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                elsif($img =~ /^(\d+)-g$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_grey.png";
+                        graph_grey($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                elsif($img =~ /^(\d+)-d$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_greydetail.png";
+                        graph_greydetail($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                elsif($img =~ /^(\d+)-q$/) {
+                        my $file = "$tmp_dir/$uri/mxgraph_$1_queue.png";
+                        graph_queue($graphs[$1]{seconds}, $file);
+                        send_image($file);
+                }
+                else {
+                        die "ERROR: invalid argument\n";
+                }
+        }
+        else {
+                print_html;
+        }
+}
+main;
+</file>
+==== Webaufruf ====
+Über unseren [[https://mxgraphs.nausch.org|Vhost]] erhalten wir nun optisch schön ansprechende Übersichten über den Mailverkehr unseres MX.
+{{ :centos:mail_c6:mxgraphs_testmx.dmz.nausch.org.png?direct&601 |Bildschirmhardcopy: mxgraphs}}
+===== AWStats =====
+Mit Hilfe zweier Perlscripte erstellen wir nun täglich einen Statusbericht über das was unserem MX widerfahren ist, und rufen später diese Information via Firefox/Konqueror ab. :)
+==== Installation ====
+Die Grundinstallation von **//AWStats//** ist [[centos:awstats_c6|Logfileanalyse und -Auswertung mit AWStats unter CentOS 6.x]] ausfürlich beschrieben.
+<WRAP round important>**WICHTG**:
+Damit eine erfolgreiche LOG-Datei-Auswertung mit Hilfe von AWStats durchgeführt werden kann, müssen auf die Dateien /var/log/maillog* mit nachfolgendem Befehl die Zugriffsrechte angepasst werden.
+   # chmod 644 /var/log/maillog*
+</WRAP>
+==== Konfiguration ====
+Zur eigentlichen Logfileauswertung legen wir uns nun eine eigene Konfigurationdatei für //**AWStats**// an. Als Vorlage nutzen wir hier die, im **RPM** mitgelieferte default-Datei //**/etc/awstats/awstats.localhost.localdomain.conf**//.
+   # cp /etc/awstats/awstats.localhost.localdomain.conf /etc/awstats/awstats.mx1.nausch.org.conf
+Darin passen wir nun alle Konfigurationsoptionen, die für das **maillog** von Postfix relevant sind, an.
+   # vim /etc/awstats/awstats.mx1.nausch.org.conf
+<file bash /etc/awstats/awstats.mx1.nausch.org.conf># AWSTATS CONFIGURE FILE 7.0
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.350 $ - $Author: eldy $ - $Date: 2010/09/29 19:16:21 $
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+# Django : 2012-07-03
+# default: LogFile="/var/log/httpd/access_log"
+LogFile="perl /usr/bin/maillogconvert.pl standard < /var/log/maillog |"
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+# Django : 2012-07-03
+# default: LogType=W
+LogType=M
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+# Django : 2012-07-03
+# default: LogFormat=1
+LogFormat="%time2 %email %email_r %host %host_r %method %url %code %bytesd"
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+# Django : 2012-07-03
+# default: SiteDomain="localhost.localdomain"
+SiteDomain="mx1.nausch.org"
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+# Django : 2012-07-03
+# default: HostAliases="localhost 127.0.0.1"
+HostAliases=„localhost 127.0.0.1 REGEX[nausch\.org$] REGEX[www\.nausch\.org$]“
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoip' or 'geoipfree' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+#
+DNSLookup=2
+# When AWStats updates its statistics, it stores results of its analysis in
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/www/awstats"
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstats/icon"
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+# Django : 2012-07-03
+# default: AllowToUpdateStatsFromBrowser=0
+AllowToUpdateStatsFromBrowser=1
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line).
