Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Host based Intrusion Detection System mit AIDE unter Arch Linux
- e aktuelle und valide Datenbank für spätere Systemchecks zur Verfügung, was zu unzähligen false-positive ... aide 0.19-1 (Wed 09 Apr 2025 03:15:30 PM CET) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Downloa... -:--:-- 0 -> Found aide.conf -> Found aidecheck.service -> Found aidecheck.timer ==> Validating
- Einrichten eines DNS-Daemons auf Basis von ISC Bind unter Arch Linux
- /bin/mdig bind /usr/bin/named bind /usr/bin/named-checkconf bind /usr/bin/named-checkzone bind /usr/bin/named-compilezone bind /usr/bin/named-journalprint bind /usr/bin/named-nzd2nzf bind /usr/bin/named-rrchecker bind /usr/bin/nsec3hash bind /usr/bin/nslookup ... sr/include/isc/fips.h bind /usr/include/isc/formatcheck.h bind /usr/include/isc/fuzz.h bind /usr/include/
- Einrichten eines lokalen DNS-Resolvers mit Unbound unter Arch Linux
- dass die Daten authentifiziert wurden) * CD = **Checking Disabled** (nur DNSSEC; deaktiviert die Überpr... d exit. SEE ALSO unbound.conf(5), unbound-checkconf(8), nsd(8). AUTHOR Unbound developers... beginning of a line. The utility unbound-checkconf(8) can be used to check unbound.conf prior to usage. EXAMPLE An example config file is shown
- Nagios Exporter und Prometheus @linux:prometheus
- g the NRPE daemon, not the host # from which the check_nrpe client is being executed. # ################... orted. # # Note: The daemon only does rudimentary checking of the client's IP # address. I would highly ... far the most secure method of using NRPE command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10 command[check_load]=/usr/lib64/nagios/plugins/ch
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen
- ecified or zero, the value will not be checked. The fourth argument is the interval specified in seconds in which the check is repeated. The interval is 10 seconds ... for GNU tar). NTP access accheck address This command allows you to check whether client NTP access is allowed from a particul
- Bau eines Freifunk-Offloaders auf Basis eines Raspberry 4B @linux:ansible
- │ │ ├── brokerinform.yml │ │ ├── checkup.yml │ │ ├── configuration.yml │ │... mplates │ │ ├── broker.j2 │ │ ├── checkup.j2 │ │ ├── crontab.j2 │ │ ├── r... .yml # RADV-Filter setzen - include: checkup.yml # Wireguard überprüfen ...... file> <file c++ ~/ansible/roles/wireguard/tasks/checkup.yml>--- - name: "Lokale link-local IPv6 Adress
- TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
- **''ssh''** mit den Optionen **''-o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null''** auf, bz... gen bei meinen Hosts: <code>Host * StrictHostKeyChecking=no UserKnownHostsFile=/dev/null</code> Probl... ssed to the master process. Valid commands are: “check” (check that the master process is running), “forward” (request forwardings without comma
- Router Advertisements mit radvd unter Arch Linux einrichten und nutzen
- ] device (enp0s25): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed') Jun 2... 19602499.4330] device (enp0s25): state change: ip-check -> secondaries (reason 'none', sys-iface-state: '... ├── install.yml │ ├── main.yml │ └── variablencheck.yml ├── templates │ ├── radvd_both_config.j2 │ ... lediglich auf die eigentlichen Tasks **''variablencheck''**, **''install.yml''** und **''firewalld.yml''*
- Ansible @linux:ansible
- sk-vault-pass ask for vault password -C, --check don't make any changes; instead, try to... differences in those files; works great with --check -e EXTRA_VARS, --extra-vars=EXTRA_VARS ... time: confirm each task before running --syntax-check perform a syntax check on the playbook, but do not execute it -t TAGS,
- Ansible - einfaches Playbook-Beispiel: Bedingtes Kopieren @linux:ansible
- nausch.org/7/os/$basearch priority=5 enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/MAILSERVER.GURU-... org/7/testing/$basearch/ #priority=5 enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/MAILSERVER.GURU-... nausch.org/8/os/$basearch priority=5 enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/MAILSERVER.GURU-... org/8/testing/$basearch/ #priority=5 enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/MAILSERVER.GURU-
- DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen
- ser.h kea /usr/include/kea/dhcpsrv/parsers/sanity_checks_parser.h kea /usr/include/kea/dhcpsrv/parsers/sh... rce_handler.h kea /usr/include/kea/dhcpsrv/sanity_checker.h kea /usr/include/kea/dhcpsrv/shared_network.h... dhcp_pgsql.so kea /usr/lib/kea/hooks/libdhcp_ping_check.so kea /usr/lib/kea/hooks/libdhcp_radius.so kea /... extended info saw 0 leases, extended info sanity checks modified 0 / updated 0 leases and 0 leases have
- Ansible-Lint: Die Fusselbürste @linux:ansible
- path relative to CWD -t TAGS only check rules whose id/tags match these values -T ... level (-vv for more) -x SKIP_LIST only check rules whose id/tags do not match these values -... [-s] [module...] DESCRIPTION ansible-lint checks Ansible playbooks for practices and behaviour th... -r flags are used -t TAGS only check rules whose id/tags match these values -T
- Erste Schritte Rund um Ansible @linux:ansible
- e/roles # uncomment this to disable SSH key host checking #host_key_checking = False # change the default callback, you can only have one 'stdout' type enabl... s. Setting works independently of the # host key checking setting above. #record_host_keys=False # by d... e/roles # uncomment this to disable SSH key host checking #host_key_checking = False # change the defau
- G&D StarSign Kryptographie USB Token S für ElsterAuthenticator unter Arch Linux
- 045656 Jun 20 17:56:43 pml010074 mtp-probe[4106]: checking bus 2, device 8: "/sys/devices/pci0000:00/0000... Card. Jun 20 17:56:43 pml010074 mtp-probe[4108]: checking bus 2, device 8: "/sys/devices/pci0000:00/0000... e=="linux64")'</code> <code>{ "bitness": 64, "checksum": "76b87916444fd09c621a7b96fcb74e472c87395095d... henticator_unix_60_0_0_x64.sh Für den Integritätscheck generieren wir uns die SHA256-Checksumme: $ sh
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- name: chrony state: latest - name: Check if /etc/chrony.orig does exists stat: ... font><br> <font style="color: rgb(0, 0, 0)">TASK [Check if /etc/chrony.orig does exists] ****************... nged: [www8.dmz.nausch.org] => {"changed": true, "checksum": "89175e7c294dedf12bd473a952014e2cefd5766d", ... nged: [www8.dmz.nausch.org] => {"changed": true, "checksum": "37539ecdd11393937e5596894db41a02c6121c5f",