linux:ansible:ffmuc-rpb4-ol

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung		 Vorhergehende Überarbeitung
linux:ansible:ffmuc-rpb4-ol [27.09.2022 15:03. ] – [Templates] djangolinux:ansible:ffmuc-rpb4-ol [18.11.2024 18:58. ] (aktuell) – Externe Bearbeitung 127.0.0.1
Zeile 11: Zeile 11:
  
 ====== Inhalt ====== ====== Inhalt ======
- 
-<WRAP center round alert 30%> 
-**ACHTUNG:** Artikel in Überarbeitung!!! **ACHTUNG:** 
-</WRAP> 
- 
  
 <WRAP center round tip 90%> <WRAP center round tip 90%>
Zeile 896: Zeile 891:
 === Rolle "wireguard" === === Rolle "wireguard" ===
 == Tasks == == Tasks ==
-<file java ~/ansible/roles/wireguard/tasks/main.yml>--- # Installation und Konfiguration von WIREGUARD+<file c++ ~/ansible/roles/wireguard/tasks/main.yml>--- # Installation und Konfiguration von WIREGUARD
 - include: install.yml                  # Installation des wireguard-Paketes - include: install.yml                  # Installation des wireguard-Paketes
 - include: genkeys.yml                  # Schlüsselmaterial erzeugen - include: genkeys.yml                  # Schlüsselmaterial erzeugen
 - include: genlinklocal.yml             # lokale link-local IPv6 Adresse generieren - include: genlinklocal.yml             # lokale link-local IPv6 Adresse generieren
 - include: configuration.yml            # Konfigurationsdatei kopieren und anpassen - include: configuration.yml            # Konfigurationsdatei kopieren und anpassen
-- include: brokerinform.yml             # Public-Key unseres Nodes an den Broker übermitteln +- include: brokerinform.yml             # Public-Key unseres Nodes an den Broker übermitteln
 - include: wireguardstart.yml           # Aktivierung des wireguard client-daemon - include: wireguardstart.yml           # Aktivierung des wireguard client-daemon
 +- include: radv-filter.yml              # RADV-Filter setzen
 - include: checkup.yml                  # Wireguard überprüfen - include: checkup.yml                  # Wireguard überprüfen
-</file>+... # YML Ende</file>
  
-<file java ~/ansible/roles/wireguard/tasks/install.yml>--- 
-  - name: "*wireguard* : Installation von wireguard" 
-    # https://docs.ansible.com/ansible/latest/modules/apt_module.html 
-    apt:  
-      #update_cache: yes 
-      pkg: 
-       - wireguard 
-      state: present 
-</file> 
  
-<file java ~/ansible/roles/wireguard/tasks/genkeys.yml>--- +<file c++ ~/ansible/roles/wireguard/tasks/install.yml>---
-  - name: "*wireguard* : Schlüsselmaterial erstellen" +
-    # https://docs.ansible.com/ansible/latest/modules/shell_module.html +
-    shell: /usr/bin/wg genkey | tee client_private.key | wg pubkey | tee client_public.key  +
-    args: +
-      chdir: /etc/wireguard/ +
-      creates: client_private.key  +
  
-  - name: "*wireguard* : Zugriffsrechte des Private Keys anpassen" +- name: "Installation von wireguard und iptables" 
-    # https://docs.ansible.com/ansible/latest/modules/file_module.html +  ansible.builtin.apt: 
-    file:  +    pkg: 
-      path: /etc/wireguard/client_private.key +      - wireguard 
-      mode: '0600'+      - iptables 
 +    state: present
  
-  - name: "*wireguard* : Zugriffsrechte des Public Keys anpassen" +...</file>
-    # https://docs.ansible.com/ansible/latest/modules/file_module.html +
-    file:  +
-      path: /etc/wireguard/client_public.key +
-      mode: '0600' +
-</file>+
  
-<file java ~/ansible/roles/wireguard/tasks/genlinklocal.yml>--- 
-  - name: "*wireguard* : lokale link-local IPv6 Adresse aus dem PUBLIC-Key erzeugen" 
-    # https://docs.ansible.com/ansible/latest/modules/shell_module.html 
-    shell: cat /etc/wireguard/client_public.key | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/fe80::02\1:\2ff:fe\3:\4\5/' 
-    register: wg_node_linklocal 
-</file> 
  
-<file java ~/ansible/roles/wireguard/tasks/configuration.yml>--- +<file c++ ~/ansible/roles/wireguard/tasks/genkeys.yml>---
-  - name: "*wireguard* : private-key einlesen und in Variable übergeben" +
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/shell_module.html +
-    shell: cat /etc/wireguard/client_private.key +
-    register: wg_client_privatekey+
  
-  - name: "*wireguard* : public-key einlesen und in Variable übergeben" +- name: "Schlüsselmaterial erstellen" 
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/shell_module.html +  ansible.builtin.command: 
-    shell: cat /etc/wireguard/client_public.key +    cmd: /usr/bin/wg genkey | tee client_private.key | wg pubkey | tee client_public.key 
-    register: wg_client_publickey+  args: 
 +    chdir: /etc/wireguard/ 
 +    creates: client_private.key
  
-  - name: "*wireguard* : Socket ermitteln" +- name: "Zugriffsrechte des Private Keys anpassen" 
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/set_fact_module.html +  ansible.builtin.file: 
-    set_fact: +    path: /etc/wireguard/client_private.key 
-      ffmuc_wireguard_port: "{{ item.value }}" +    mode: '0600'
-    loop: "{{ lookup('dict', wireguard_ports) }}" +
-    when: "ffmuc_segment in item.key"+
  
-  - name: "*wireguard* : link-local des Gateways ermitteln" +- name: "Zugriffsrechte des Public Keys anpassen" 
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/set_fact_module.html +  ansible.builtin.file: 
-    set_fact: +    path: /etc/wireguard/client_public.key 
-      ffmuc_wireguard_linklocal: "{{ item.value }}" +    mode: '0600'
-    loop: "{{ lookup('dict', gw_linklocal) }}" +
-    when: "ffmuc_gateway in item.key"+
  
-  - name: "*wireguard* : publickey des Gateways ermitteln" +...</file>
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/set_fact_module.html +
-    set_fact: +
-      ffmuc_wireguard_gwpubkey: "{{ item.value }}" +
-    loop: "{{ lookup('dict', gw_publickey) }}" +
-    when: "ffmuc_gateway in item.key"+
  
-  - name: "*wireguard* : Konfigurationsdatei des wireguard-Tunnels erzeugen" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html 
-    template: 
-      src: templates/uplink.j2 
-      dest: /etc/wireguard/wg-uplink.conf 
-</file> 
  
