centos:mail_c7:horde_1

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung		 Vorhergehende Überarbeitung
centos:mail_c7:horde_1 [11.09.2014 07:41. ] – [Horde s unter CentOS 7.x - Grundinstallation und Konfiguration] djangocentos:mail_c7:horde_1 [20.04.2018 10:46. ] (aktuell) – Externe Bearbeitung 127.0.0.1
Zeile 1330: Zeile 1330:
 /var/lib/pear/pkgxml/php-horde-horde.xml /var/lib/pear/pkgxml/php-horde-horde.xml
 </code> </code>
 +
 +==== fehlende PECL-Pakete installieren ====
 +Gemäß den Empfehlungen aus der [[http://www.horde.org/apps/horde/docs/INSTALL|INSTALL]]-Dokumentation, installieren wir nun noch die fehlenden PECL-Pakete php-pecl-imagick
 +
 +Zum Manipulieren von Graphiken wird vom Horde-Team empfohlen (siehe [[http://www.horde.org/apps/horde/docs/INSTALL|INSTALL]]-Dokumentation), das RPM-Paket **php-pecl-imagick** zu installieren.
 +
 +Die Installation des benötigten Paketes holen wir nun noch nach.
 +   # yum install php-pecl-imagick -y
 +
 +Ferner wird noch laut der [[http://www.horde.org/apps/horde/docs/INSTALL|INSTALL]]-Dokumentation noch dringend empfohlen, die **horde_lz4**-Erweiterung, mit deren Hilfe Horde Caching- und Session-Daten in Echtzeit komprimieren und so die Speicherbelastung des Servers reduzieren kann.
 +
 +<WRAP center round info>
 +Bis des Horde-Maintainer [[remi@fedoraproject.org|Remi Collet]] das RPM in's offizielle EPEL-Repository aufgenimmt, greifen wir auf die Vorabversion((Stand 15. September '14)) zurück.
 +</WRAP>
 +
 +   # yum localinstall http://rpms.famillecollet.com/enterprise/7/remi/x86_64/php-horde-horde-lz4-1.0.7-1.el7.remi.5.4.x86_64.rpm -y
 +
 +Anschließend starten wir unseren http-Daemon 1x durch.
 +   # systemctl restart httpd.service
 +
 +===== Dokumentation =====
 +==== Installation ====
 +
 +   # cat /usr/share/doc/pear/horde/INSTALL
 +
 +<file /usr/share/doc/pear/horde/INSTALL>==============================
 + Installing Horde Framework 5
 +==============================
 +
 +:Contact: horde@lists.horde.org
 +
 +.. contents:: Contents
 +.. section-numbering::
 +
 +This document contains instructions for installing the Horde Framework on your
 +system.
 +
 +The Horde Framework, by itself, does not provide any significant end user
 +functionality; it provides a base for other applications and tools for
 +developers. When you have installed Horde as described below, you will
 +probably want to install some of the available Horde applications, such as
 +IMP_ (a webmail client), or Kronolith_ (a calendar). There is a list of Horde
 +applications and projects at http://www.horde.org/apps.
 +
 +If you are interested in developing applications for Horde, there is developer
 +documentation and references available at http://dev.horde.org/, and some
 +tutorials and papers on Horde available at
 +http://www.horde.org/community/papers.
 +
 +For information on the capabilities and features of Horde, see the file
 +README_ in the top-level directory of the Horde distribution.
 +
 +.. _IMP: http://www.horde.org/apps/imp
 +.. _Kronolith: http://www.horde.org/apps/kronolith
 +
 +
 +Quick Install
 +=============
 +
 +These are very terse instructions how to install Horde and its prerequisites
 +on a LAMP_ (Linux, Apache, MySQL, PHP) sytem.  They are addressed to
 +experienced administrators who know exactly what they are doing.  For more
 +detailed instructions, start reading below at Prerequisites_.
 +
 +1. Compiling PHP for Apache 2::
 +
 +     cd php-x.x.x/
 +     ./configure --with-apxs2=/usr/sbin/apxs2 \
 +                 --with-gettext --enable-mbstring --with-gd \
 +                 --with-png-dir=/usr --with-jpeg-dir=/usr \
 +                 [--with-mysql|--with-pgsql|--with-ldap]
 +                 [--with-tidy]
 +     make
 +     make install
 +
 +2. Restart Apache.
 +
 +3. Make sure your PEAR package is up-to-date::
 +
 +     pear upgrade PEAR
 +
 +4. Register Horde PEAR channel::
 +
 +     pear channel-discover pear.horde.org
 +
 +5. Set Horde installation directory::
 +
 +     pear install horde/horde_role
 +     pear run-scripts horde/horde_role
 +
 +6. Install Horde::
 +
 +     pear install -a -B horde/horde
 +
 +7. Configure Horde::
 +
 +     cd config/
 +     cp conf.php.dist conf.php
 +
 +8. Finish configuration::
 +
 +     http://your-server/horde/
 +
 +   Go to Administration => Configuration => Horde
 +   (Or navigate to http://your-server/horde/admin/config)
 +
 +9. Create database tables
 +
 +   Go to Administration => Configuration. Click ``Update All DB Schemas``.
 +
 +10. Test Horde (optional)
 +
 +   Enable the test script in the Horde configuration at the ``General`` in the
 +   ``PHP Settings`` section, or edit ``horde/config/conf.php`` and set
 +   ``'testdisable'`` to false.
 +
 +   Go to::
 +
 +     http://your-server/horde/test.php
 +
 +   .. Important:: Disable the test script again after you are done.
 +
 +.. _LAMP: http://www.wikipedia.org/wiki/LAMP_(software_bundle)
 +
 +
 +Prerequisites
 +=============
 +
 +The following prerequisites are **REQUIRED** for Horde to function properly.
 +
 +1. A webserver that supports PHP.
 +
 +   Horde is primarily developed under the Apache and Lighttpd webservers,
 +   which we recommend.  These servers are available from:
 +
 +      - http://httpd.apache.org/
 +      - http://www.lighttpd.net/
 +
 +2. PHP 5.3.0 or above.
 +
 +   PHP is the interpreted language in which Horde is written.
 +
 +   You can obtain PHP sources at::
 +
 +      http://www.php.net/
 +
 +   .. Note:: Although the PHP 5.3 API is supported, for stability, performance,
 +      and security reasons it is **HIGHLY RECOMMENDED** to use a version of
 +      PHP >= 5.4.0.
 +
 +   .. Note:: While it may be possible to install PHP using the package manager
 +      for your operating system, it is not recommended to do so if your
 +      distribution (e.g. Debian) does NOT update the actual PHP version in
 +      its package updates. Otherwise, you will be stuck with a PHP version that
 +      does not contain the most recent bug and security patches. On these
 +      systems, it is **HIGHLY RECOMMENDED** to either install PHP from source
 +      OR use a 3rd party package repository that contains the most recently
 +      released PHP version on the branch (5.4, 5.5, etc.) that you want to use.
 +
 +   Follow the instructions in the PHP package to build PHP for your system. If
 +   you use Apache, be sure to build PHP as a library with one of the following
 +   options::
 +
 +       --with-apache
 +       --with-apxs
 +       --with-apxs2
 +
 +   options to ``./configure``, and not as a standalone executable.
 +
 +   The following PHP extensions respective options are **REQUIRED** by Horde
 +   (listed with their own prerequisites and configure options). In many cases,
 +   the required libraries and tools can be obtained as packages from your
 +   operating system vendor.
 +
 +   a. Gettext support. ``--with-gettext``
 +
 +      Gettext is the GNU Translation Project's localization library.
 +      Horde uses gettext to provide local translations of text displayed by
 +      applications. Information on obtaining the gettext package is available
 +      at
 +
 +         http://www.gnu.org/software/gettext/gettext.html
 +
 +      See also note below on configuring Translations_.
 +
 +      All Horde translations are stored in UTF-8, so your underlying system
 +      MUST support UTF-8 for all locales that you wish to provide translation
 +      support for.
 +
 +   b. XML and DOM support.
 +
 +      XML and DOM support are enabled in PHP 5 by default. You only have to
 +      make sure that you do **not** use ``--disable-dom``,
 +      ``--disable-simplexml``, or ``--disable-xml``.
 +
 +      Make sure you are using a newer (v2.7 or greater) version of libxml.
 +      Older versions of libxml are broken when handling certain charsets.
 +
 +   The following PHP options are **RECOMMENDED** to enable advanced features in
 +   Horde:
 +
 +   a. File Upload Support
 +
 +      File upload support is **REQUIRED** by many applications to allow
 +      advanced features to work. To enable file upload support:
 +
 +          1. In your php.ini file, the following line **must** be present::
 +
 +                file_uploads = On
 +
 +          2. Your temporary upload directory **must** be writable to the user
 +             the web server is running as.  If you leave the configuration
 +             option ``upload_tmp_dir`` blank in ``php.ini``, PHP will use the
 +             default directory compiled into it (normally ``/tmp`` on
 +             Unix-like systems).
 +
 +          3. Set the maximum size of the uploaded files via the
 +             ``upload_max_filesize`` configuration option in ``php.ini``.  For
 +             example, to allow 5 MB attachments, place the following line in
 +             your ``php.ini`` file::
 +
 +                upload_max_filesize = 5M
 +
 +       If either ``file_uploads`` is turned off, or your temporary upload
 +       directory is *not* writable by the server, all file upload
 +       functionality will be disabled by Horde and will not be available to
 +       the user.
