#************************************************************************# #* sksconf.typical - Typical configuration settings for a SKS server *# #* *# #* Copyright (C) 2011, 2012, 2013 John Clizbe *# #* *# #* This file is part of SKS. SKS is free software; you can *# #* redistribute it and/or modify it under the terms of the GNU General *# #* Public License as published by the Free Software Foundation; either *# #* version 2 of the License, or (at your option) any later version. *# #* *# #* This program is distributed in the hope that it will be useful, but *# #* WITHOUT ANY WARRANTY; without even the implied warranty of *# #* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *# #* General Public License for more details. *# #* *# #* You should have received a copy of the GNU General Public License *# #* along with this program; if not, write to the Free Software *# #* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *# #* USA or see . *# #************************************************************************# # sksconf -- SKS main configuration # # Django : 2015-07-08 # default: basedir: /srv/sks basedir: /var/lib/sks # debuglevel 3 is default (max. debuglevel is 10) debuglevel: 3 # Django : 2015-07-08 # default: hostname: keyserver.example.tld hostname: keyserver.nausch.org hkp_port: 11371 recon_port: 11370 # Django : 2015-07-08 # default: unset hkp_address: 127.0.0.1 # Django : 2015-07-08 # default: server_contact: 0xDECAFBADDEADBEEF server_contact: 0x074ECF6150A6BFED # Django : 2015-07-08 # default: from_addr: pgp-public-keys@example.tld from_addr: sks@keyserver.nausch.org sendmail_cmd: /usr/sbin/sendmail -t -oi # Django : 2015-07-08 # Runs database statistics calculation on boot initial_stat: # Django : 2015-07-08 # Maximum interval (in hours) at which membership file is reloaded membership_reload_interval: 1 # Django : 2015-07-08 # Hour at which to run database statistics. # default: stat_hour: 17 stat_hour: 0 # Django: 2015-07-08 # Have the HKP interface listen on port 80, as well as the hkp_port. #use_port_80 # set DB file pagesize as recommended by db_tuner # pagesize is (n * 512) bytes # NOTE: These must be set _BEFORE_ [fast]build & pbuild and remain set # for the life of the database files. To change a value requires recreating # the database from a dump # # KDB/key 65536 pagesize: 128 # # KDB/keyid 32768 keyid_pagesize: 64 # # KDB/meta 512 meta_pagesize: 1 # KDB/subkeyid 65536 subkeyid_pagesize: 128 # # KDB/time 65536 time_pagesize: 128 # # KDB/tqueue 512 tqueue_pagesize: 1 # # KDB/word - db_tuner suggests 512 bytes. This locked the build process # Better to use a default of 8 (4096 bytes) for now #word_pagesize: 8 # # PTree/ptree 4096 ptree_pagesize: 8