-<file java ~/ansible/roles/wireguard/tasks/brokerinform.yml>--- +<file c++ ~/ansible/roles/wireguard/tasks/genlinklocal.yml>---
-  - name: "*wireguard* : systemd unit file für broker -Information anlegen"     +
-     # https://docs.ansible.com/ansible/latest/modules/template_module.html +
-    template: +
-      src: templates/broker.j2 +
-      dest: /etc/systemd/system/broker.service+
  
-  - name: "*wireguard* : Service broker starten beim Booten starten" +- name: "lokale link-local IPv6 Adresse aus dem PUBLIC-Key erzeugen" 
-    # https://docs.ansible.com/ansible/latest/modules/systemd_module.html +  ansible.builtin.shell: | 
-    systemd: +    cat /etc/wireguard/client_public.key | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/fe80::02\1:\2ff:fe\3:\4\5/' 
-      name: broker +  register: wg_node_linklocal 
-      daemon_reload: yes +  changed_when: false
-      state: started +
-      enabled: yes +
-</file>+
  
-<file java ~/ansible/roles/wireguard/tasks/wireguardstart.yml>--- +...</file>
-  - name: "*wireguard* : Service wireguard via systemd startem" +
-    # https://docs.ansible.com/ansible/latest/modules/systemd_module.html +
-    systemd: +
-      name: wg-quick@wg-uplink +
-      daemon_reload: yes +
-      state: started +
-      enabled: yes +
-</file>+
  
-<file java ~/ansible/roles/wireguard/tasks/checkup.yml>--- +<file c++ ~/ansible/roles/wireguard/tasks/configuration.yml>---
-  - name: "*wireguard* : lokale link-local IPv6 Adresse aus dem PUBLIC-Key erzeugen" +
-    # https://docs.ansible.com/ansible/latest/modules/shell_module.html +
-    shell: cat /etc/wireguard/client_public.key | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/fe80::02\1:\2ff:fe\3:\4\5/' +
-    register: wg_node_linklocal +
  
-  - name: "*wireguard* : checkupscript zum Testen der wireguard-Verbindung anlegen" +- name: "private-key einlesen und in Variable übergeben" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +  ansible.builtin.command: 
-    template: +    cmd: cat /etc/wireguard/client_private.key 
-      src: templates/checkup.j2 +  register: wg_client_privatekey 
-      dest: /usr/local/bin/checkup+  changed_when: false
  
-  - name: "*wireguard* : Ausführungsrechte des Bash-Scripts anpassen" +- name: "public-key einlesen und in Variable übergeben" 
-    # https://docs.ansible.com/ansible/latest/modules/file_module.html +  ansible.builtin.command: 
-    file: +    cmd: cat /etc/wireguard/client_public.key 
-      path: /usr/local/bin/checkup +  register: wg_client_publickey 
-      mode: '0740'+  changed_when: false
  
-  - name: "*wireguard* : crontab für minütlichen checkup der wireguard-Verbindung anlegen" +- name: "Socket ermitteln" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +  ansible.builtin.set_fact: 
-    template: +    ffmuc_wireguard_port: "{{ item.value }}" 
-      src: templates/crontab.j2 +  loop: "{{ lookup('dict', wireguard_ports) }}" 
-      dest: /etc/crontab +  when: "ffmuc_segment in item.key" 
- </file>+ 
 +- name: "link-local des Gateways ermitteln" 
 +  ansible.builtin.set_fact: 
 +    ffmuc_wireguard_linklocal: "{{ item.value }}" 
 +  loop: "{{ lookup('dict', gw_linklocal) }}" 
 +  when: "ffmuc_gateway in item.key" 
 + 
 +- name: "publickey des Gateways ermitteln" 
 +  ansible.builtin.set_fact: 
 +    ffmuc_wireguard_gwpubkey: "{{ item.value }}" 
 +  loop: "{{ lookup('dict', gw_publickey) }}" 
 +  when: "ffmuc_gateway in item.key" 
 + 
 +- name: "Konfigurationsdatei des wireguard-Tunnels erzeugen" 
 +  ansible.builtin.template: 
 +    src: templates/uplink.j2 
 +    dest: /etc/wireguard/wg-uplink.conf 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/wireguard/tasks/brokerinform.yml>--- 
 + 
 +- name: "systemd unit file für broker -Information anlegen" 
 +  ansible.builtin.template: 
 +    src: templates/broker.j2 
 +    dest: /etc/systemd/system/broker.service 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +- name: "Service broker starten beim Booten starten" 
 +  ansible.builtin.systemd: 
 +    name: broker 
 +    daemon_reload: true 
 +    state: started 
 +    enabled: true 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/wireguard/tasks/wireguardstart.yml>--- 
 + 
 +- name: "Service wireguard via systemd starten" 
 +  ansible.builtin.systemd: 
 +    name: wg-quick@wg-uplink 
 +    daemon_reload: true 
 +    state: started 
 +    enabled: true 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/wireguard/tasks/radv-filter.yml>--- 
 + 
 +- name: "Startsrcipt für der RADV-Filter anlegen" 
 +  template: 
 +    src: templates/radv-filter.j2 
 +    dest: /usr/local/bin/radv-filter 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/wireguard/tasks/checkup.yml>--- 
 + 
 +- name: "Lokale link-local IPv6 Adresse aus dem PUBLIC-Key erzeugen" 
 +  ansible.builtin.shell: | 
 +    cat /etc/wireguard/client_public.key | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/fe80::02\1:\2ff:fe\3:\4\5/' 
 +  register: wg_node_linklocal 
 +  changed_when: false 
 + 
 +- name: "checkupscript zum Testen der wireguard-Verbindung anlegen" 
 +  ansible.builtin.template: 
 +    src: templates/checkup.j2 
 +    dest: /usr/local/bin/checkup 
 +    owner: root 
 +    group: root 
 +    mode: '0750' 
 + 
 +- name: "Ausführungsrechte des Bash-Scripts anpassen" 
 +  ansible.builtin.file: 
 +    path: /usr/local/bin/checkup 
 +    mode: '0740' 
 + 
 +- name: "crontab für minütlichen checkup der wireguard-Verbindung anlegen" 
 +  ansible.builtin.template: 
 +    src: templates/crontab.j2 
 +    dest: /etc/crontab 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +...</file>
  
 == Templates == == Templates ==
-<file java ~/ansible/roles/wireguard/templates/broker.j2># Django : 2020-12-07+<file c++ ~/ansible/roles/wireguard/templates/broker.j2># Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
 [Unit] [Unit]
 # see man systemd.unit # see man systemd.unit
 Description=Inform tunnel about our wireguard-public key Description=Inform tunnel about our wireguard-public key
-Documentation=https://wiki.mailserver.guru/doku.php/centos:ansible:ffmuc-rpb4-ol+Documentation=https://dokuwiki.nausch.org/doku.php/centos:ansible:ffmuc-rpb4-ol
 Before=wg-quick.target Before=wg-quick.target
  
Zeile 1050: Zeile 1082:
 [Install] [Install]
 WantedBy=default.target WantedBy=default.target
 +
 </file> </file>
  
-<file java ~/ansible/roles/wireguard/templates/checkup.j2>#!/bin/bash+<file c++ ~/ansible/roles/wireguard/templates/checkup.j2>#!/bin/bash 
 +# Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
  
 # Check connectivity to supernode # Check connectivity to supernode
Zeile 1073: Zeile 1107:
         #logger -t checkuplink "wiregurad-tunnel is up an running : HTTP-statuscode: ${HTTP_STATUS_CODE}"         #logger -t checkuplink "wiregurad-tunnel is up an running : HTTP-statuscode: ${HTTP_STATUS_CODE}"
 fi fi
 +
 </file> </file>
  
-<file java ~/ansible/roles/wireguard/templates/crontab.j2># /etc/crontab: system-wide crontab+<file c++ ~/ansible/roles/wireguard/templates/crontab.j2># Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually! 
 +# /etc/crontab: system-wide crontab
 # Unlike any other crontab you don't have to run the `crontab' # Unlike any other crontab you don't have to run the `crontab'
 # command to install the new version when you edit this file # command to install the new version when you edit this file
Zeile 1083: Zeile 1119:
 SHELL=/bin/sh SHELL=/bin/sh
 PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
 +
 +MAILTO=""
  
 # Example of job definition: # Example of job definition:
Zeile 1092: Zeile 1130:
 # |  |  |  |  | # |  |  |  |  |
 # *  *  *  *  * user-name command to be executed # *  *  *  *  * user-name command to be executed
-17 * * * * root    cd / && run-parts --report /etc/cron.hourly +17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly 
-25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) +25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 
-47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) +47 6    * * 7   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 
-52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )+52 6    1 * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
 # #
  
 # check wireguard-connection # check wireguard-connection
-* * * * * root /usr/local/bin/checkup 2>&1 /dev/null+-* * * * *      root    /usr/local/bin/checkup 2>&1 /dev/null 
 + 
 +# set firewall-role for RA-Filter 
 +-* * * * *       root    /usr/local/bin/radv-filter 2>&1 /dev/null
 </file> </file>
  
-<file java ~/ansible/roles/wireguard/templates/uplink.j2>[Interface]+<file c++ ~/ansible/roles/wireguard/templates/uplink.j2>[Interface]
 PrivateKey = {{ wg_client_privatekey.stdout }} PrivateKey = {{ wg_client_privatekey.stdout }}
 Address = {{ wg_node_linklocal.stdout }} Address = {{ wg_node_linklocal.stdout }}
Zeile 1115: Zeile 1156:
  
 === Rolle "vxlan" === === Rolle "vxlan" ===
-<file java ~/ansible/roles/vxlan/tasks/main.yml>--- # Installation und Konfiguration von VXLAN+== Tasks == 
 +<file c++ ~/ansible/roles/vxlan/tasks/main.yml>--- # Installation und Konfiguration von VXLAN
 - include: configure.yml                # VXLAN Konfigurieren - include: configure.yml                # VXLAN Konfigurieren
 - include: vxlanstart.yml               # Aktivierung des wireguard client-daemon - include: vxlanstart.yml               # Aktivierung des wireguard client-daemon
-</file>+... # YML Ende</file>
  
-== Tasks == +<file c++ ~/ansible/roles/vxlan/tasks/configure.yml>---
-<file java ~/ansible/roles/vxlan/tasks/configure.yml>  - name: "*VXLAN* : Paketfilter anpassen - Eingehenden VXLAN Verkehr auf dem Mesh-Interface erlauben" +
-    # https://docs.ansible.com/ansible/latest/modules/commans_module.html +
-    command: ip6tables -I INPUT 1 -i wg-uplink -m udp -p udp --dport 8472 -j ACCEPT +
  
-  - name: "*VXLAN* : VXLAN-ID des gewählten Segments ermitteln" +- name: "Paketfilter anpassen - Eingehenden VXLAN Verkehr auf dem Mesh-Interface erlauben" 
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/set_fact_module.html +  ansible.builtin.command: | 
-    set_fact: +    ip6tables -I INPUT 1 -i wg-uplink -m udp -p udp --dport 8472 -j ACCEPT 
-      ffmuc_vxlan_id: "{{ item.value }}" +  changed_when: false
-    loop: "{{ lookup('dict', gw_vxlan_ids) }}" +
-    when: "ffmuc_segment in item.key"+
  
-  - name: "*VXLAN* : link-local des Gateways ermitteln" +- name: "VXLAN-ID des gewählten Segments ermitteln" 
-    # https://docs.ansible.com/ansible/latest/collections/ansible/builtin/set_fact_module.html +  ansible.builtin.set_fact: 
-    set_fact: +    ffmuc_vxlan_id: "{{ item.value }}" 
-      ffmuc_wireguard_linklocal: "{{ item.value }}" +  loop: "{{ lookup('dict', gw_vxlan_ids) }}" 
-    loop: "{{ lookup('dict', gw_linklocal) }}" +  when: "ffmuc_segment in item.key"
-    when: "ffmuc_gateway in item.key"+
  
-  - name: "*VXLAN* : lokale link-local IPv6 Adresse aus dem PUBLIC-Key erzeugen" +- name: "link-local des Gateways ermitteln" 
-    # https://docs.ansible.com/ansible/latest/modules/shell_module.html +  ansible.builtin.set_fact: 
-    shell: cat /etc/wireguard/client_public.key | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/fe80::02\1:\2ff:fe\3:\4\5/' +    ffmuc_wireguard_linklocal: "{{ item.value }}" 
-    register: wg_node_linklocal+  loop: "{{ lookup('dict', gw_linklocal) }}" 
 +  when: "ffmuc_gateway in item.key"
  
-  - name: "*VXLAN* : Startupdatei für VXLAN kopieren" +- name: "lokale link-local IPv6 Adresse aus dem PUBLIC-Key erzeugen" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +  ansible.builtin.shell: | 
-    template: +    cat /etc/wireguard/client_public.key | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/fe80::02\1:\2ff:fe\3:\4\5/' 
-      src: templates/vxlan-init.j2 +  register: wg_node_linklocal 
-      dest: /usr/local/bin/vxlan+  changed_when: false
  