 +
 +       See the `File Uploads`_ FAQ entry for further information.
 +
 +   b. A preferences container.
 +
 +      Horde applications can store user preferences in an SQL database, an
 +      LDAP directory, an IMSP server, a Kolab server, or in PHP sessions.
 +
 +      For SQL database preferences storage, Horde is thoroughly tested on
 +      MySQL(i) (``--with-mysql(i)``) and PostgreSQL (``--with-pgsql``), and has
 +      been reported to work with SQLite (enabled by default).
 +
 +      Preferences can also be stored via LDAP (``--with-ldap``), Kolab
 +      (``--with-ldap``), and IMSP.
 +
 +      Alternatively, preferences can be stored in PHP sessions, which
 +      requires no external programs or configure options, but which will not
 +      maintain preferences between sessions.
 +
 +      While the LDAP, database, Kolab, or IMSP server need not be running on
 +      the machine onto which you are installing Horde, the appropriate
 +      client libraries to access the server must be available locally.
 +
 +      If a preference container is not configured, no preference options
 +      will be configurable via Horde's web interface - the default values
 +      stored in each applications ``config/prefs.php`` file will be used.
 +
 +   c. Multibyte character support (mbstring and iconv extensions) ``--enable-mbstring``
 +
 +      If these extensions are enabled, Horde can better support multibyte
 +      character sets.
 +
 +      For iconv support you should use the GNU libiconv library, which is more
 +      stable and supports more charsets, compared to other iconv
 +      implementations, like Solaris', for example.
 +
 +      Iconv support is enabled by default in PHP 5. You only have to make sure
 +      that you do **not** use ``--without-iconv``
 +
 +   d. GD support ``--with-gd``
 +
 +      Horde will use the GD extension to perform manipulations on image data
 +      through the Horde_Image library.
 +
 +      If you want GD to be able to work with PNG images, you should use the
 +      ``--with-png-dir`` option to make sure PHP can find the PNG libraries
 +      it needs to compile.
 +
 +      If you want GD to be able to work with JPEG images, you should use the
 +      ``--with-jpeg-dir`` option to make sure PHP can find the JPEG libraries
 +      it needs to compile.
 +
 +      You can also use the imagick_ extension or the ImageMagick_ package to do
 +      these manipulations instead. The imagick_ extension is the recommended
 +      method for image manipulation. See the ``Image Manipulation`` tab of the
 +      Horde configuration for more details. ImageMagick version 6.5.7 or better
 +      is recommended.
 +
 +      .. _imagick: http://pecl.php.net/package/imagick
 +      .. _ImageMagick: http://www.imagemagick.org
 +
 +   e. tidy ``--with-tidy``
 +
 +      The tidy PHP extension is required to sanitize HTML data.
 +
 +   .. Important:: Additionally, individual Horde applications may **REQUIRE**
 +                  or **RECOMMEND** other options to be built into PHP
 +                  also. Please check ``docs/INSTALL`` for all applications you
 +                  wish to use to see if other PHP options are needed.
 +
 +   f. fileinfo
 +
 +      Allows Horde applications to guess the MIME type of files by analyzing
 +      their contents.
 +
 +      This extension is automatically enabled by default.
 +
 +   g. intl
 +
 +      The intl extension is required to handle display of Internationalized
 +      Domain Names (see RFC 3490), e.g in e-mail addresses.
 +
 +      This extension can be enabled by adding the ``--enable-intl`` option
 +      when compiling PHP.
 +
 +   h. _`curl` ``--with-curl``
 +
 +      The `curl extension`_, if installed, will be used instead of PHP's
 +      fopen() when retrieving data from external HTTP servers (remote
 +      calendars, web APIs, etc.). This is much more reliable and flexible, so
 +      it is recommended to either enable it or install the http_ extension.
 +
 +      This extension can be enabled by adding the ``--with-curl`` option when
 +      compiling PHP.
 +
 +3. PEAR Modules
 +
 +   PEAR is short for "PHP Extension and Application Repository".  The goal of
 +   PEAR is to provide a means of distributing reusable code.
 +
 +   For more information, see http://pear.php.net/
 +
 +   .. Important:: Make sure you are running a supported (i.e. new enough)
 +                  version of PEAR: use the test script described below under
 +                  "`Configuring Horde`_".  Do **not** use the PEAR version
 +                  from ftp.horde.org.
 +
 +   Check that the path where the PEAR packages are installed are part of the
 +   ``include_path`` parameter that PHP uses to find PEAR packages.
 +
 +   Run the command::
 +
 +     pear config-show
 +
 +   You will see something like::
 +
 +     PEAR directory   php_dir   /usr/share/php
 +
 +   Now open the php.ini file of your system, for example ``/etc/php.ini``,
 +   find the ``include_path`` and make sure that ``/usr/share/php`` is part of
 +   the list.  If you had to change that value, restart the web server after
 +   saving ``php.ini``.
 +
 +   .. Important:: If you are going to install Horde the recommended way,
 +                  i.e. using the PEAR installer, you can skip the remainder of
 +                  this section. Installing Horde through PEAR will
 +                  automatically download and install all required PEAR
 +                  packages.
 +
 +   These PEAR packages are **RECOMMENDED** to be installed:
 +
 +   a. Net_DNS2
 +
 +      If installed, it will be used instead of the built-in PHP function
 +      gethostbyaddr() for host name lookups. This has the advantage that
 +      Net_DNS2 has configurable timeouts and retries.
 +      To install, enter the following at the command prompt::
 +
 +        pear install Net_DNS2
 +
 +   b. Services_Weather (>= 1.3.1)
 +
 +      **REQUIRED** only if you wish to use the weather.com block on the portal
 +      page.
 +      To install, enter the following at the command prompt::
 +
 +        pear install Services_Weather
 +
 +      Additional steps are required if you want use the METAR weather block on
 +      the portal page. See the file ``data/Services_Weather/buildMetarDB.php``
 +      in your PEAR directory for details.
 +
 +   c. File_Fstab
 +
 +     Required only if you use the localhost driver for the Accounts block.
 +     To install, enter the following at the command prompt::
 +
 +       pear install File_Fstab
 +
 +   This method of installing PEAR packages requires that you have a PHP version
 +   that has been compiled as a static binary.  All versions of PHP build both
 +   both a SAPI module (Apache, CGI, etc.) and a command-line (CLI) binary.
 +   Check if you have a php binary in ``/usr/local/bin`` (``/usr/bin`` if you
 +   installed from an operating system package) before recompiling.
 +
 +   For more detailed directions on installing PEAR packages, see the PEAR
 +   documentation at http://pear.php.net/manual/
 +
 +4. PECL Modules
 +
 +   PECL is short for "PHP Extension Community Library".  The goal of PECL is
 +   to provide a means of easily distributing PHP extensions.
 +
 +   For more information, see http://pecl.php.net/
 +
 +   PECL is the "sister" of PEAR and uses the same packaging and distribution
 +   system as PEAR, so the configuration/setup is essentially identical to the
 +   PEAR instructions above.
 +
 +   When you install a PECL extension, you have to add it to your ``php.ini``
 +   so it gets loaded.  Add the following line to your ``php.ini`` file to load
 +   the extension (the extension should be installed in the directory specified
 +   by the ``extension_dir`` option in ``php.ini``)::
 +
 +     extension=fileinfo.so
 +
 +   Or on Windows::
 +
 +     extension=fileinfo.dll
 +
 +   After that, restart your webserver.
 +
 +   These PECL packages are **RECOMMENDED** to be installed:
 +
 +   a. imagick
 +
 +      The imagick extension can be used by Horde's image library to provide
 +      image manipulations.
 +
 +      To install, enter the following at the command prompt::
 +
 +        pecl install imagick
 +
 +      The imagick extension **must** be compiled against ImageMagick version
 +      6.2.9 or better, though version 6.5.7 or better is recommended.
 +
 +   b. horde_lz4
 +
 +      If the horde_lz4 extension is available, Horde can perform real-time
 +      compression on data, resulting in reduced storage load on the server for
 +      things like cache storage and session data. It is highly recommended.
 +
 +      To install, enter the following at the command prompt::
 +
 +        pecl install horde_lz4
 +
 +   c. memcache
 +
 +      If using memcache, the memcache PECL extension must be installed.
 +
 +      To install, enter the following at the command prompt::
 +
 +        pecl install memcache
 +
 +   d. _`http`
 +
 +      The `http extension`_, if installed, will be used instead of PHP's
 +      fopen() when retrieving data from external HTTP servers (remote
 +      calendars, web APIs, etc.). This is much more reliable and flexible, so
 +      it recommended to either install this or enable the curl_ extension.
 +
 +      To install, enter the following at the command prompt::
 +
 +        pecl install http
 +
 +   For additional help on using the pear command-line program to install PECL
 +   extensions, see the PEAR installation section above.
 +
 +
 +The following non-PHP prerequisites are **RECOMMENDED**.
 +
 +1. aspell - Spelling Checker
 +
 +   Aspell, a comand-line program, is used as Horde's spell-checking engine.
 +   You must install and configure aspell to use Horde's spell-check feature.
 +
 +   Version 0.60 or higher is REQUIRED.
 +
 +   You can obtain aspell from:
 +
 +      http://aspell.sourceforge.net/
 +
 +
 +The following non-PHP prerequisites are optional.
 +
 +1. Sendmail.
 +
 +   It is highly **RECOMMENDED** that Horde be configured to use SMTP for
 +   sending e-mails.
