# Generated by Ansible on {{ ansible_date_time.date }}, do not edit manually!
# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
# source-directory /etc/network/interfaces.d

auto eth0
iface eth0 inet dhcp

auto eth0.{{ raspberry_clientvlan }}
iface eth0.{{ raspberry_clientvlan }} inet manual
 
auto br-{{ ffmuc_segment }}
iface br-{{ ffmuc_segment }} inet dhcp
        bridge-ports bat-{{ ffmuc_segment }} eth0.{{ raspberry_clientvlan }}
        pre-up /usr/sbin/batctl ra BATMAN_V
        pre-up /sbin/ip link add dummy-{{ ffmuc_segment }} type dummy
        pre-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev dummy-{{ ffmuc_segment }}
        pre-up /sbin/ip link set dummy-{{ ffmuc_segment }} up
        pre-up /usr/sbin/batctl meshif bat-{{ ffmuc_segment }} if add dummy-{{ ffmuc_segment }}
        pre-up /sbin/ip link set bat-{{ ffmuc_segment }} up
        pre-up /usr/sbin/batctl meshif bat-{{ ffmuc_segment }} gw_mode client
        pre-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev bat-{{ ffmuc_segment }}
        post-up /sbin/ip link set address $(ip -br l | grep eth0 | egrep -o '([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})' | head -1) dev br-{{ ffmuc_segment }}