Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Arch Linux - (manuelle) Minimalinstallation @arch
- le bash /etc/default/grub>... # GRUB boot loader configuration GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=
- TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
- specified on a per-host basis in a configuration file. Agent forwarding should be ... be set on a host-by-host basis in the configuration files; see the Compression option in ssh_config(5... ngs can also be speci‐ fied in the configuration file. IPv6 addresses can be speci... Specifies an alternative per-user configuration file. If a configuration file is given on the co
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- ured with the cmdallow directive in the chronyd's configuration file or the cmdallow command in chronyc. B... lent to being able to modify the chronyd's configuration file and restart it. OPTIONS -4 ... NTP sources that were specified in the configuration file, or chronyc commands. Without the -n and -N ... nyc, or the local directive in the configuration file). The reference ID is printe
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible
- ear in the 'dead' and 'stoned' modes. Any configuration done by -e and -T will be lost if one of the prov
- Dovecot, Nachrichten auf dem Server mit SIEVE filtern @centos:mail_c7
- onnections) #process_limit = 1024 #} # Service configuration protocol sieve { # Maximum ManageSieve command... = 5 # Refer to 90-sieve.conf for script quota configuration and configuration of # Sieve execution limits. } </file> ==== 90-sieve-extprograms.conf ==== Mit Hilfe der Da... sieve-extprograms.conf># Sieve Extprograms plugin configuration # Don't forget to add the sieve_extprograms plug
- DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen @linux
- ocs.io/en/latest/arm/dhcp4-srv.html#dhcpv4-server-configuration|8.2. DHCPv4 Server Configuration]]**. In unserer Betriebsumgebung haben wir folgende Rahmenbedingungen für uns... etc/kea/kea-dhcp4.conf | <code>// This is a basic configuration for the Kea DHCPv4 server. Subnet declarations //... ot listen or respond to any queries. // The basic configuration must be extended to specify interfaces on which /
- Ansible @linux:ansible
- ion : Ansible is a radically simple model-driven configuration management, multi-node deployment, and remote tas... the tool to run Ansible playbooks, which are a configuration and multinode deployment system. See the project ... on_added: 2.7 - conf_file The remote dnf configuration file to use for the transaction. [Default... fedoraproject.org/ansible Summary : SSH-based configuration management, deployment, and task execution system
- Fax-Server mit HylaFAX+ unter CentOS 6.x @centos
- address 10 Dez 12 9:30:40 elwms kernel: usb 3-1: configuration #2 chosen from 2 choices Dez 12 9:30:40 elwms ke... e Create the /etc/iaxmodem directory. The modem configuration files will be stored in here. With your favorite editor edit the prototype modem configuration file, iaxmodem-cfg.ttyIAX. Alter the configuration lines as needed and desired. The "device" entry is the full
- Fax-Server mit HylaFAX+ unter CentOS5 @voip:fax
- address 10 Nov 8 19:30:40 mnss kernel: usb 3-1: configuration #2 chosen from 2 choices Nov 8 19:30:42 mnss ker... /usr/bin/base64 Checking system for proper client configuration. Checking system for proper server configuration. ... ... There does not appear to be an entry for the FaxMaste... r/spool/hylafax/status/any.info. HylaFAX configuration parameters are: [1] Init script starts f
- SNMP (unter CentOS 6.x) @centos:cacti_c6
- ################## # # snmpd.conf: # An example configuration file for configuring the ucd-snmp snmpd agent. # ... nded to only be as a starting point. Many more # configuration directives exist than are mentioned in this file.... intended for you # to read. All other lines are configuration commands for the agent. ########################... # only access, if run out of the box without any configuration file in # place. The following examples show yo
- Cacti Installation und Grundkonfiguration unter CentOS 6.x @centos:cacti_c6
- unctions ; https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone = "Europe/Ber
- Root-Zertifikate und die Apple-Welt @centos:cacert
- t man zum [[https://theiphonewiki.com/wiki/IPhone_Configuration_Utility|iPCU]] im [[https://theiphonewiki.com/|iP
- ONEFORALL Universalfernbedienung URC 3741 Protecto für Video-Disk-Recorder (ya)VDR @vdr
- ra.nausch.org/admin/#settings-hw-remote|yaVDR Web Configuration Frontend]]** bei der einstellung der Fernbedienun
- Einrichten von Asterisk 14.x unter CentOS7 @voip:c7:asterisk14
- -- Show all files that have loaded a configuration file config reload -- Force a reload on modules using a particular configuration file config show help -- Show configuration help for a module core abort shutdown -- Ca... eload -- Reloads the DNS manager configuration dnsmgr status -- Display the DNS
- Asterisk-Repository einbinden @voip:asterisk18
- iver for Asterisk asterisk14-configs.i386 : Basic configuration files for Asterisk asterisk14-core.i386 : Asteris... dule for Asterisk asterisk16-configs.i386 : Basic configuration files for Asterisk asterisk16-core.i386 : Asteris... dule for Asterisk asterisk18-configs.i386 : Basic configuration files for Asterisk asterisk18-core.i386 : Asteris
- Ansible - erweiterte Konfigurationsbeispiele: Ansible-Controll-Node und SSH-Jumphosts @linux:ansible
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- phpMyAdmin 4.7 unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga