#         User to run under (must be same as amavisd daemon)
AMAVIS_USER=amavis                                          

#         Set working directory (default /var/amavis).
# Django : 2014-11-21                                 
# default: WORKING_DIRECTORY=/var/spool/amavisd
WORKING_DIRECTORY=/var/spool/amavisd/tmp

#         Communication socket between sendmail and amavisd-milter (default
#         /var/amavis/amavisd-milter.sock).  The protocol spoken over this
#         socket is MILTER (Mail FILTER).  It must agree with the
#         INPUT_MAIL_FILTER entry in sendmail.mc
#         The socket should be in "proto:address" format:
#         o   {unix|local}:/path/to/file - A named pipe.
#         o   inet:port@{hostname|ip-address} - An IPV4 socket.
#         o   inet6:port@{hostname|ip-address} - An IPV6 socket.
# Django : 2014-11-18
# default: SOCKET=/var/run/amavisd/amavisd-milter.sock
SOCKET=inet:8899@10.0.0.67

#         Communication socket between amavisd-milter and amavisd-new
#         (default /var/amavis/amavisd.sock). It must agree with the
#         $unix_socketname entry in amavisd.conf
#         The socket should be in "proto:address" format:
#         o   {unix|local}:/path/to/file - A named pipe.
#         o   inet:port@{hostname|ip-address} - An IPV4 socket.
#         o   inet6:port@{hostname|ip-address} - An IPV6 socket.
AMAVISD_SOCKET=/var/spool/amavisd/amavisd.sock

#         Use this pid file (default /var/amavis/amavisd-milter.pid).
#         Better to create /var/run/amavis and put it there
#PID_FILE=/var/run/amavisd/amavisd-milter.pid

#         Maximum concurrent amavisd connections (default 0 - unlimited
#         number of connections).  It must agree with the $max_servers
#         entry in amavisd.conf.
MAX_CONNECTIONS=5

#         Maximum wait for connection to amavisd in seconds (default 300 =
#         5 minutes).  It must be less then sending MTA timeout for a
#         response to the final "."  that terminates a message on sending
#         MTA.  sendmail has default value 1 hour, postfix 10 minutes and
#         qmail 20 minutes.  We suggest to use less than 10 minutes.
MAX_WAIT=300

#         sendmail connection timeout in seconds (default 600 = 10 min-
#         utes).  It must agree with the INPUT_MAIL_FILTER entry in send-
#         mail.mc and must be greater than or equal to the amavisd-new con-
#         nection timeout.  When you use other milters (especially time-
#         consuming), the timeout must be sufficient to process message in
#         all milters.
MAILDAEMON_TIMEOUT=600

#         amavisd-new connection timeout in seconds (default 600 = 10 min-
#         utes).  This timeout must be sufficient for message processing in
#         amavisd-new.  It's usually a good idea to adjust them to the same
#         value as sendmail connection timeout.
AMAVISD_TIMEOUT=600