-  - name: "*VXLAN* : Ausführungsrechte des Bash-Scripts anpassen" +- name: "Startupdatei für VXLAN kopieren" 
-    # https://docs.ansible.com/ansible/latest/modules/file_module.html +  template: 
-    file: +    src: templates/vxlan-init.j2 
-      path: /usr/local/bin/vxlan +    dest: /usr/local/bin/vxlan 
-      mode: '0740' +    owner: root 
-</file>+    group: root 
 +    mode: '0750'
  
-<file java ~/ansible/roles/vxlan/tasks/vxlanstart.yml>--- +...</file> 
-  - name: "*VXLAN* : systemd-unitfile anlegen" + 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html + 
-    template: +<file c++ ~/ansible/roles/vxlan/tasks/vxlanstart.yml>--- 
-      src: templates/systemd-service-file.j2 + 
-      dest: /etc/systemd/system/vxlan.service+- name: "systemd-unitfile anlegen" 
 +  ansible.builtin.template: 
 +    src: templates/systemd-service-file.j2 
 +    dest: /etc/systemd/system/vxlan.service 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +- name: "Neues Unitfile dem systemd bekannt geben" 
 +  ansible.builtin.systemd: 
 +    daemon_reload: true 
 + 
 +- name: "Service vxlan via systemd starten" 
 +  ansible.builtin.systemd: 
 +    name: vxlan.service 
 +    daemon_reload: true 
 +    state: started 
 +    enabled: true 
 + 
 +...</file>
  
-  - name: "*VXLAN* : Neues Unitfile dem systemd bekannt geben" 
-    # https://docs.ansible.com/ansible/latest/modules/systemd_module.html 
-    systemd: 
-      daemon_reexec: yes 
  
-  - name: "*VXLAN* : Service vxlan via systemd starten" 
-    # https://docs.ansible.com/ansible/latest/modules/systemd_module.html 
-    systemd: 
-      name: vxlan.service 
-      daemon_reload: yes 
-      state: started 
-      enabled: yes 
-</file> 
  
 == Templates == == Templates ==
-<file java ~/ansible/roles/vxlan/templates/systemd-service-file.j2>[Unit]+<file c++ ~/ansible/roles/vxlan/templates/systemd-service-file.j2># Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually! 
 +[Unit]
 # see man systemd.unit # see man systemd.unit
 Description=Bringing up VXLAN Interface Description=Bringing up VXLAN Interface
-Documentation=https://wiki.mailserver.guru/doku.php/centos:ansible:ffmuc-rpb4-ol+Documentation=https://dokuwiki.nausch.org/doku.php/centos:ansible:ffmuc-rpb4-ol
 After=wg-quick@wg-uplink.service After=wg-quick@wg-uplink.service
  
Zeile 1193: Zeile 1239:
  
 [Install] [Install]
-WantedBy=multi-user.target +WantedBy=multi-user.target</file> 
-</file>+
  
-<file bash ~/ansible/roles/vxlan/templates/vxlan-init.j2>#!/bin/bash+<file c++ ~/ansible/roles/vxlan/templates/vxlan-init.j2>#!/bin/bash 
 +# Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
  
 # Bring up VXLAN # Bring up VXLAN
Zeile 1208: Zeile 1255:
 /usr/sbin/batctl hardif mesh-vpn throughput_override 10000 /usr/sbin/batctl hardif mesh-vpn throughput_override 10000
 </file> </file>
- 
  
  
 === Rolle "ext-respondd" === === Rolle "ext-respondd" ===
 == Tasks == == Tasks ==
-<file java ~/ansible/roles/ext-respondd/tasks/main.yml>--- # Installation und Konfiguration des ext-respondd (Statistiken für https://map.ffmuc.net)+<file c++ ~/ansible/roles/ext-respondd/tasks/main.yml>--- # Installation und Konfiguration des ext-respondd (Statistiken für https://map.ffmuc.net)
 - include: gitinstall.yml               # Installation der Pakete git und python3-netifaces  - include: gitinstall.yml               # Installation der Pakete git und python3-netifaces 
 - include: gitclone.yml                 # Repo ext-respondd klonen  - include: gitclone.yml                 # Repo ext-respondd klonen 
Zeile 1222: Zeile 1268:
 </file> </file>
  
-<file java ~/ansible/roles/ext-respondd/tasks/aliasgenerate.yml>--- 
-  - name: "Erstellen der resondd Konfigurationsdatei alias.json" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html 
-    template:  
-      src: templates/ext-respondd_alias.json.j2 
-      dest: /opt/ext-respondd/alias.json 
-</file> 
  
-<file java ~/ansible/roles/ext-respondd/tasks/configgenerate.yml>--- +<file c++ ~/ansible/roles/ext-respondd/tasks/gitinstall.yml>---
-  - name: "Erstellen der resondd Konfigurationsdatei config.json" +
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +
-    template:  +
-      src: templates/ext-respondd_config.json.j2 +
-      dest: /opt/ext-respondd/config.json +
-</file>+
  
-<file java ~/ansible/roles/ext-respondd/tasks/copyconfig.yml>--- +- name: "Installation der Pakete git und python3-netifaces" 
-  - name: "Systemd Startdatei für respondd kopieren" +  ansible.builtin.apt: 
-    # https://docs.ansible.com/ansible/latest/modules/shell_module.html +    update_cache: true 
-    shell:  +    pkg: 
-      cmd: cp /opt/ext-respondd/ext-respondd.service.example /etc/systemd/system/ext-respondd.service +      - git 
-</file>+      - python3-netifaces 
 +    state: present
  
-<file java ~/ansible/roles/ext-respondd/tasks/gitclone.yml>--- +...</file>
-  - name: "Repo ext-respondd klonen" +
-    # https://docs.ansible.com/ansible/latest/modules/git_module.html +
-    git: +
-      repo: https://github.com/freifunkMUC/ext-respondd +
-      dest: /opt/ext-respondd/ +
-</file>+
  
-<file java ~/ansible/roles/ext-respondd/tasks/gitinstall.yml>--- 
-  - name: "Installation der Pakete git und python3-netifaces" 
-    # https://docs.ansible.com/ansible/latest/modules/apt_module.html 
-    apt:  
-      update_cache: yes 
-      pkg: 
-        - git 
-        - python3-netifaces 
-      state: present 
-</file> 
  