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+# Django : 2012-07-03
+# default: AllowAccessFromWebToAuthenticatedUsersOnly=0
+#AllowAccessFromWebToAuthenticatedUsersOnly=1
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+# Django : 2012-07-03
+# default: AllowAccessFromWebToFollowingAuthenticatedUsers=""
+# AllowAccessFromWebToFollowingAuthenticatedUsers="django bigchief"
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+# Django : 2012-07-03
+# default: SaveDatabaseFilesWithPermissionsForEveryone=0
+SaveDatabaseFilesWithPermissionsForEveryone=1
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=1
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.php index.html"
+#
+DefaultFile="index.php index.html"
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+# Django : 2012-07-03
+# default: SkipHosts="127.0.0.1
+SkipHosts=""
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+# Include in stats, only accesses from authenticated users that match one of
+# following entries. For example, if you want AWStats to filter access to keep
+# only stats for authenticated users, you can add those users names in
+# this parameter. Useful for statistics for per user ftp logs.
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "john bob REGEX[^testusers]"
+# Default: ""
+#
+OnlyUsers=""
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico rss xml swf zip arj rar gz z bz2 wav mp3 wma mpg avi"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico rss xml swf"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico rss xml swf"
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+AuthenticatedUsersNotCaseSensitive=0
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLNotCaseSensitive=0
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+#
+URLWithQuery=0
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+#
+URLWithQueryWithOnlyFollowingParameters=""
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+#
+URLWithQueryWithoutFollowingParameters=""
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+#
+URLReferrerWithQuery=0
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Example: "awstatswrapper.cgi?key=123"
+# Default: ""
+#
+WrapperScript=""
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script type="text/javascript" src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+# Django : 2012-07-03
+# default: LevelForBrowsersDetection=2
+LevelForBrowsersDetection=0         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+# Django : 2012-07-03
+# default: LevelForOSDetection=2
+LevelForOSDetection=0               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+# Django : 2012-07-03
+# default: LevelForRefererAnalyze=2
+LevelForRefererAnalyze=0            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+# Django : 2012-07-03
+# default: LevelForRobotsDetection=2
+LevelForRobotsDetection=0           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+# Django : 2012-07-03
+# default: LevelForSearchEnginesDetection=2
+LevelForSearchEnginesDetection=0    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+# Django : 2012-07-03
+# default: LevelForKeywordsDetection=2
+LevelForKeywordsDetection=0         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+# Django : 2012-07-03
+# default: LevelForFileTypesDetection=2
+LevelForFileTypesDetection=0        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+# Django : 2012-07-03
+# default: Expires=3600
+Expires=0
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+# Django : 2012-07-03
+# default: Lang="auto"
+Lang="de"
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+# Django : 2012-07-03
+# default: ShowSummary=UVPHB
+ShowSummary=HB
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+# Django : 2012-07-03
+# default: ShowMonthStats=UVPHB
+ShowMonthStats=HB
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+# Django : 2012-07-03
+# default: ShowDaysOfMonthStats=VPHB
+ShowDaysOfMonthStats=HB
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+# Default: VPHB, Possible column codes: VPHB
+# Django : 2012-07-03
+# default: ShowDaysOfWeekStats=PHB
+ShowDaysOfWeekStats=HB
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+# Django : 2012-07-03
+# default: ShowHoursStats=PHB
+ShowHoursStats=HB
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+# Django : 2012-07-03
+# default: ShowDomainsStats=PHB
+ShowDomainsStats=0
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+# Django : 2012-07-03
+# default: ShowHostsStats=PHBL
+ShowHostsStats=HBL
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+# Django : 2012-07-03
+# default: ShowRobotsStats=HBL
+ShowRobotsStats=0
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+# Django : 2012-07-03
+# default: ShowEMailSenders=0
+ShowEMailSenders=HBML
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+# Django : 2012-07-03
+# default: ShowEMailReceivers=0
+ShowEMailReceivers=HBML
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowSessionsStats=1
+ShowSessionsStats=0
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+# Django : 2012-07-03
+# default: ShowPagesStats=PBEX
+ShowPagesStats=0
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+# Django : 2012-07-03
+# default: ShowFileTypesStats=HB
+ShowFileTypesStats=0
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0
+# Show downloads chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HB
+# Django : 2012-07-03
+# default: ShowDownloadsStats=HB
+ShowDownloadsStats=0
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowOSStats=1
+ShowOSStats=0
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowBrowsersStats=1
+ShowBrowsersStats=0
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+# Django : 2012-07-03
+# default: ShowOriginStats=PH
+ShowOriginStats=0
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowKeyphrasesStats=1
+ShowKeyphrasesStats=0
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowKeywordsStats=1
+ShowKeywordsStats=0
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+# Django : 2012-07-03
+# default: ShowMiscStats=a
+ShowMiscStats=0
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowHTTPErrorsStats=1
+ShowHTTPErrorsStats=0
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+# Django : 2012-07-03
+# default: ShowSMTPErrorsStats=0
+ShowSMTPErrorsStats=1
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats for Downloads
+MaxNbOfDownloadsShown = 10
+MinHitDownloads = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+# Django : 2012-07-03
+# default: FirstDayOfWeek=0
+FirstDayOfWeek=1
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+# By default AWStats page contains meta tag robots=noindex,nofollow
+# If you want to have your statistics to be indexed, set this option to 1.