 +
 +   Alternatively, Horde can use the local sendmail program, or a program that
 +   implements the ``sendmail(8)`` API (as included with postfix, qmail, and
 +   exim, among others). However, local use of sendmail binaries to send mail
 +   is discouraged due to authentication/permission issues (since Horde will
 +   invoke the sendmail binary as the web/PHP user), and because it is not
 +   possible to reliably auto-configure sendmail since there is no unified
 +   API across platforms/sendmail variants.
 +
 +
 +Installing Horde
 +================
 +
 +The **RECOMMENDED** way to install Horde is using the PEAR installer.
 +Alternatively, if you want to run the latest development code or get the
 +latest not yet released fixes, you can install Horde from Git.
 +
 +
 +Installing with PEAR
 +~~~~~~~~~~~~~~~~~~~~
 +
 +Before beginning, make sure your PEAR package is up-to-date::
 +
 +   pear upgrade PEAR
 +
 +Next, you need to register the Horde PEAR channel server to your local PEAR
 +system. This has to be done only **once** ever on a single PEAR system::
 +
 +   pear channel-discover pear.horde.org
 +
 +Next install a so-called "role" for Horde. This role defines where Horde is
 +installed. This should be a directory in your web server's web root, e.g.
 +``/var/www/horde``. Again this has to be done only **once** ever on
 +a single PEAR system::
 +
 +   pear install horde/horde_role
 +   pear run-scripts horde/horde_role
 +
 +When installing Horde through PEAR now, the installer will automatically
 +install any dependencies of Horde too.  If you want to install Horde with all
 +optional dependencies, but without the binary PECL packages that have to be
 +compiled, specify both the ``-a`` and the ``-B`` flag::
 +
 +   pear install -a -B horde/horde
 +
 +By default, only the required dependencies will be installed::
 +
 +   pear install horde/horde
 +
 +If you want to install Horde even with all binary dependencies, you need to
 +remove the ``-B`` flag. Please note that this might also try to install PHP
 +extensions through PECL that might need further configuration or activation in
 +your PHP configuration::
 +
 +   pear install -a horde/horde
 +
 +
 +Installing into separate PEAR
 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 +
 +.. Warning:: Unless you really know **why** you want to do this, you probably
 +             do **not** want to do this. Use the general PEAR installation
 +             instructions from above instead.
 +
 +If you want to create a separate PEAR installation for installing Horde,
 +independent from the system-wide PEAR installation, this can be done with the
 +following commands (in this example, ``/var/www/horde`` is used as the
 +location of the web-accessible horde directory)::
 +
 +   mkdir /var/www/horde
 +   pear config-create /var/www/horde /var/www/horde/pear.conf
 +   pear -c /var/www/horde/pear.conf install pear
 +
 +Then follow the regular installation steps, but use the ``pear`` command from
 +the PEAR installation you just created, e.g.::
 +
 +   /var/www/horde/pear/pear -c /var/www/horde/pear.conf channel-discover \
 +       pear.horde.org
 +
 +Finally configure your web server in some way to point PHP's ``include_path``
 +setting to the PEAR installation and the ``PHP_PEAR_SYSCONF_DIR`` environment
 +variable to the web root::
 +
 +   php_value include_path /var/www/horde/pear/php
 +   SetEnv PHP_PEAR_SYSCONF_DIR /var/www/horde
 +
 +It is recommended to not use the .htaccess file in ``/var/www/horde/`` to set
 +these values because it will be overwritten with every further update.
 +
 +
 +Installing from Git
 +~~~~~~~~~~~~~~~~~~~
 +
 +See http://www.horde.org/development/git
 +
 +
 +Configuring Horde
 +=================
 +
 +1. Configuring the web server
 +
 +   Horde requires the following webserver settings. Examples shown are for
 +   Apache; other webservers' configurations will differ.
 +
 +   a. PHP interpretation for files matching ``*.php``::
 +
 +         AddType application/x-httpd-php .php
 +
 +      .. Note:: The above instructions may not work if you have specified PHP
 +                as an output filter with ``SetOutputFilter`` directive in
 +                Apache 2.x versions.  In particular, Red Hat 8.0 and above
 +                Apache 2.x RPMS have the output filter set, and **MUST NOT**
 +                have the above ``AddType`` directive added.
 +
 +   b. ``index.php`` as an index file (brought up when a user requests a URL for
 +      a directory)::
 +
 +         DirectoryIndex index.php
 +
 +   c. If you plan to provide ActiveSync support to your users, you have to
 +      create an alias of the ``/Microsoft-Servers-ActiveSync`` URL to
 +      ``/horde/rpc.php``. See http://wiki.horde.org/ActiveSync for details.
 +
 +   c. If you plan to provide CardDAV support to users with iOS devices, you
 +      have to create an alias of the ``/.well-known/carddav`` URL to
 +      ``/horde/rpc.php``. See http://wiki.horde.org/CardDAV for details.
 +
 +2. Configuring Horde
 +
 +   To configure Horde, change to the ``config/`` directory of the installed
 +   distribution, and copy the ``conf.php.dist`` configuration file to
 +   ``conf.php``.
 +
 +   Documentation on the format and purpose of the configuration files in the
 +   ``config/`` directory can be found in each file. The defaults will be
 +   correct for most sites. If you wish to customize Horde's appearance and
 +   behavior, create "local" files for the configuration file you want to
 +   change. For example if you want to change the default value and lock a
 +   preference, create a ``config/prefs.local.php`` file with the following
 +   content::
 +
 +      <?php
 +      $_prefs['prefname']['value'] = 'somedefault';
 +      $_prefs['prefname']['locked'] = true;
 +
 +   This works with any configuration file.
 +
 +   .. Warning:: All configuration files in Horde are PHP scripts that are
 +                executed by the web server. If you make an error in one of
 +                these files, Horde might stop working. Thus it is always a good
 +                idea to test the configuration files after you edited them. If
 +                you want to test mime_drivers.local.php for example run::
 +
 +                   php -l mime_drivers.local.php
 +
 +3. Completing Configuration
 +
 +   You can now access Horde without a password, and you will be logged in as
 +   an administrator.
 +
 +   .. Important:: You should first configure a real authentication
 +                  backend and designate which accounts in your real
 +                  backend will be administrator accounts.  Horde does
 +                  **NOT** have a default administrator account - all
 +                  users, including administrators, must exist in the
 +                  actual authentication backend.  Click on ``Configuration``
 +                  in the ``Administration`` menu and configure Horde.
 +                  Start in the ``Authentication`` tab.
 +
 +   Here is an example for configuring authentication against a remote IMAP
 +   server.  Similar steps apply for authenticating against a database, an LDAP
 +   server, etc.
 +
 +   a. In the ``Which users should be treated as administrators`` field enter a
 +      comma separated list of user names of your choosing. This will control
 +      who is allowed to make configuration changes, see passwords, potentially
 +      add users, etc.
 +
 +   b. In the ``What backend should we use for authenticating users to Horde``
 +      pulldown menu select ``IMAP authentication``. The page will reload and
 +      you will have specific options for IMAP authentication.
 +
 +   c. In the ``Configuration type`` pulldown menu select ``Separate values``.
 +      The page will reload with additional options. Fill in the remaining
 +      three fields appropriately:
 +
 +      - IP name/number of the IMAP server
 +      - For a secure connection, select port 993.
 +      - Select the secure connection protocol to use, if desired.
 +
 +   Continue to configure Horde through all the tabs of the configuration
 +   interface and click on ``Generate Horde Configuration``. An important item
 +   that you probably want to configure is the ``Database Settings``, which
 +   defines the database configuration that is used, by default, for several
 +   different Horde sub-systems.
 +
 +   .. Important:: By default Horde will be using database backends for most
 +                  sub-systems. If you do not plan to use a database with Horde,
 +                  you need to go through all tabs of the configuration screen
 +                  and change the configuration for those systems from ``SQL``
 +                  to a suitable alternative.
 +
 +   Configuration of applications in ``registry.php`` is documented in the
 +   ``INSTALL`` file of each application.  Most applications require you to
 +   configure them with a "Horde administrator" account.  A Horde administrator
 +   account is any normal Horde account that has been added to the administrator
 +   list in the ``Authentication`` tab of the Horde configuration.
 +
 +   The other files in that directory need only be modified if you wish to
 +   customize Horde's appearance or behaviour -- the defaults will work at most
 +   sites.
 +
 +4. Creating databases
 +
 +   Once you created the database configuration in the previous step, you can
 +   create all database tables by hitting the ``Update all DB schemas`` button
 +   in the configuration screen.
 +
 +   Please note that this requires the database that you entered in the database
 +   configuration to already exist, and the configured database user to have
 +   sufficient permissions to create new tables in this database.
 +
 +   Alternatively you can run the ``horde-db-migrate`` script in the Horde
 +   directory from the command line.
 +
 +   If you installed Horde into the global PEAR system, this script should be in
 +   your command path. If the script cannot be found in your path, you need to
 +   specify the full path to the script, e.g.::
 +
 +      /var/www/horde/pear/horde-db-migrate
 +
 +   You can use the ``pear`` command to find the place where the script has been
 +   installed::
 +
 +      pear config-get bin_dir
 +
 +   If you installed into a local PEAR installation, you need to tell PHP and
 +   PEAR where to find the installation and the script, e.g.::
 +
 +      PHP_PEAR_SYSCONF_DIR=/var/www/horde php \
 +          -d include_path=/var/www/horde/pear/php \
 +          /var/www/horde/pear/horde-db-migrate
 +
 +5. Setting up alarm emails
 +
 +   If you want your users to be able to receive emails from the Horde_Alarm
 +   system, you must set up a cron entry for ``horde-alarms``, you
 +   must have at least one administrator specified in the Horde configuration,
 +   and you must have the PHP CLI installed (a CGI binary is not supported -
 +   ``php -v`` will report what kind of PHP binary you have).