-<file java ~/ansible/roles/ext-respondd/tasks/servicestartup.yml>--- + 
-  - name: "Service ext-respondd beim Booten starten" +<file c++ ~/ansible/roles/ext-respondd/tasks/gitclone.yml>--- 
-    # https://docs.ansible.com/ansible/latest/modules/systemd_module.html + 
-    systemd: +- name: "ggf. bestehende Altlast bereinigen" 
-      name: ext-respondd +  ansible.builtin.file: 
-      daemon_reload: yes +    path: /opt/ext-respondd 
-      state: started +    state: absent 
-      enabled: yes + 
-</file>+- name: "Repo ext-respondd klonen" 
 +  ansible.builtin.git: 
 +    repo: https://github.com/freifunkMUC/ext-respondd 
 +    dest: /opt/ext-respondd/ 
 +    version: master 
 +    clone: true 
 +    update: true 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/ext-respondd/tasks/copyconfig.yml>--- 
 + 
 +- name: "Systemd Startdatei für respondd kopieren" 
 +  ansible.builtin.copy: 
 +    src: /opt/ext-respondd/ext-respondd.service.example 
 +    dest: /etc/systemd/system/ext-respondd.service 
 +    remote_src: true 
 +     # cmd: cp /opt/ext-respondd/ext-respondd.service.example /etc/systemd/system/ext-respondd.service 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/ext-respondd/tasks/aliasgenerate.yml>--- 
 + 
 +- name: "Erstellen der resondd Konfigurationsdatei alias.json" 
 +  ansible.builtin.template: 
 +    src: templates/ext-respondd_alias.json.j2 
 +    dest: /opt/ext-respondd/alias.json 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +...</file> 
 + 
 +<file c++ ~/ansible/roles/ext-respondd/tasks/configgenerate.yml>--- 
 + 
 +- name: "Erstellen der resondd Konfigurationsdatei config.json" 
 +  ansible.builtin.template: 
 +    src: templates/ext-respondd_config.json.j2 
 +    dest: /opt/ext-respondd/config.json 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +...</file> 
 + 
 +<file c++ ~/ansible/roles/ext-respondd/tasks/bugfixing.yml>--- 
 + 
 +- name: "Typo in der /opt/ext-respondd/lib/nodeinfo.py korrigieren" 
 +  ansible.builtin.replace: 
 +    path: /opt/ext-respondd/lib/nodeinfo.py 
 +    # zu ersetzende/korrigierende Zeile 
 +    regexp: 'Processor' 
 +    # wird ersetzt durch 
 +    replace: 'processor' 
 + 
 +...</file> 
 + 
 +<file c++ ~/ansible/roles/ext-respondd/tasks/servicestartup.yml>--- 
 + 
 +- name: "Service ext-respondd beim Booten starten" 
 +  systemd: 
 +    name: ext-respondd 
 +    daemon_reload: true 
 +    state: started 
 +    enabled: true 
 + 
 +...</file> 
  
 == Templates == == Templates ==
-<file java ~/ansible/roles/ext-respondd/templates/ext-respondd_alias.json.j2>{+<file c++ ~/ansible/roles/ext-respondd/templates/ext-respondd_alias.json.j2>{
   "nodeinfo": {   "nodeinfo": {
     "hostname": "{{ raspberry_hostname }}",     "hostname": "{{ raspberry_hostname }}",
Zeile 1294: Zeile 1381:
   },   },
   "firstseen": "2019-08-14T12:34:56"   "firstseen": "2019-08-14T12:34:56"
-} +}</file>
-</file>+
  
 <file java ~/ansible/roles/ext-respondd/templates/ext-respondd_config.json.j2>{ <file java ~/ansible/roles/ext-respondd/templates/ext-respondd_config.json.j2>{
Zeile 1304: Zeile 1390:
   "rate_limit": 30,   "rate_limit": 30,
   "rate_limit_burst": 10   "rate_limit_burst": 10
-} +}</file>
-</file>+
  
  
 === Rolle "hostapd" === === Rolle "hostapd" ===
 == Tasks == == Tasks ==
-<file java ~/ansible/roles/hostapd/tasks/main.yml>--- # Installation und Konfiguration des hostap Treibers für den WiFi-Support+<file c++ ~/ansible/roles/hostapd/tasks/main.yml>--- # Installation und Konfiguration des hostap Treibers für den WiFi-Support
 - include: install.yml                  # Paket hostapd für WLAN installieren - include: install.yml                  # Paket hostapd für WLAN installieren
 - include: configure.yml                # hostapd konfigurieren - include: configure.yml                # hostapd konfigurieren
 - include: genconfig.yml                # hostapd Konfigurationsdatei anlegen - include: genconfig.yml                # hostapd Konfigurationsdatei anlegen
 - include: wlanbridging.yml             # wlan0 in Bridge packen - include: wlanbridging.yml             # wlan0 in Bridge packen
-- include: servicestartup.yml           # Service hostapd beim Booten und jetzt starten und das Laden der Unit Datei vom Service hostapd ermöglichen +- include: servicestartup.yml           # Service hostapd beim Booten und jetzt starten 
-</file>+                                        # und so das Laden der Unit Datei vom Service 
 +                                        # hostapd ermöglichen 
 +... # YML Ende</file>
  
-<file java ~/ansible/roles/hostapd/tasks/configure.yml>--- 
-  - name: "hostapd konfigurieren" 
-    # https://docs.ansible.com/ansible/latest/modules/shell_module.html 
-    shell: echo 'DAEMON_OPTS="-d"' >> /etc/default/hostapd 
-    when: ( raspberry_wifi == "ja" ) 
-</file> 
  
-<file java ~/ansible/roles/hostapd/tasks/genconfig.yml>--- +<file c++ ~/ansible/roles/hostapd/tasks/install.yml>---
-  - name: "hostapd Konfigurationsdatei anlegen" +
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +
-    template:  +
-      src: templates/hostapd.j2 +
-      dest: /etc/hostapd/hostapd.conf +
-    when: ( raspberry_wifi == "ja" ) +
-</file>+
  
-<file java ~/ansible/roles/hostapd/tasks/install.yml>--- +- name: "Paket hostapd für WLAN installieren" 
-  - name: "Paket hostapd für WLAN installieren" +  ansible.builtin.apt: 
-    # https://docs.ansible.com/ansible/latest/modules/apt_module.html +    update_cache: true 
-    apt: +    pkg: 
-      update_cache: yes +      - hostapd 
-      pkg: +    state: present 
-        - hostapd + 
-      state: present +...</file> 
-    when: ( raspberry_wifi == "ja" ) + 
-</file>+ 
 +<file c++ ~/ansible/roles/hostapd/tasks/configure.yml>--- 
 + 
 +- name: "hostapd konfigurieren" 
 +  ansible.builtin.command: | 
 +    echo 'DAEMON_OPTS="-d"' >> /etc/default/hostapd 
 +  changed_when: false 
 + 
 +...</file> 
 + 
 +<file c++ ~/ansible/roles/hostapd/tasks/genconfig.yml>--- 
 + 
 +- name: "hostapd Konfigurationsdatei anlegen" 
 +  ansible.builtin.template: 
 +    src: templates/hostapd.j2 
 +    dest: /etc/hostapd/hostapd.conf 
 +    owner: root 
 +    group: root 
 +    mode: '0644' 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/hostapd/tasks/wlanbridging.yml>--- 
 + 
 +- name: "wlan0 in Bridge packen" 
 +  template: 
 +    src: templates/rclocal_wifi.j2 
 +    dest: /etc/rc.local 
 +    owner: root 
 +    group: root 
 +    mode: '0750' 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/hostapd/tasks/servicestartup.yml>--- 
 + 
 +- name: "Service hostapd beim Booten und jetzt starten und das Laden der Unit Datei vom Service hostapd ermöglichen" 
 +  ansible.builtin.systemd: 
 +    name: hostapd 
 +    enabled: true 
 +    masked: false 
 +    state: started 
 + 
 +...</file>
  