+# Default: 0
+#
+MetaRobot=0
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040")
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+# PLUGIN: Tooltips
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add tooltips pop-up help boxes to HTML report pages.
+# NOTE: This will increased HTML report pages size, thus server load and bandwidth.
+#
+# Django : 2012-07-03
+# default: #LoadPlugin="tooltips"
+LoadPlugin="tooltips"
+# PLUGIN: DecodeUTFKeys
+# REQUIRED MODULES: Encode and URI::Escape
+# PARAMETERS: None
+# DESCRIPTION: Allow AWStats to show correctly (in language charset)
+# keywords/keyphrases strings even if they were UTF8 coded by the
+# referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+# PLUGIN: IPv6
+# PARAMETERS: None
+# REQUIRED MODULES: Net::IP and Net::DNS
+# DESCRIPTION: This plugin gives AWStats capability to make reverse DNS
+# lookup on IPv6 addresses.
+#
+#LoadPlugin="ipv6"
+# PLUGIN: HashFiles
+# REQUIRED MODULES: Storable
+# PARAMETERS: None
+# DESCRIPTION: AWStats DNS cache files are read/saved as native hash files.
+# This increases DNS cache files loading speed, above all for very large web sites.
+#
+#LoadPlugin="hashfiles"
+# PLUGIN: UserInfo
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add a text (Firtname, Lastname, Office Department, ...) in
+# authenticated user reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+# PLUGIN: HostInfo
+# REQUIRED MODULES: Net::XWhois
+# PARAMETERS: None
+# DESCRIPTION: Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+# Django : 2012-07-03
+# default: #LoadPlugin="hostinfo"
+LoadPlugin="hostinfo"
+# PLUGIN: ClusterInfo
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add a text (for example a full hostname) in cluster reports for each cluster
+# number. A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+# PLUGIN: UrlAliases
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+# PLUGIN: TimeHiRes
+# REQUIRED MODULES: Time::HiRes (if Perl < 5.8)
+# PARAMETERS: None
+# DESCRIPTION: Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"
+# PLUGIN: TimeZone
+# REQUIRED MODULES: Time::Local
+# PARAMETERS: [timezone offset]
+# DESCRIPTION: Allow AWStats to adjust time stamps for a different timezone
+# This plugin reduces AWStats speed of 10% !!!!!!!
+# LoadPlugin="timezone"
+# LoadPlugin="timezone +2"
+# LoadPlugin="timezone CET"
+#
+#LoadPlugin="timezone +2"
+# PLUGIN: Rawlog
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+# PLUGIN: GraphApplet
+# REQUIRED MODULES: None
+# PARAMETERS: [CSS classes to override]
+# DESCRIPTION: Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+# PLUGIN: GraphGoogleChartAPI
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Replaces the standard charts with free Google API generated images
+# in HTML reports. If country data is available and more than one country has hits,
+# a map will be generated using Google Visualizations.
+# Note: The machine where reports are displayed must have Internet access for the
+# charts to be generated. The only data sent to Google includes the statistic numbers,
+# legend names and country names.