 +
 +   Running the job every 5 minutes is recommended::
 +
 +      # Horde Alarms
 +      */5 * * * * /usr/bin/horde-alarms
 +
 +   If not installing Horde through PEAR or if PEAR's ``bin_dir`` configuration
 +   doesn't point to ``/usr/bin/``, replace ``/usr/bin/horde-alarms`` with the
 +   path to the ``horde-alarms`` script in your Horde installation.
 +
 +6. Testing Horde
 +
 +   Once you have configured your webserver, PHP, and Horde, bring up the
 +   included test page in your Web browser to ensure that all necessary
 +   prerequisites have been met. If you installed Horde as described above, the
 +   URL to the test page would be::
 +
 +      http://your-server/horde/test.php
 +
 +   The test script is disabled by default for security reasons. To enable
 +   set the 'testdisable' configuration option to false. After testing is
 +   completed, the testdisable option should be reset to true.
 +
 +   Check that your PHP and PEAR versions are acceptably recent, that all
 +   required capabilities are present, and that ``magic_quotes_runtime``
 +   is set to ``Off``. Then note the ``Session counter: 1`` line under ``PHP
 +   Sessions``, and reload the page. The session counter should increment.
 +
 +   If you get a warning like ``Failed opening '/path/to/test.php' for
 +   inclusion``, make sure that the web server has the permission to read the
 +   ``test.php`` file.
 +
 +7. Securing Horde
 +
 +   a. Passwords
 +
 +      Some of Horde's configuration files contain passwords which local users
 +      could use to access your database.  It is recommended to ensure that at
 +      least the Horde configuration files (in ``config/``) are not readable to
 +      system users.  There are ``.htaccess`` files restricting access to
 +      directories that do not need to be accessed directly; before relying on
 +      those, ensure that your webserver supports ``.htaccess`` and is
 +      configured to use them, and that the files in those directories are in
 +      fact inaccessible via the browser.
 +
 +      An additional approach is to make Horde's configuration files owned by
 +      the user ``root`` and by a group which only the webserver user belongs
 +      to, and then making them readable only to owner and group.  For example,
 +      if your webserver runs as ``www.www``, do as follows::
 +
 +         chown -R root.www config/*
 +         find config/ -type f -exec chmod 0440 '{}' \;
 +
 +   b. Sessions
 +
 +      Session data -- including hashed versions of your users' passwords, in
 +      some applications -- may not be stored as securely as necessary.
 +
 +      If you are using file-based PHP sessions (which are the default), be
 +      sure that session files are not being written into ``/tmp`` with
 +      permissions that allow other users to read them. Ideally, change the
 +      ``session.save_path`` setting in ``php.ini`` to a directory only
 +      readable and writeable by your webserver.
 +
 +      Additionally, you can change the session handler of PHP to use any
 +      storage backend requested (e.g. SQL database) via the ``Custom Session
 +      Handler`` tab in the Horde configuration.
 +
 +   For more information about securing your webserver, PHP and Horde, see the
 +   `docs/SECURITY`_ file.
 +
 +
 +Dynamic View Troubleshooting
 +============================
 +
 +Horde's dynamic, AJAX-based views differ from traditional Horde applications in
 +that they require javascript support; in fact, javascript performs the bulk of
 +the page display.  As such, debugging the dynamic views is more complex than
 +with other Horde applications.
 +
 +If you run into problems with the dynamic view, first follow the
 +troubleshooting steps for Horde - namely checking PHP error logs and Horde
 +debug logs to determine if the problem is located there.  Server-based errors
 +will be logged in the traditional manner.
 +
 +Only if traditional debugging is unsuccessful will you need to move to
 +javascript debugging.  It is highly recommended to use Mozilla Firefox with
 +the `Firebug`_ extension installed in order to better track javascript
 +errors - it is what the developers use and makes deciphering error codes and
 +error line numbers much easier.  You will also want to turn off javascript
 +caching, if on, in ``horde/conf/conf.php``.
 +
 +If you do find a javascript error, it would be great if you could fix the
 +issue and provide a patch :)  Absent that, before reporting to the mailing
 +list, IRC room, or bug tracker make sure you have a valid javascript error,
 +the file the error is being caused in, the line number of the error, and a
 +reliable way to reproduce the error.  Developers/other interested folks will
 +be much more likely to help you if all this information is provided.
 +
 +
 +Configuring Applications
 +========================
 +
 +A list of available Horde applications can be found at
 +
 +   http://www.horde.org/apps
 +
 +Instructions on configuring Horde applications can be found in the ``INSTALL``
 +file in the application's ``docs/`` directory.
 +
 +
 +Temporary Files
 +===============
 +
 +Various Horde applications will generate temporary files in PHP's temporary
 +directory (see the ``General`` tab in the Horde configuration).  For various
 +reasons, some of these files may not be removed when the user's session
 +ends. To reclaim this disk space, it may be necessary to periodically delete
 +these old temporary files.
 +
 +An example cron-based solution can be found at
 +``horde/scripts/temp-cleanup.cron`` in PEAR's ``data_dir`` directory.  Another
 +possible solution is to use utilities like ``tmpwatch``, ``tmpreaper`` or
 +anything similar to remove old files.
 +
 +Stale sessions are automatically pruned by PHP according to the
 +`session.gc_probability`_, `session.gc_divisor`_, and
 +`session.gc_maxlifetime`_ settings located in ``php.ini``.
 +
 +
 +Translations
 +============
 +
 +Note for international users: Horde uses GNU gettext to provide local
 +translations of text displayed by applications; the translations are found in
 +the po/ directory.  If a translation is not yet available for your locale (and
 +you wish to create one), or if you're having trouble using a provided
 +translation, please see the docs/TRANSLATIONS_ file for instructions.
 +
 +
 +Obtaining Support
 +=================
 +
 +If you encounter problems with Horde, help is available!
 +
 +The Horde Frequently Asked Questions List (FAQ), available on the Web at
 +
 +  http://wiki.horde.org/FAQ
 +
 +The Horde Project runs a number of mailing lists, for individual applications
 +and for issues relating to the project as a whole. Information, archives, and
 +subscription information can be found at
 +
 +  http://www.horde.org/community/mail
 +
 +Lastly, Horde developers, contributors and users may also be found on IRC,
 +on the channel #horde on the Freenode Network (irc.freenode.net).
 +
 +Please keep in mind that Horde is free software written by volunteers.
 +For information on reasonable support expectations, please read
 +
 +  http://www.horde.org/community/support
 +
 +Thanks for using Horde!
 +
 +The Horde Team
 +
 +
 +.. _README: README
 +.. _docs/SECURITY: SECURITY
 +.. _docs/TRANSLATIONS: TRANSLATIONS
 +.. _`curl extension`: http://php.net/curl
 +.. _`http extension`: http://php.net/http
 +.. _`File Uploads`: http://wiki.horde.org/FAQ/Admin/FileUploads
 +.. _`Firebug`: http://www.getfirebug.com/
 +.. _`session.gc_probability`: http://www.php.net/manual/en/session.configuration.php#ini.session.gc-probability
 +.. _`session.gc_divisor`: http://www.php.net/manual/en/session.configuration.php#ini.session.gc-divisor
 +.. _`session.gc_maxlifetime`: http://www.php.net/manual/en/session.configuration.php#ini.session.gc-maxlifetime
 +</file>
 +
 +==== Sicherheit ====
 +   # cat /usr/share/doc/pear/horde/SECURITY
 +
 +<file /usr/share/doc/pear/horde/SECURITY>======================
 + Horde Security Notes
 +======================
 +
 +:Contact: horde@lists.horde.org
 +
 +.. contents:: Contents
 +.. section-numbering::
 +
 +
 +Temporary files
 +===============
 +
 +Horde applications make extensive use of temporary files.  In order to make
 +sure these files are secure, you should make sure your installation meets the
 +following criteria.
 +
 +Sites may gain increased security by defining a temporary directory in the
 +Horde configuration which is writable by the web server, but not writable by
 +other users.  Since the temporary files may contain sensitive information it
 +is best to also make these file unreadable by other users.  That is, they can
 +be made readable and writable only by the web server user.
 +
 +
 +PHP Sessions
 +============
 +
 +For the most security, you should enable PHP session cookies by enabling the
 +PHP setting ``session.use_cookies``. When doing so, be sure to set an
 +appropriate cookie path and cookie domain in the Horde configuration also to
 +secure your cookies. You should even force session cookie usage in the Horde
 +configuration, which is the default setting in all Horde versions now.
 +
 +If you want to use HTTPS connections, consider forcing users to HTTPS in the
 +Horde configuration. This will force cookies to be sent over secure connections
 +only and helps to prevent sidejacking.
 +
 +If PHP sessions are set to use the ``files`` save_handler, then these files
 +should be secured properly. Sites can increase security by setting the PHP
 +setting ``session.save_path`` to a directory that is only readable and
 +writable by the web server process.