-<file java ~/ansible/roles/hostapd/tasks/servicestartup.yml>--- 
-  - name: "Service hostapd beim Booten und jetzt starten und das Laden der Unit Datei vom Service hostapd ermöglichen" 
-    # https://docs.ansible.com/ansible/latest/modules/systemd_module.html 
-    systemd: 
-      name: hostapd 
-      enabled: yes 
-      masked: no 
-      state: started 
-    when: ( raspberry_wifi == "ja" ) 
-</file> 
  
-<file java ~/ansible/roles/hostapd/tasks/wlanbridging.yml>--- 
-  - name: "wlan0 in Bridge packen" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html 
-    template:  
-      src: templates/rclocal_wifi.j2 
-      dest: /etc/rc.local 
-    when: ( raspberry_wifi == "ja" ) 
-</file> 
  
 == Templates == == Templates ==
-<file java ~/ansible/roles/hostapd/templates/hostapd.j2>ssid=muenchen.freifunk.net/{{ ffmuc_segment }}+<file c++ ~/ansible/roles/hostapd/templates/hostapd.j2>ssid=muenchen.freifunk.net/{{ ffmuc_segment }}
  
 country_code=US country_code=US
Zeile 1396: Zeile 1497:
 vht_oper_chwidth=1 vht_oper_chwidth=1
 channel=36 channel=36
-vht_oper_centr_freq_seg0_idx=42 +vht_oper_centr_freq_seg0_idx=42</file> 
-</file>+
  
 <file java ~/ansible/roles/hostapd/templates/rclocal_wifi.j2>#!/bin/sh -e <file java ~/ansible/roles/hostapd/templates/rclocal_wifi.j2>#!/bin/sh -e
 +# Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
 # #
 # rc.local # rc.local
Zeile 1418: Zeile 1520:
 fi fi
 sleep 10; /sbin/brctl addif br-{{ ffmuc_segment }} wlan0 sleep 10; /sbin/brctl addif br-{{ ffmuc_segment }} wlan0
-exit 0 +exit 0</file>
-</file>+
  
  
 === Rolle "client-mesh" === === Rolle "client-mesh" ===
 == Tasks == == Tasks ==
-<file java ~/ansible/roles/client-mesh/tasks/main.yml>--- # Grundkonfiguration von Client und/oder Meshing (V)LANs+<file c++ ~/ansible/roles/client-mesh/tasks/main.yml>--- # Grundkonfiguration von Client und/oder Meshing (V)LANs
 - include: clientohnemesh.yml           # Konfiguration des Client-VLAN ohne Mesh-Netz - include: clientohnemesh.yml           # Konfiguration des Client-VLAN ohne Mesh-Netz
 - include: getvxlanid.yml               # vxlan_id für ausgewähltes Segment ermitteln - include: getvxlanid.yml               # vxlan_id für ausgewähltes Segment ermitteln
Zeile 1431: Zeile 1532:
 - include: batmanohnewifi.yml           # Konfiguration des bevorzugte Meshingpoint in BATMAN_V ohne Wifi-Nutzung - include: batmanohnewifi.yml           # Konfiguration des bevorzugte Meshingpoint in BATMAN_V ohne Wifi-Nutzung
 - include: batmanmitwifi.yml            # Konfiguration des bevorzugte Meshingpoint in BATMAN_V mit Wifi-Nutzung - include: batmanmitwifi.yml            # Konfiguration des bevorzugte Meshingpoint in BATMAN_V mit Wifi-Nutzung
-</file>+... # YML Ende</file>
  
-<file java ~/ansible/roles/client-mesh/tasks/batmanmitwifi.yml>--- 
-  - name: "Konfiguration des bevorzugte Meshingpoint in BATMAN_V mit Wifi-Nutzung" 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html 
-    template:  
-      src: templates/rclocal_both.j2 
-      dest: /etc/rc.local 
-    when: ( raspberry_meshvlan|length > 0 ) and ( raspberry_wifi == "ja" ) 
-</file> 
  
-<file java  ~/ansible/roles/client-mesh/tasks/batmanohnewifi.yml>--- +<file c++ ~/ansible/roles/client-mesh/tasks/clientohnemesh.yml>---
-  - name: "Konfiguration des bevorzugte Meshingpoint in BATMAN_V ohne Wifi-Nutzung" +
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +
-    template:  +
-      src: templates/rclocal_vxlan.j2 +
-      dest: /etc/rc.local +
-    when: ( raspberry_meshvlan|length > 0 ) and ( raspberry_wifi != "ja" ) +
-</file>+
  
-<file java ~/ansible/roles/client-mesh/tasks/clientohnemesh.yml>django@Djangos-ThinkPad-X230:~$ cat ~/ansible/roles/client-mesh/tasks/clientohnemesh.yml  +- name: "Konfiguration des Client-VLAN ohne Mesh-Netz" 
---- +  ansible.builtin.template: 
-  - name: "Konfiguration des Client-VLAN ohne Mesh-Netz" +    src: templates/interfaces_client_ohne_mesh.j2 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +    dest: /etc/network/interfaces 
-    template:  +    owner: root 
-      src: templates/interfaces_client_ohne_mesh.j2 +    group: root 
-      dest: /etc/network/interfaces +    mode: '0640' 
-    when: ( raspberry_clientvlan|length > 0 ) and ( raspberry_meshvlan|length == 0 ) +  when: ( raspberry_clientvlan|length > 0 ) and ( raspberry_meshvlan|length == 0 )
-</file>+
  
-<file java  ~/ansible/roles/client-mesh/tasks/getvxlanid.yml>--- +...</file>
-  - name: "vxlan_id für ausgewähltes Segment ermitteln" +
-    # https://docs.ansible.com/ansible/latest/modules/set_fact_module.html +
-    set_fact: +
-      ffmuc_vxlan_id: "{{ item.value }}" +
-    loop: "{{ lookup('dict', vxlan_ids) }}" +
-    when: "ffmuc_segment in item.key" +
-</file>+
  