+# Warning: This plugin is not compatible with option BuildReportFormat=xhtml.
+#
+# Django : 2012-07-03
+# default: #LoadPlugin="graphgooglechartapi"
+LoadPlugin="graphgooglechartapi"
+# PLUGIN: GeoIPfree
+# REQUIRED MODULES: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# PARAMETERS: None
+# DESCRIPTION: Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database is free but not up to date) or the GeoIP plugin (need
+# Perl Geo::IP module from Maxmind, database is also free and up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed by up to 10% !
+#
+#LoadPlugin="geoipfree"
+# MAXMIND GEO IP MODULES: Please see documentation for notes on all Maxmind modules
+# PLUGIN: GeoIP
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/geoip.dat[+/pathto/override.txt]]
+# DESCRIPTION: Builds a country chart and adds an entry to the hosts
+# table with country name
+# Replace spaces in the path of geoip data file with string "%20".
+#
+# Django : 2012-07-03
+# default: #LoadPlugin="geoip GEOIP_STANDARD /pathto/GeoIP.dat"
+LoadPlugin="geoip GEOIP_STANDARD /usr/local/lib64/perl5/GeoIP.dat"
+# PLUGIN: GeoIP_City_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPCity.dat[+/pathto/override.txt]]
+# DESCRIPTION: This plugin adds a column under the hosts field and tracks the pageviews
+# and hits by city including regions.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+# Django : 2012-07-03
+# default: #LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /usr/local/lib64/perl5/GeoLiteCity.dat"
+# PLUGIN: GeoIP_ASN_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPASN.dat[+/pathto/override.txt][+http://linktoASlookup]]
+# DESCRIPTION: This plugin adds a chart of AS numbers where the host IP address is registered.
+# This plugin can display some ISP information if included in the database. You can also provide
+# a link that will be used to lookup additional registration data. Put the link at the end of
+# the parameter string and the report page will include the link with the full AS number at the end.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_asn_maxmind GEOIP_STANDARD /usr/local/geoip.dat+http://enc.com.au/itools/aut-num.php?autnum="
+# PLUGIN: GeoIP_Region_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPRegion.dat[+/pathto/override.txt]]
+# DESCRIPTION:This plugin adds a chart of hits by regions. Only regions for US and
+# Canada can be detected.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+# PLUGIN: GeoIP_ISP_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPISP.dat[+/pathto/override.txt]]
+# DESCRIPTION: This plugin adds a chart of hits by ISP.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+# PLUGIN: GeoIP_Org_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPOrg.dat[+/pathto/override.txt]]
+# DESCRIPTION: This plugin add a chart of hits by Organization name
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+#Include ""
+</file>
+Zusammengefasst sieht dann unsere Konfigurationdatei entsprechend wie folgt aus:
+   # egrep -v '(^#|^$)' /etc/awstats/awstats.mx1.nausch.org.conf
+<code bash>
+LogFile="perl /usr/bin/maillogconvert.pl standard < /var/log/maillog |"
+LogType=M
+LogFormat="%time2 %email %email_r %host %host_r %method %url %code %bytesd"
+LogSeparator=" "
+SiteDomain="mx1.nausch.org"
+HostAliases=„localhost 127.0.0.1 REGEX[nausch\.org$] REGEX[www\.nausch\.org$]“
+DNSLookup=2
+DirData="/var/www/awstats"
+DirCgi="/awstats"
+DirIcons="/awstats/icon"
+AllowToUpdateStatsFromBrowser=1
+AllowFullYearView=2
+EnableLockForUpdate=1
+DNSStaticCacheFile="dnscache.txt"
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+SkipDNSLookupFor=""