 +
 +Sites with a large user base should consider setting the
 +``session.entropy_file`` and ``session.entropy_length`` to appropriate values.
 +
 +Horde will encrypt the user credentials before storing them in the session.
 +Thus, a compromised sessions will not reveal the user's stored credentials.
 +
 +
 +Default database passwords
 +==========================
 +
 +The Horde documentation and sample database creation scripts create a default
 +user and password for accessing the horde database.  Using this password in a
 +production environment is a security hole, since an attacker will easily guess
 +it.
 +
 +It is very important that sites change at least the password to something
 +secure.
 +
 +
 +Prevent configuration file reading and writing
 +==============================================
 +
 +The configuration files may contain sensitive data (such as database
 +passwords) that should not be read or written by local system users or remote
 +web users.
 +
 +If you use a Unix system, one way to make the configuration files and
 +directories accessible only to the web server is as follows.  Here we assume
 +that the web server runs as the user ``apache`` and the files are located in
 +``/home/httpd/html`` -- substitute the correct user or file path if needed::
 +
 +$ chown -R apache /home/httpd/html/horde/config
 +$ chown -R apache /home/httpd/html/horde/*/config
 +$ chmod -R go-rwx /home/httpd/html/horde/config
 +$ chmod -R go-rwx /home/httpd/html/horde/*/config
 +
 +For completely fascist permissions, you can make the entire Horde tree
 +inaccessible by anyone except the web server user (and root)::
 +
 +$ chown -R apache /home/httpd/html/horde
 +$ chmod -R go-rwx  /home/httpd/html/horde
 +$ chmod -R a-w   /home/httpd/html/horde/
 +
 +Note that the last line makes all files unwritable by any user (only root can
 +override this).  This makes the site secure, but may make it more difficult to
 +administrate.  In particular, it will defeat the Horde administrative
 +configuration interface, forcing you to update the Horde configuration files
 +manually (as per the INSTALL_ instructions).
 +
 +The above will not secure the files if other user's on the same machine can
 +run scripts as the apache user.  If you need to protect against this you
 +should make other user's scripts run under their own account with some
 +facility such as apache's suexec module.  You need to watch out not only for
 +cgi scripts, but also for other modules like mod_php, mod_perl, mod_python,
 +etc. that may be in use on your server.
 +
 +.. _INSTALL: ?f=INSTALL.html
 +
 +
 +Restricting the test script
 +===========================
 +
 +The test script (``horde/test.php``) provides a wealth of information that can
 +be used against the site by attackers.  This script is disabled by default for
 +this reason.
 +
 +This script is configured via the 'testdisable' configuration option.
 +
 +After manually enabling the script, and once you have confirmed that
 +everything is working, you should disable access to the test script.
 +
 +
 +Preventing Apache from serving configuration and source files
 +==============================================================
 +
 +The Horde configuration files may contain sensitive data (such as database
 +passwords) that should not be served by the web server. Other directories
 +contain PHP source code that isn't intended for viewing by end-users. The
 +Horde group has provided ``.htaccess`` files in various directories to help
 +protect these files.  However, that depends on your web server honoring
 +``.htacess`` files (which is a performance hit, and may not be available in
 +all web servers).
 +
 +An Apache site can also prevent the web server from serving these
 +files by adding sections to ``httpd.conf`` such as the following::
 +
 +   <Directory "/home/httpd/html/horde/config">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/lib">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/locale">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/po">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/scripts">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/templates">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +
 +Repeat this pattern for each Horde application.  For example, for IMP you
 +would then add::
 +
 +   <Directory "/home/httpd/html/horde/imp/config">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/imp/lib">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/imp/locale">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/imp/po">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/imp/scripts">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +   <Directory "/home/httpd/html/horde/imp/templates">
 +       order deny,allow
 +       deny from all
 +   </Directory>
 +
 +
 +Setup scripts
 +=============
 +
 +There are various scripts use to setup or configure Horde.  If you allow other
 +users on the web server machine, you should protect these files from being
 +accessed by them.  On a unix system, you might restrict these files to root
 +access by using the following type of commands::
 +
 +$ chown -R root /home/httpd/html/horde/scripts
 +$ chown -R root /home/httpd/html/horde/*/scripts
 +$ chmod -R go-rwx /home/httpd/html/horde/scripts
 +$ chmod -R go-rwx /home/httpd/html/horde/*/scripts
 +
 +
 +Using a chroot web server setup
 +===============================
 +
 +Unix users may want to consider using a chroot environment for their web
 +server.  How to do this is beyond the scope of this document, but sufficient
 +information exists on the world wide web and/or in your server documentation
 +to complete this task.
 +
 +
 +Hiding PHP info from the user
 +=============================
 +
 +You should consider setting the following PHP variables in your ``php.ini``
 +file to prevent information leak to the user, or global insertion by the
 +user::
 +
 +   expose_php = Off
 +   display_errors = Off
 +   log_errors = On
 +   register_globals = Off
 +
 +You should also set up error logging (using the PHP ``error_log`` variable)
 +to log to a file, syslog, or other log destination.
 +
 +
 +Using a secure web server
 +=========================
 +
 +Horde depends on passing sensitive information (such as passwords and session
 +information) between the web server and the web client.  Using a secure
 +(SSL-enabled) web server will help protect this information as it traversing
 +the network.
 +
 +
 +Using a secure POP3/IMAP server
 +===============================
 +
 +If you are using a POP3/IMAP server with Horde (e.g. for authentication or for
 +IMP) then Horde is passing the user's login credentials between the web server
 +and the mail server.
 +
 +If your web server and IMAP server are on the same host, you can increase
 +security by forcing all traffic over the loopback or localhost interface so
 +that it is not exposed to your network.
 +
 +In cases where that is not possible, we recommend using a secure mail
 +connection such as IMAP-SSL or POP3-SSL to ensure that passwords remain safe.
 +
 +
 +LDAP Security
 +=============
 +
 +LDAP security is similar to the above POP3/IMAP server security issue.  If you
 +are using LDAP, you should make sure that you are not exposing ldap passwords
 +or any sensitive data in your LDAP database.
 +
 +
 +Database socket security
 +========================
 +
 +If your database (e.g. MySQL or PostgreSQL) is on the same host as your web
 +server, you may use unix sockets rather than tcp connections to help improve
 +your security (and performance).  If it doesn't support unix sockets, you can
 +achieve some better security by restricting the tcp support to the loopback or
 +localhost interface.
 +
 +If the database keeps its socket file (e.g. ``mysql.sock``) in a directory
 +like ``/tmp`` or ``/var/tmp``, you should set permissions carefully to ensure
 +that local users (if you have any) can't delete the socket.  The unix "sticky"
 +bit should already be sent on the temporary directory itself, but you also
 +need to make sure the socket itself isn't writable by "other" or users can
 +delete it.
 +
 +You might consider moving the socket file to another location such as
 +``/var/run`` or the top-level directory of your database program (e.g.
 +``/var/lib/mysql`` or ``/var/lib/pgsql``).
 +
 +
 +Sendmail or SMTP considerations
 +===============================
 +
 +In some cases, you can increase security by sending mail via the local
 +command-line sendmail program on your web server, rather than using SMTP.
 +However, there may be reasons to use SMTP instead, such as if your smtp server
 +does spam or virus checking which would be skipped using the local sendmail
 +program.
 +
 +
 +Additional Notes
 +================
 +
 +This is by far not a complete security HOWTO. This is just a compiled list of
 +what people have contributed so far. If you have tips, ideas, suggestions or
 +anything else that you think could help others in securing their Horde
 +installation, please let us know.
 +</file>
 +http://www.horde.org/apps/horde/docs/SECURITY
 +
 +==== Performance ====
 +  # cat /usr/share/doc/pear/horde/PERFORMANCE
 +
 +<file /usr/share/doc/pear/horde/PERFORMANCE>=========================
 + Horde Performance Guide
 +=========================
 +
 +:Contact: horde@lists.horde.org
 +
 +.. contents:: Contents
 +
 +
 +Some tips on performance tuning systems for Horde.  This does not cover
 +hardware tuning or even low level system (network, filesystem, etc) tuning.
 +
 +Don't apply the following tuning hints blindly.  Test your applications before
 +and after the changes under the conditions that are important for you.  For
 +some people it's more important to make them as fast as possible for a small
 +user base, others require the applications to scale well under a high load.
 +Some of these hints might even make the applications slower under certain
 +conditions or using a certain hardware.
 +
 +
 +Linux Tuning
 +============
 +
 +* Recompile RPMS for your architecture (e.g. i586, i686, athlon, etc).
 +  This applies most to your Apache, PHP, IMAP, and POP3 packages.
 +
 +
 +Webserver/PHP tuning
 +====================
 +
 +* Consider a PHP accelerator program.  See for example `The Zend Performance
 +  Suite`_, the `Alternative PHP Cache`_, eAccelerator_, or XCache_.  These
 +  accelerators speed up access by caching the compiled PHP code, eliminating
 +  the need to recompile the code for every single page load. **This is probably
 +  the easiest way to improve the performance of Horde**. See Autoloading_
 +  further down to get even more out of some of those accelerators.
 +
 +* Enable PHP output compression in the Horde configuration. Do not enable
 +  compression in the PHP configuration (i.e. in ``php.ini``), because certain
 +  scripts don't work well with compression and Horde takes care of disabling
 +  compression conditionally.
 +
 +* Keep the include path defined in ``php.ini`` as short as possible, with the
 +  most frequently used library paths first.  You don't need to include the
 +  local directory ``.`` because Horde always uses full paths instead of
 +  relative paths.