-<file java ~/ansible/roles/client-mesh/tasks/meshohneclient.yml>--- +<file c++ ~/ansible/roles/client-mesh/tasks/getvxlanid.yml>---
-  - name: "Konfiguration des Mesh-VLAN ohne Client-VLAN" +
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +
-    template:  +
-      src: templates/interfaces_mesh_ohne_client.j2 +
-      dest: /etc/network/interfaces +
-    when: ( raspberry_clientvlan|length == 0 ) and ( raspberry_meshvlan|length > 0 ) +
-</file>+
  
-<file java  ~/ansible/roles/client-mesh/tasks/meshundclient.yml>--- +- name: "vxlan_id für ausgewähltes Segment ermitteln" 
-  - name: "Konfiguration von Mesh- und Client-VLAN" +  ansible.builtin.set_fact: 
-    # https://docs.ansible.com/ansible/latest/modules/template_module.html +    ffmuc_vxlan_id: "{{ item.value }}" 
-    template:  +  loop: "{{ lookup('dict', vxlan_ids) }}" 
-      src: templates/interfaces_mesh_mit_client.j2 +  when: "ffmuc_segment in item.key" 
-      dest: /etc/network/interfaces + 
-    when: ( raspberry_clientvlan|length > 0 ) and ( raspberry_meshvlan|length > 0 ) +...</file> 
-</file>+ 
 +<file c++ ~/ansible/roles/client-mesh/tasks/meshohneclient.yml>--- 
 + 
 +- name: "Konfiguration des Mesh-VLAN ohne Client-VLAN" 
 +  ansible.builtin.template: 
 +    src: templates/interfaces_mesh_ohne_client.j2 
 +    dest: /etc/network/interfaces 
 +    owner: root 
 +    group: root 
 +    mode: '0640' 
 +  when: ( raspberry_clientvlan|length == 0 ) and ( raspberry_meshvlan|length > 0 ) 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/client-mesh/tasks/meshundclient.yml>--- 
 + 
 +- name: "Konfiguration von Mesh- und Client-VLAN" 
 +  ansible.builtin.template: 
 +    src: templates/interfaces_mesh_mit_client.j2 
 +    dest: /etc/network/interfaces 
 +    owner: root 
 +    group: root 
 +    mode: '0640' 
 +  when: ( raspberry_clientvlan|length > 0 ) and ( raspberry_meshvlan|length > 0 ) 
 + 
 +...</file> 
 + 
 +<file c++  ~/ansible/roles/client-mesh/tasks/batmanohnewifi.yml>--- 
 + 
 +- name: "Konfiguration des bevorzugte Meshingpoint in BATMAN_V ohne Wifi-Nutzung" 
 +  ansible.builtin.template: 
 +    src: templates/rclocal_vxlan.j2 
 +    dest: /etc/rc.local 
 +    owner: root 
 +    group: root 
 +    mode: '0750' 
 +  when: ( raspberry_meshvlan|length > 0 ) and ( raspberry_wifi != "true" ) 
 + 
 +...</file> 
 + 
 + 
 +<file c++ ~/ansible/roles/client-mesh/tasks/batmanmitwifi.yml>--- 
 + 
 +- name: "Konfiguration des bevorzugte Meshingpoint in BATMAN_V mit Wifi-Nutzung" 
 +  ansible.builtin.template: 
 +    src: templates/rclocal_both.j2 
 +    dest: /etc/rc.local 
 +    owner: root 
 +    group: root 
 +    mode: '0750' 
 +  when: ( raspberry_meshvlan|length > 0 ) and ( raspberry_wifi == "true" ) 
 + 
 +...</file>
  
 == Templates == == Templates ==
-<file java ~/ansible/roles/client-mesh/templates/interfaces_client_ohne_mesh.j2># interfaces(5) file used by ifup(8) and ifdown(8)+<file c++ ~/ansible/roles/client-mesh/templates/interfaces_client_ohne_mesh.j2># Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually! 
 +# interfaces(5) file used by ifup(8) and ifdown(8)
  
 # Please note that this file is written to be used with dhcpcd # Please note that this file is written to be used with dhcpcd
Zeile 1514: Zeile 1639:
         pre-up /usr/sbin/batctl meshif bat-{{ ffmuc_segment }} gw_mode client         pre-up /usr/sbin/batctl meshif bat-{{ ffmuc_segment }} gw_mode client
         pre-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev bat-{{ ffmuc_segment }}         pre-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev bat-{{ ffmuc_segment }}
-        post-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev br-{{ ffmuc_segment }} +        post-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev br-{{ ffmuc_segment }}</file>
-</file>+
  
-<file java ~/ansible/roles/client-mesh/templates/interfaces_mesh_mit_client.j2># interfaces(5) file used by ifup(8) and ifdown(8)+ 
 +<file c++ ~/ansible/roles/client-mesh/templates/interfaces_mesh_mit_client.j2># Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually! 
 +# interfaces(5) file used by ifup(8) and ifdown(8)
  
 # Please note that this file is written to be used with dhcpcd # Please note that this file is written to be used with dhcpcd
Zeile 1554: Zeile 1680:
 </file> </file>
  
-<file java ~/ansible/roles/client-mesh/templates/interfaces_mesh_ohne_client.j2># interfaces(5) file used by ifup(8) and ifdown(8)+ 
 +<file java ~/ansible/roles/client-mesh/templates/interfaces_mesh_ohne_client.j2># Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually! 
 +# interfaces(5) file used by ifup(8) and ifdown(8)
  
 # Please note that this file is written to be used with dhcpcd # Please note that this file is written to be used with dhcpcd
Zeile 1585: Zeile 1713:
         pre-up /usr/sbin/batctl meshif bat-{{ ffmuc_segment }} gw_mode client         pre-up /usr/sbin/batctl meshif bat-{{ ffmuc_segment }} gw_mode client
         pre-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev bat-{{ ffmuc_segment }}         pre-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev bat-{{ ffmuc_segment }}
-        post-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev br-{{ ffmuc_segment }} +        post-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev br-{{ ffmuc_segment }}</file> 
-</file>+
  