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+AllowAccessFromWebToFollowingIPAddresses=""
+CreateDirDataIfNotExists=0
+BuildHistoryFormat=text
+BuildReportFormat=html
+SaveDatabaseFilesWithPermissionsForEveryone=1
+PurgeLogFile=0
+ArchiveLogRecords=0
+KeepBackupOfHistoricFiles=1
+DefaultFile="index.php index.html"
+SkipHosts=""
+SkipUserAgents=""
+SkipFiles=""
+SkipReferrersBlackList=""
+OnlyHosts=""
+OnlyUserAgents=""
+OnlyUsers=""
+OnlyFiles=""
+NotPageList="css js class gif jpg jpeg png bmp ico rss xml swf"
+ValidHTTPCodes="200 304"
+ValidSMTPCodes="1 250"
+AuthenticatedUsersNotCaseSensitive=0
+URLNotCaseSensitive=0
+URLWithAnchor=0
+URLQuerySeparators="?;"
+URLWithQuery=0
+URLWithQueryWithOnlyFollowingParameters=""
+URLWithQueryWithoutFollowingParameters=""
+URLReferrerWithQuery=0
+WarningMessages=1
+ErrorMessages=""
+DebugMessages=0
+NbOfLinesForCorruptedLog=50
+WrapperScript=""
+DecodeUA=0
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+LevelForBrowsersDetection=0         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=0               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=0            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=0           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=0    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=0         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=0        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+UseFramesWhenCGI=1
+DetailedReportsOnNewWindows=1
+Expires=0
+MaxRowsInHTMLOutput=1000
+Lang="de"
+DirLang="./lang"
+ShowMenu=1
+ShowSummary=HB
+ShowMonthStats=HB
+ShowDaysOfMonthStats=HB
+ShowDaysOfWeekStats=HB
+ShowHoursStats=HB
+ShowDomainsStats=0
+ShowHostsStats=HBL
+ShowAuthenticatedUsers=0
+ShowRobotsStats=0
+ShowWormsStats=0
+ShowEMailSenders=HBML
+ShowEMailReceivers=HBML
+ShowSessionsStats=0
+ShowPagesStats=0
+ShowFileTypesStats=0
+ShowFileSizesStats=0
+ShowDownloadsStats=0
+ShowOSStats=0
+ShowBrowsersStats=0
+ShowScreenSizeStats=0
+ShowOriginStats=0
+ShowKeyphrasesStats=0
+ShowKeywordsStats=0
+ShowMiscStats=0
+ShowHTTPErrorsStats=0
+ShowSMTPErrorsStats=1
+ShowClusterStats=0
+AddDataArrayMonthStats=1
+AddDataArrayShowDaysOfMonthStats=1
+AddDataArrayShowDaysOfWeekStats=1
+AddDataArrayShowHoursStats=1
+IncludeInternalLinksInOriginSection=0
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+MaxNbOfDownloadsShown = 10
+MinHitDownloads = 1
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+FirstDayOfWeek=1
+ShowFlagLinks=""
+ShowLinksOnUrl=1
+UseHTTPSLinkForUrl=""
+MaxLengthOfShownURL=64
+HTMLHeadSection=""
+HTMLEndSection=""
+MetaRobot=0
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+BarWidth   = 260
+BarHeight  = 90
+StyleSheet=""
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040")
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+LoadPlugin="tooltips"
+LoadPlugin="hostinfo"
+LoadPlugin="graphgooglechartapi"
+LoadPlugin="geoip GEOIP_STANDARD /usr/local/lib64/perl5/GeoIP.dat"
+LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /usr/local/lib64/perl5/GeoLiteCity.dat"
+ExtraTrackedRowsLimit=500
+</code>
+Nach erfolgreicher Konfiguration steht dem ersten Aufruf nichts mehr im Wege. Der Aufruf erfolgt über folgende URL:
+   $ firefox http://aw-stats.nausch.org/awstats/awstats.pl?config=mx1.nausch.org
+{{ :centos:mail_c6:awstats_maillog.png?direct&800 |Bildschirmhardcopy: AWStats vom Maillog}}
+====== Links ======
+  * **[[centos:mail_c6:start|Zurück zum Kapitel >>Mailserverinstallation unter CentOS 6<<]]**
+  * **[[wiki:start|Zurück zu >>Projekte und Themenkapitel<<]]**
+  * **[[http://dokuwiki.nausch.org/doku.php/|Zurück zur Startseite]]**