 +
 +* Use an optimized ``php.ini``: start with ``php.ini-recommended`` in your PHP
 +  dsitribution.
 +
 +* Don't run PHP session garbage collection too often if using a slow storage
 +  medium (like SQL). (See ``session.gc_probability`` in ``php.ini``)
 +
 +* If you have a large number of sessions and are using PHP's default file
 +  based session handler, consider storing them in hashed directory levels.
 +  (See ``session.save_path`` at http://www.php.net/session)
 +
 +* Consider using a faster storage medium for sessions, such as a tmpfs
 +  (if storing sessions locally) or memcache (for storing session information
 +  that can be accessed by multiple servers).
 +
 +* Only load as many Apache and PHP extensions as needed (to reduce memory
 +  usage).
 +
 +* Use statically compiled Apache modules, including the PHP module.
 +
 +* Use compiler optimizations (--prefer-non-pic, -O3, -march -mcpu, -msse,
 +  -mmmx, -mfpmath=sse, etc.)
 +
 +* If using SSL with a large site, consider a hardware SSL accelerator.
 +
 +* Use shared memory for the Apache SSL cache if possible.
 +
 +* To improve caching of static content if accessing Apache SSL with Internet
 +  Explorer, try setting longer expiration periods::
 +
 +    ExpiresActive On
 +    ExpiresByType image/png "now plus 1 month"
 +    ExpiresByType image/gif "now plus 1 month"
 +    ExpiresByType text/javascript "now plus 1 month"
 +    ExpiresByType application/x-javascript "now plus 1 month"
 +    ExpiresByType text/css "now plus 1 month"
 +
 +  .. Note:: You must compile the ``mod_expires`` extension into Apache in
 +            order to use these directives.
 +
 +  .. Warning:: This might cause problems if you upgrade Horde and the users'
 +               browsers still use the old file versions.
 +
 +* Disable DNS lookups in your Apache logging, or use a caching DNS server on
 +  the web server host.
 +
 +* Enable Apache keepalives.
 +
 +* You can configure Horde to serve all images, style sheets and/or static
 +  javascript files from a different server. This could be a very lightweight
 +  server without PHP (and other CGI modules) builtin. If using SSL to serve
 +  all pages, the images/js server will also have to serve SSL content or else
 +  browsers will complain about non-secure content in a secure page. Since this
 +  server does not need to handle dynamic content, it would be wise to use a
 +  high-performance server with low memory and/or system resource requirements
 +  (this `IBM Article`_ can provide further information). You need to set
 +  the ``themesuri`` and/or ``jsuri`` parameters in ``config/registry.php`` for
 +  all applications and copy all ``themes`` and/or ``js`` directories in the
 +  same directory layout to the other server.
 +
 +* Your webserver should use Expires headers to make sure static content can
 +  be cached on the user's browser.  For example, to make lighttpd set an
 +  expiration date on all graphics, javascript files, and stylesheets, add
 +  the following to ``lighttpd.conf``::
 +
 +    $HTTP["url"] =~ "\.(jpg|gif|png|js|css)$" {
 +        expire.url = ( "" => "access 1 months" )
 +    }
 +
 +* Enable caching in horde. Several applications make heavy use of caching and,
 +  if enabled, you will see a significant increase in performance.
 +
 +* Enable caching/compression of javascript and CSS. See `Yahoo's Analysis`_
 +  which concludes that "[r]educing the number of HTTP requests has the biggest
 +  impact on reducing response time". Caching via filesystem is HIGHLY
 +  RECOMMENDED: it is also the only way of caching that reliably works on all
 +  browsers. Caching can also be done via horde caching, but the
 +  cache-busters used to generate unique URLs when the cached content changes
 +  do not work 100% reliably across all browsers.
 +
 +* It is highly recommended to install the horde_lz4 package to activate
 +  compression for Horde data.  horde_lz4 is a minimal package that does
 +  real-time compression. On modern CPUs, this compression is as fast as an
 +  (unoptimized) memcpy action, making the compression essentially 'free' when
 +  compared to uncompressed data. horde_lz4 can be installed via PECL (see
 +  INSTALL for further details).
 +
 +.. _`The Zend Performance Suite`: http://www.zend.com/horde.php
 +.. _`Alternative PHP Cache`: http://www.php.net/apc
 +.. _eAccelerator: http://eaccelerator.net/
 +.. _XCache: http://xcache.lighttpd.net/
 +.. _`IBM Article`: http://www.ibm.com/developerworks/web/library/wa-ltwebserv/
 +.. _`Yahoo's Analysis`: http://yuiblog.com/blog/2006/11/28/performance-research-part-1/
 +
 +
 +Sending Mail
 +============
 +
 +* Generally using a local sendmail command to send mail will result in better
 +  peformance than using a SMTP connection.
 +
 +* Some MTA servers may be faster or more efficient than others.  Consider
 +  switching to a faster format if needed.
 +
 +
 +PostgreSQL tuning
 +=================
 +
 +* Do a ``VACUUM`` command periodically to tune your database.
 +
 +* Increase ``shared_buffers`` and ``sort_mem`` memory settings.
 +
 +* If web server and database is on the same unix host, use unix sockets
 +  instead of network connections for database access.
 +
 +
 +MySQL tuning
 +============
 +
 +* If web server and database is on the same unix host, use unix sockets
 +  instead of network connections for database access.
 +
 +* Enable mysql query cache if you have sufficient RAM.  Edit your ``my.cnf``
 +  file and add the following to the ``[mysqld]`` section (change the memory
 +  size to meet your needs)::
 +
 +    set-variable = query_cache_size=128M
 +
 +
 +Horde tuning
 +============
 +
 +Autoloading
 +-----------
 +
 +* Horde automatically loads PHP source files on demand which relies on the PHP
 +  autoloading feature introduced with PHP 5 and the Horde Autoloader library.
 +  Both allow to limit the set of source code files pulled into the system to
 +  the minimal amount required to answer the current request. This saves memory
 +  and time but at the same time the Autoloader library has to map each class
 +  name to the path of the corresponding PHP file that holds the class
 +  definition. This procedure is expensive and can slow the system down.
 +  Fortunately the mapping is fixed unless files are added or removed which
 +  usually only happens during an upgrade.
 +
 +  Thus Autoloading is amenable to caching and an easy way to improve the
 +  performance of the Horde Autoloader library, is to install the Autoloader
 +  Cache extension::
 +
 +    pear install horde/horde_autoloader_cache
 +
 +  This library is not installed by default because it will unconditionally use
 +  any of the following cache backends and does not allow for any further
 +  configuration: `Alternative PHP Cache`_, XCache_, eAccelerator_, or the local
 +  temporary filesystem.
 +
 +  It also doesn't detect the rare case when the file paths of any PHP class in
 +  Horde changes. In this case you either need to use the provided script to
 +  empty the cache::
 +
 +     horde-autoloader-cache-prune
 +
 +  or empty the cache manually, e.g. by restarting the web server or deleting
 +  the cache file from the temporary directory.
 +
 +VFS
 +---
 +
 +* Try to avoid using a SQL backend for VFS. Many databases require binary data
 +  to be heavily escaped, resulting in storage sizes that are many times
 +  greater than the actual size of the data. File system VFS will normally
 +  provide much improved performance.
 +
 +
 +Application tuning
 +==================
 +
 +* Some applications contain advanced features that might have a certain impact
 +  on the performance.  These features can usually be turned off in the
 +  application's configuration and are explicitly described as being a
 +  performance hit in the configuration web frontend.
 +</file>
 +
 +===== Konfiguration =====
 +==== PHP Einstellungen ====
 +Gemäß den Angaben in der Installationsdokumentation //**[[http://www.horde.org/apps/horde/docs/INSTALL|/usr/share/doc/pear/horde/INSTALL]]**// passen wir nun noch den Wert **session.gc_divisor** in der PHP-Konfigurationsdatei //**/etc/php.ini**// an:
 +
 +   # vim /etc/php.ini
 +<code php /etc/php.ini>...
 +
 +; Django : 2010-09-15
 +; default: session.gc_divisor = 1000
 +; PHP automatically garbage collects old session information, as long as this setting 
 +; (and session.gc_probability) are set to non-zero. It is recommended that this value 
 +; be "10000" or higher (see /usr/share/doc/pear/horde/INSTALL).
 +session.gc_divisor = 10000
 +
 +...
 +</code>
 +
 +Den Hinweisen aus der Sicherheitsdokumentation //**[[http://www.horde.org/apps/horde/docs/SECURITY#hiding-php-info-from-the-user|/usr/share/doc/pear/horde/SECURITY]]**// entsprechend kontrollieren wir die Einstellungen in der PHP-Konfigurationsdatei //**/etc/php.ini**// und passen den Parameter **expose_php**an.
 +   # vim /etc/php.ini
 +<code php /etc/php.ini>...
 +
 +; Decides whether PHP may expose the fact that it is installed on the server
 +; (e.g. by adding its signature to the Web server header).  It is no security
 +; threat in any way, but it makes it possible to determine whether you use PHP
 +; on your server or not.
 +; http://php.net/expose-php
 +; Django : 2014-09-19
 +;          horde's security hints: http://www.horde.org/apps/horde/docs/SECURITY#hiding-php-info-from-the-user
 +; default: expose_php = On
 +expose_php = Off
 +
 +...