 <file bash ~/ansible/roles/client-mesh/templates/rclocal_both.j2>#!/bin/sh -e <file bash ~/ansible/roles/client-mesh/templates/rclocal_both.j2>#!/bin/sh -e
 +# Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
 # #
 # rc.local # rc.local
Zeile 1608: Zeile 1737:
 sleep 10; /sbin/brctl addif br-{{ ffmuc_segment }} wlan0 sleep 10; /sbin/brctl addif br-{{ ffmuc_segment }} wlan0
 /usr/sbin/batctl hardif mesh-vpn throughput_override 10000 /usr/sbin/batctl hardif mesh-vpn throughput_override 10000
-exit 0 +exit 0</file> 
-</file>+
  
 <file bash ~/ansible/roles/client-mesh/templates/rclocal_vxlan.j2>#!/bin/sh -e <file bash ~/ansible/roles/client-mesh/templates/rclocal_vxlan.j2>#!/bin/sh -e
 +# Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
 # #
 # rc.local # rc.local
Zeile 1630: Zeile 1760:
 fi fi
 /usr/sbin/batctl hardif mesh-vpn throughput_override 10000 /usr/sbin/batctl hardif mesh-vpn throughput_override 10000
-exit 0 +exit 0</file>
-</file> +
  
 +/* 
 === Rolle "oled" === === Rolle "oled" ===
 == Tasks == == Tasks ==
Zeile 2059: Zeile 2188:
 # see man systemd.unit # see man systemd.unit
 Description=Starting OLED-Trafic output Description=Starting OLED-Trafic output
-Documentation=https://wiki.mailserver.guru/doku.php/centos:ansible:ffmuc-rpb4-ol+Documentation=https://dokuwiki.nausch.org/doku.php/centos:ansible:ffmuc-rpb4-ol
 After=network.target After=network.target
  
Zeile 2072: Zeile 2201:
 </file> </file>
  
 +*/
  
 === Rolle "final" === === Rolle "final" ===
 == Tasks == == Tasks ==
 <file java ~/ansible/roles/final/tasks/main.yml>--- # Reboot nach Abschluss der Konfiguration unseres Offloaders <file java ~/ansible/roles/final/tasks/main.yml>--- # Reboot nach Abschluss der Konfiguration unseres Offloaders
-- include: reboot.yml                   # /etc/hosts anpassen +- include: reboot.yml                   # abschließender Reboot nach Fertigstellung 
-... #YAML Ende Syntax +... # YML Ende</file> 
-</file>+
  
 <file java ~/ansible/roles/final/tasks/reboot.yml>--- <file java ~/ansible/roles/final/tasks/reboot.yml>---
-  - name: "Reboot nach Abschluss der Konfiguration unseres Offloaders" + 
-    # https://docs.ansible.com/ansible/latest/modules/reboot_module.html +- name: "Reboot nach Abschluss der Konfiguration unseres Offloaders" 
-    reboot: +  ansible.builtin.reboot: 
-</file>+ 
 +...</file>
  
 ==== Download des auf Debian Buster basierenden Raspbian ==== ==== Download des auf Debian Buster basierenden Raspbian ====
Zeile 2208: Zeile 2339:
 Hier werden die zur Konfiguration benötigten Parameter nicht beim Aufruf des Playbooks abgefragt, sondern in zugehörigen **[[#inventory-definition|Inventory-Datei]]** hinterlegt. Das ist im ersten Schritt für den ungeübten Ansible-Nutzer zwar augenscheinlich aufwändiger, hat aber den Vorteil, dass man die zur Konfiguration benötigten Parameter immer sofort "zur Hand" hat.  Hier werden die zur Konfiguration benötigten Parameter nicht beim Aufruf des Playbooks abgefragt, sondern in zugehörigen **[[#inventory-definition|Inventory-Datei]]** hinterlegt. Das ist im ersten Schritt für den ungeübten Ansible-Nutzer zwar augenscheinlich aufwändiger, hat aber den Vorteil, dass man die zur Konfiguration benötigten Parameter immer sofort "zur Hand" hat. 
  
-In den Zeilen **''55 bis 64''** sind diese Parameter entsprechend zu hinterlegen.  +In der Host-spezifischen Konfigurationsdatei  sind diese Parameter entsprechend zu hinterlegen. Folgendes Beispiel zeigt dies für den Host mit dem Namen **rpb4-ol-b** aus dem Inventory. 
-   $ vim ~/ansible/inventories/production/hosts.yml +54+   $ vim ~/ansible/inventories/production/host_vars/rpb4-ol-b/individual_host_specification 
 + 
 +<code># IP-Adresse unseres Raspberry in unserem eigenen lokalen Netzwerk 
 +# stationäre schwarzes Plastikgehäuse Raspberry 4B mit PoE-HAT und Display 
 +# MAC: dc:a6:32:22:f0:f2 
 +ansible_ssh_host: 192.168.0.22 
 +ansible_port: 22 
 +ansible_user: pi 
 +ansible_ssh_private_key_file: ~/.ssh/id_ed25519_freifunk 
 +# 
 +batman_adv_version: "2022.1" 
 +ffmuc_segment: "muc_ost" 
 +ffmuc_gateway: "gw06" 
 +raspberry_hostname: "ff_pliening_rpb4_ol_v6" 
 +node_contact_address: "hier entlang => https://bit.ly/2VxGoXp" 
 +raspberry_latitude: "48.198757565" 
 +raspberry_longitude: "11.798020899" 
 +raspberry_wifi: "true" 
 +raspberry_clientvlan: "4" 
 +raspberry_meshvlan: "2" 
 +raspberry_oled: "false"</code>
  
-<code> 54     batman_adv_version:   "2020.4" +Diese passen wir natürlich noch auf unsere lokale Umgebung hin an.
- 55     ffmuc_segment:        "muc_ost" +
- 56     ffmuc_gateway:        "gw04" +
- 57     raspberry_hostname:   "raspbian-ansible-offloader" +
- 58     node_contact_address: "https://bit.ly/2VxGoXp" +
- 59     raspberry_latitude:   "48.239094621" +
- 60     raspberry_longitude:  "11.558936834" +
- 61     raspberry_wifi:       "ja" +
- 62     raspberry_clientvlan: "123" +
- 63     raspberry_meshvlan:   "456" +
- 64     raspberry_oled:       "ja"</code>+
  
 === Playbook Lauf === === Playbook Lauf ===
Zeile 2544: Zeile 2685:
   * **[[wiki:start|Zurück zu >>Projekte und Themenkapitel<<]]**   * **[[wiki:start|Zurück zu >>Projekte und Themenkapitel<<]]**
   * **[[http://dokuwiki.nausch.org/doku.php/|Zurück zur Startseite]]**   * **[[http://dokuwiki.nausch.org/doku.php/|Zurück zur Startseite]]**
 +
  • linux/ansible/ffmuc-rpb4-ol.1664291003.txt.gz
  • Zuletzt geändert: 27.09.2022 15:03.
  • von django