 +</code>
 +
 +Zur Aktivierung der Anpassungen führen wir einen Reload des Apache-Daemon durch.
 +   # systemctl reload httpd.service
 +
 +===== Apache vHost =====
 +==== vHost Definition ====
 +Für unsere WEB-Applikation richten wir uns nun einen geeigneten **[[centos:web_c7:apache_2|SSL-Name Based Virtual Host]]** ein. 
 +Im Konfigurationsverzeichnis unseres [[centos:web_c7:apache_1|Apache-Webservers 2.4]] legen wir uns eine neue vHOST-Konfigurationsdatei an.
 +   # vim /etc/httpd/conf.d/vhost_443_horde.conf
 +
 +<file apache /etc/httpd/conf.d/vhost_443_horde.conf>#
 +# horde.sec-mail.guru (Horde Groupware Version 5)
 +#
 +<VirtualHost *:80>
 +        ServerAdmin webmaster@nausch.org
 +        ServerName horde.sec-mail.guru
 +        ServerAlias xn--bro-hoa.sec-mail.guru
 +        ServerPath /
 +
 +        <Location />
 +                Options -Indexes +FollowSymLinks
 +                Require all granted
 +        </Location>
 +
 +        RewriteEngine on
 +        RewriteCond %{HTTPS} off
 +        RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
 +
 +        DirectoryIndex index.php
 +
 +        ErrorLog logs/horde_error.log
 +        CustomLog logs/horde_access.log combined
 +</VirtualHost>
 +<VirtualHost *:443>
 +        ServerAdmin webmaster@nausch.org
 +        ServerName horde.sec-mail.guru
 +        ServerAlias xn--bro-hoa.sec-mail.guru
 +        ServerPath /
 +        DocumentRoot "/usr/share/horde"
 +
 +        <IfModule mod_ssl.c>
 +                SSLEngine on
 +                SSLProtocol -ALL +SSLv3 +TLSv1
 +                SSLCipherSuite EECDH+AES256:DHE+AES256:EECDH+AES:EDH+AES:-SHA1:EECDH+RC4:EDH+RC4:RC4-SHA:AES256-SHA:!aNULL:!eNULL:!EXP:!LOW:!MD5
 +                SSLHonorCipherOrder on
 +                SSLCertificateFile /etc/pki/tls/certs/wildcard.sec-mail.guru.certificate_140920.pem
 +                SSLCertificateKeyFile /etc/pki/tls/private/wildcard.sec-mail.guru.serverkey.pem
 +                SSLCertificateChainFile /etc/pki/tls/certs/CAcert_certificate-chain.pem
 +
 +        </IfModule>
 +
 +        <IfModule mod_gnutls.c>
 +                GnuTLSEnable on
 +                GnuTLSPriorities SECURE:!MD5
 +#               #GnuTLSPriorities NONE:+AES-128-CBC:+3DES-CBC:+ARCFOUR-128:+RSA:+DHE-RSA:+DHE-DSS:+SHA1:!MD5:+COMP-NULL
 +                GnuTLSCertificateFile /etc/pki/tls/certs/horde.sec-mail.guru.certificate_140912.pem
 +                GnuTLSKeyFile /etc/pki/tls/private/horde.sec-mail.guru.serverkey.pem
 +        </IfModule>
 +
 +        <IfModule mod_deflate.c>
 +                AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css text/javascript
 +                AddOutputFilterByType DEFLATE application/javascript application/x-javascriptl
 +                <Location />
 +                        <IfModule mod_setenvif.c>
 +                                SetOutputFilter DEFLATE
 +                                BrowserMatch ^Mozilla/4 gzip-only-text/html
 +                                BrowserMatch ^Mozilla/4\.0[678] no-gzip
 +                                BrowserMatch \bMSIE !no-gzip !gzip-only-text/html
 +                                SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary
 +                        </IfModule>
 +                        <IfModule mod_headers.c>
 +                                Header append Vary User-Agent env=!dont-vary
 +                        </IfModule>
 +                </Location>
 +        </IfModule>
 +
 +
 +        AddType application/x-httpd-php .php
 +
 +        # Link to system Javascript Libraries
 +        Alias /horde/js/scriptaculous     /usr/share/scriptaculous
 +        Alias /horde/js/prototype.js      /usr/share/prototype/prototype.js
 +        Alias /horde/js/syntaxhighlighter /usr/share/syntaxhighlighter
 +
 +        # Link to Micro$oft stuff
 +        Alias /Microsoft-Server-ActiveSync /usr/share/horde/rpc.php
 +        Alias /autodiscover/autodiscover.xml /usr/share/horde/rpc.php
 +
 +        <Directory /usr/share/horde/>
 +                # **IMPORTANT** By default, everyone accessing Horde is automatically logged
 +                # in as 'Administrator'. This is a security risk! It is very important that 
 +                # you change the authentication backend under the 'Authentication' tab. 
 +                # For this reason, Horde is currently only accessible from localhost. 
 +                <IfModule mod_authz_core.c>
 +                #       Zugriff nur vom Host vml000010.dmz.nausch.org aus erlauben
 +                #       Require host vml000010.dmz.nausch.org
 +                #       Zugriff generell erlauben
 +                        Require all granted
 +                </IfModule>
 +
 +                # Django : 2014-09-19
 +                # aus der Konfigurationsdatei php-horde-kronolith.conf übernommen
 +                <IfModule mod_rewrite.c>
 +                        RewriteEngine On
 +                        RewriteBase   /horde/
 +                        RewriteCond   %{REQUEST_FILENAME}  !-d
 +                        RewriteCond   %{REQUEST_FILENAME}  !-f
 +                        RewriteRule ^(.*)$ rampage.php [QSA,L]
 +                </IfModule>
 +
 +                Options +FollowSymLinks
 +                #Options All
 +                #AllowOverride All
 +
 +                # Rewrite the requestet URI, when it is with german "Umlaute".
 +                RewriteEngine On
 +                RewriteCond %{REQUEST_URI} ^/$
 +                RewriteCond %{HTTP_HOST} ^xn--bro-hoa.sec-mail.guru$ [NC]
 +                RewriteRule ^$ https://horde.sec-mail.guru [L,R=301]
 +
 +                # Exclude file from password protection
 +                SetEnvIf Request_URI "(rpc.php)$"  allow
 +                SetEnvIf Request_URI "(rpc.php/turba/mailsystem/)$"  allow
 +                SetEnvIf Request_URI "(rpc.php/nag/mailsystem/)$" allow
 +                SetEnvIf Request_URI "(sapi/profile/client)$"  allow
 +                SetEnvIf Request_URI "(devinfo)$"  allow
 +                SetEnvIf Request_URI "(Microsoft-Server-ActiveSync)$"  allow
 +
 +                # ActiveSync
 +                RewriteEngine On
 +                RewriteRule ^/Microsoft-Server-ActiveSync /rpc.php [PT,L,QSA]
 +                RewriteRule .* - [E=HTTP_MS_ASPROTOCOLVERSION:%{HTTP:Ms-Asprotocolversion}]
 +                RewriteRule .* - [E=HTTP_X_MS_POLICYKEY:%{HTTP:X-Ms-Policykey}]
 +                RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]
 +        </Directory>
 +
 +        # Deny access to the test.php files except from localhost
 +        <Files "test.php">
 +                # Django : 2014-09-19
 +                #          Zugriff generell verbieten
 +                #          Require all denied
 +                #          Zugriff nur vom Host vml000010.dmz.nausch.org aus erlauben
 +                Require host vml000010.dmz.nausch.org
 +        </Files>
 +
 +        # Those directories should not be viewed by Web clients.
 +        <DirectoryMatch /usr/share/horde/(ansel|imp|ingo|kronolith|mnemo|nag|sesha|trean|turba|passwd|wicked)/(config|lib|locale|scripts|templates)>
 +                Require all denied
 +        </DirectoryMatch>
 +        <DirectoryMatch /usr/share/horde/(config|lib|locale|templates|scripts)>
 +                Require all denied
 +        </DirectoryMatch>
 +
 +
 +        <Directory /usr/share/horde/rpc>
 +                <IfModule mod_rewrite.c>
 +                        RewriteEngine On
 +                        RewriteCond   %{REQUEST_FILENAME}  !-d
 +                        RewriteCond   %{REQUEST_FILENAME}  !-f
 +                        RewriteRule   ^(.*)$ index.php/$1 [QSA,L]
 +                </IfModule>
 +        </Directory>
 +
 +        # Django : 2014-09-19
 +        # aus der Konfigurationsdatei php-horde-content.conf übernommen 
 +        <Directory /usr/share/horde/content>
 +                <IfModule mod_rewrite.c>
 +                        RewriteEngine On
 +                        RewriteCond   %{REQUEST_FILENAME}  !-d
 +                        RewriteCond   %{REQUEST_FILENAME}  !-f
 +                        RewriteRule ^(.*)$ index.php [QSA,L]
 +                </IfModule>
 +        </Directory>
 +
 +        # Django : 2014-09-19
 +        # aus der Konfigurationsdatei php-horde-kronolith.conf übernommen
 +        <Directory /usr/share/horde/kronolith/feed/>
 +                <IfModule mod_rewrite.c>
 +                        RewriteEngine On
 +                        RewriteCond   %{REQUEST_FILENAME}  !-d
 +                        RewriteCond   %{REQUEST_FILENAME}  !-f
 +                        RewriteRule   ^(.*)$ index.php?c=$1 [QSA,L]
 +                </IfModule>
 +        </Directory>
 +
 +        DirectoryIndex index.php
 +        ErrorLog logs/horde_error.log
 +        CustomLog logs/horde_access.log combined
 +</VirtualHost>
 +</file>
 +
 +<WRAP round important>**Wichtig:**
 +
 +Solange wir unseren vHost noch nicht in der Produktionsumgebung steht und fertig konfiguriert wurde, beschränken wir den Zugriff auf den vHost noch. Hierzu tragen wir in der **Directive //Directory//** folgendes ein:
 +<code apache>...
 +                <IfModule mod_authz_core.c>
 +                        # Access-stuff (Zugriff von überall erlauben.)
 +                #Require all granted
 +                        # Access-stuff (Zugriff nur vom Admin-Netz aus!)
 + Require host nausch.org
 +                </IfModule>
 +...
 +</code>
 +Nach erfolgter Konfiguration, geben wir dann den Zugriff für alle frei.
 +<code apache>...
 +                <IfModule mod_authz_core.c>
 +                        # Access-stuff (Zugriff von überall erlauben.)
 +                Require all granted
 +                        # Access-stuff (Zugriff nur vom Admin-Netz aus!)
 + #Require host nausch.org
 +                </IfModule>
 +...
 +</code>
 +</WRAP>
 +
 +==== Konfiguration aktivieren ====
 +Bevor unseren Webserver starten, damit der neue vHost auch bedient werden kann, überprüfen wir die Konfiguration noch auf syntaktische Fehler.
 +   # apachectl -t
 +
 +   Syntax OK
 +
 +Abschließend führen wir einen Reload sdes Daemon durch.
 +   # systemctl reload httpd.service
 +
 +Bei Bedarf können wir auch den Status des Apche Webservers abfragen.
 +   # systemctl status httpd.service
 +
 +<code>httpd.service - The Apache HTTP Server
 +   Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled)
 +   Active: active (running) since Tue 2014-09-09 18:26:47 CEST; 1 day 15h ago
 +  Process: 20019 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=0/SUCCESS)
 +  Process: 22718 ExecReload=/usr/sbin/httpd $OPTIONS -k graceful (code=exited, status=0/SUCCESS)
 + Main PID: 20024 (httpd)
 +   Status: "Total requests: 0; Current requests/sec: 0; Current traffic:   0 B/sec"
 +   CGroup: /system.slice/httpd.service
 +           ├─20024 /usr/sbin/httpd -DFOREGROUND
 +           ├─22721 /usr/sbin/httpd -DFOREGROUND
 +           ├─22722 /usr/sbin/httpd -DFOREGROUND
 +           ├─22723 /usr/sbin/httpd -DFOREGROUND
 +           ├─22724 /usr/sbin/httpd -DFOREGROUND
 +           └─22725 /usr/sbin/httpd -DFOREGROUND
 +
 +Sep 10 19:45:20 vml000097.dmz.nausch.org systemd[1]: Reloading The Apache HTTP Server.
 +Sep 10 19:45:21 vml000097.dmz.nausch.org systemd[1]: Reloaded The Apache HTTP Server.
 +</code>
 +
 +
 +
 +===== mySQL Datenbank =====
 +Ein Großteil der Benutzer-Konfigurationsdaten werden in einer **[[centos:mysql|mySQL-Datenbank]]** /* FIXME */ gespeichert und vorgehalten. 
 +
 +==== Datenbank anlegen ====
 +Diese **[[centos:mysql|mySQL-Datenbank]]** /* FIXME */ und der zugehörige Datenbankuser werden wird nun im ersten Schritt anlegen.
 +
 +Wir melden uns also als berechtigter Datenbankuser an der mySQL-Datenbank an.
 +    # mysql -h mysql.dmz.nausch.org -u root -p
 +
 +<code>Enter password: 
 +Welcome to the MySQL monitor.  Commands end with ; or \g.
 +Your MySQL connection id is 217075
 +Server version: 5.1.73 Source distribution
 +
 +Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
 +
 +Oracle is a registered trademark of Oracle Corporation and/or its
 +affiliates. Other names may be trademarks of their respective
 +owners.
 +
 +Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
 +
 +mysql>
 +</code>
 +Dort legen wir als aller erst einmal eine Datenbank mit dem Namen **horde** an.
 +   mysql> create database horde5;
 +
 +   Query OK, 1 row affected (0.00 sec)
 +
 +==== Datenbankuser anlegen ====
 +Anschließend legen wir uns einen Datenbankuser an, denen wir entsprechende Rechte an der, gerade angelegten Datenbank **horde** einräumen. Als Namen nehme wir einfach **hode_admin_user**.
 +
 +   mysql> CREATE USER 'horde_admin_user'@'10.0.0.97' IDENTIFIED BY 'rbgsDK39DeM2b2btx9iMHfzd';
 +
 +   Query OK, 0 rows affected (0.00 sec)
 +
 +und
 +   mysql> CREATE USER 'horde_admin_user'@'vml000097.dmz.nausch.org' IDENTIFIED BY 'rbgsDK39DeM2b2btx9iMHfzd';
 +
 +   Query OK, 0 rows affected (0.00 sec)
 +
 +==== Nutzerberechtigungen setzen ====
 +Dem gerade angelebtem Datenbankuser für **[[http://horde.org|Horde]]** gewähren wir nun die nötigen Rechte, damit dieser vom Webserver aus, Tabellen anlegen, befüllen und verändern darf.
 +   mysql> GRANT ALL PRIVILEGES ON horde5.* TO 'horde_admin_user'@'10.0.0.97' IDENTIFIED BY 'rbgsDKMS39DeM2b2btx9iMHfzd' WITH GRANT OPTION MAX_QUERIES_PER_HOUR 0 MAX_CONNECTIONS_PER_HOUR 0 MAX_UPDATES_PER_HOUR 0 MAX_USER_CONNECTIONS 0;
 +
 +
 +   Query OK, 0 rows affected (0.00 sec)
 +
 +und
 +   mysql> GRANT ALL PRIVILEGES ON horde5.* TO 'horde_admin_user'@'vml000097.dmz.nausch.org' IDENTIFIED BY 'rbgsDKMS39DeM2b2btx9iMHfzd' WITH GRANT OPTION MAX_QUERIES_PER_HOUR 0 MAX_CONNECTIONS_PER_HOUR 0 MAX_UPDATES_PER_HOUR 0 MAX_USER_CONNECTIONS 0;
 +
 +   Query OK, 0 rows affected (0.00 sec) 
 +
 +==== Nutzerberechtigungen zuweisen ====
 +Zum Ende unserer mySQL-Userkonfiguration weisen wir unserem Nutzer die Berechtigungen zu.
 +   mysql> FLUSH PRIVILEGES;
 +
 +   Query OK, 0 rows affected (0.00 sec)
 +
 +Wir können uns nun vom Datenbank-Server wieder abmelden.
 +   mysql> quit
 +
 +   Bye
 +
 +==== Zugriff testen ====
 +Als nächstes überprüfen wir, ob der zuvor angelegt User/Zugang vom WEB-Server aus auch funktioniert. 
 +     # mysql -D horde5 -h mysql.dmz.nausch.org -u horde_admin_user -p
 +<code>Enter password: 
 +Welcome to the MariaDB monitor.  Commands end with ; or \g.
 +Your MySQL connection id is 217265
 +Server version: 5.1.73 Source distribution
 +
 +Copyright (c) 2000, 2014, Oracle, Monty Program Ab and others.
 +
 +Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
 +
 +MySQL [horde5]>
 +</code>
 +Die Verbindung klappt schon mal, daher lassen wir uns mal ansehen, welche Datenbanken der administrative Horde-User sehen kann.
 +
 +   
 +MySQL [horde5]> show databases;
 +<code>+--------------------+
 +| Database           |
 ++--------------------+
 +| information_schema |
 +| horde5             |
 ++--------------------+
 +2 rows in set (0.01 sec)
 +
 +MySQL [horde5]>
 +</code>
 +Auch dieser Test fiel positiv aus, wir können uns daher die Verbindung zum Datenbank-Server beenden und uns der weiteren konfiguration widmen.
 +   MySQL [horde5]> quit
 +
 +   Bye
 +
 +===== weitere Schritte zur Einrichtung =====
 +Nach der erfolgreichen Einrichtung des [[centos:mail_c7:horde_1?&#apache_vhost|Apache vHosts]] und der [[centos:mail_c7:horde_1?&#mysql_datenbank|Datenbankanbindung und -einrichtung]], können wir uns nun mit der Konfiguration des Frameworks Horde 5 unter CentOS 7 sowie der [[centos:mail_c7:start?&#horde_5_groupware_-_anwendungen_unter_centos_7x|Einrichtung einzelner Applikationen]] beschäftigen. 
 +
 +====== Links ======
 +  * **⇒ [[centos:mail_c7:horde_2|Weiter zum Kapitel "Basiskonfiguration des Frameworks Horde 5 unter CentOS 7.x"]]**
 +  * **[[centos:mail_c7:start|Zurück zum Kapitel >>Mailserverinstallation unter CentOS 7<<]]**
 +  * **[[wiki:start|Zurück zu >>Projekte und Themenkapitel<<]]**
 +  * **[[http://dokuwiki.nausch.org/doku.php/|Zurück zur Startseite]]**
 +
  
  • centos/mail_c7/horde_1.1410421276.txt.gz
  • Zuletzt geändert: 11.09.2014 07:41.
  • von django