─────┬─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── │ File: /etc/httpd/conf/httpd.conf ─────┼─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── 1 │ # 2 │ # This is the main Apache HTTP server configuration file. It contains the 3 │ # configuration directives that give the server its instructions. 4 │ # See for detailed information. 5 │ # In particular, see 6 │ # 7 │ # for a discussion of each configuration directive. 8 │ # 9 │ # Do NOT simply read the instructions in here without understanding 10 │ # what they do. They're here only as hints or reminders. If you are unsure 11 │ # consult the online docs. You have been warned. 12 │ # 13 │ # Configuration and logfile names: If the filenames you specify for many 14 │ # of the server's control files begin with "/" (or "drive:/" for Win32), the 15 │ # server will use that explicit path. If the filenames do *not* begin 16 │ # with "/", the value of ServerRoot is prepended -- so "logs/access_log" 17 │ # with ServerRoot set to "/usr/local/apache2" will be interpreted by the 18 │ # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 19 │ # will be interpreted as '/logs/access_log'. 20 │ 21 │ # 22 │ # ServerRoot: The top of the directory tree under which the server's 23 │ # configuration, error, and log files are kept. 24 │ # 25 │ # Do not add a slash at the end of the directory path. If you point 26 │ # ServerRoot at a non-local disk, be sure to specify a local disk on the 27 │ # Mutex directive, if file-based mutexes are used. If you wish to share the 28 │ # same ServerRoot for multiple httpd daemons, you will need to change at 29 │ # least PidFile. 30 │ # 31 │ ServerRoot "/etc/httpd" 32 │ 33 │ # 34 │ # Mutex: Allows you to set the mutex mechanism and mutex file directory 35 │ # for individual mutexes, or change the global defaults 36 │ # 37 │ # Uncomment and change the directory if mutexes are file-based and the default 38 │ # mutex file directory is not on a local disk or is not appropriate for some 39 │ # other reason. 40 │ # 41 │ # Mutex default:/run/httpd 42 │ 43 │ # 44 │ # Listen: Allows you to bind Apache to specific IP addresses and/or 45 │ # ports, instead of the default. See also the 46 │ # directive. 47 │ # 48 │ # Change this to Listen on specific IP addresses as shown below to 49 │ # prevent Apache from glomming onto all bound IP addresses. 50 │ # 51 │ #Listen 12.34.56.78:80 52 │ Listen 80 53 │ 54 │ # 55 │ # Dynamic Shared Object (DSO) Support 56 │ # 57 │ # To be able to use the functionality of a module which was built as a DSO you 58 │ # have to place corresponding `LoadModule' lines at this location so the 59 │ # directives contained in it are actually available _before_ they are used. 60 │ # Statically compiled modules (those listed by `httpd -l') do not need 61 │ # to be loaded here. 62 │ # 63 │ # Example: 64 │ # LoadModule foo_module modules/mod_foo.so 65 │ # 66 │ LoadModule mpm_event_module modules/mod_mpm_event.so 67 │ #LoadModule mpm_prefork_module modules/mod_mpm_prefork.so 68 │ #LoadModule mpm_worker_module modules/mod_mpm_worker.so 69 │ LoadModule authn_file_module modules/mod_authn_file.so 70 │ #LoadModule authn_dbm_module modules/mod_authn_dbm.so 71 │ #LoadModule authn_anon_module modules/mod_authn_anon.so 72 │ #LoadModule authn_dbd_module modules/mod_authn_dbd.so 73 │ #LoadModule authn_socache_module modules/mod_authn_socache.so 74 │ LoadModule authn_core_module modules/mod_authn_core.so 75 │ LoadModule authz_host_module modules/mod_authz_host.so 76 │ LoadModule authz_groupfile_module modules/mod_authz_groupfile.so 77 │ LoadModule authz_user_module modules/mod_authz_user.so 78 │ #LoadModule authz_dbm_module modules/mod_authz_dbm.so 79 │ #LoadModule authz_owner_module modules/mod_authz_owner.so 80 │ #LoadModule authz_dbd_module modules/mod_authz_dbd.so 81 │ LoadModule authz_core_module modules/mod_authz_core.so 82 │ #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so 83 │ #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so 84 │ LoadModule access_compat_module modules/mod_access_compat.so 85 │ LoadModule auth_basic_module modules/mod_auth_basic.so 86 │ #LoadModule auth_form_module modules/mod_auth_form.so 87 │ # Django : 2026-02-07 88 │ # default: #LoadModule auth_digest_module modules/mod_auth_digest.so 89 │ LoadModule auth_digest_module modules/mod_auth_digest.so 90 │ #LoadModule allowmethods_module modules/mod_allowmethods.so 91 │ #LoadModule file_cache_module modules/mod_file_cache.so 92 │ #LoadModule cache_module modules/mod_cache.so 93 │ #LoadModule cache_disk_module modules/mod_cache_disk.so 94 │ #LoadModule cache_socache_module modules/mod_cache_socache.so 95 │ # Django : 2026-02-09 96 │ # default: #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so 97 │ LoadModule socache_shmcb_module modules/mod_socache_shmcb.so 98 │ #LoadModule socache_dbm_module modules/mod_socache_dbm.so 99 │ #LoadModule socache_memcache_module modules/mod_socache_memcache.so 100 │ #LoadModule socache_redis_module modules/mod_socache_redis.so 101 │ #LoadModule watchdog_module modules/mod_watchdog.so 102 │ #LoadModule macro_module modules/mod_macro.so 103 │ #LoadModule dbd_module modules/mod_dbd.so 104 │ #LoadModule dumpio_module modules/mod_dumpio.so 105 │ #LoadModule echo_module modules/mod_echo.so 106 │ #LoadModule buffer_module modules/mod_buffer.so 107 │ #LoadModule data_module modules/mod_data.so 108 │ #LoadModule ratelimit_module modules/mod_ratelimit.so 109 │ LoadModule reqtimeout_module modules/mod_reqtimeout.so 110 │ #LoadModule ext_filter_module modules/mod_ext_filter.so 111 │ #LoadModule request_module modules/mod_request.so 112 │ LoadModule include_module modules/mod_include.so 113 │ LoadModule filter_module modules/mod_filter.so 114 │ #LoadModule reflector_module modules/mod_reflector.so 115 │ #LoadModule substitute_module modules/mod_substitute.so 116 │ #LoadModule sed_module modules/mod_sed.so 117 │ #LoadModule charset_lite_module modules/mod_charset_lite.so 118 │ # Django : 2026-02-08 119 │ # default: #LoadModule deflate_module modules/mod_deflate.so 120 │ LoadModule deflate_module modules/mod_deflate.so 121 │ #LoadModule xml2enc_module modules/mod_xml2enc.so 122 │ #LoadModule proxy_html_module modules/mod_proxy_html.so 123 │ #LoadModule brotli_module modules/mod_brotli.so 124 │ LoadModule mime_module modules/mod_mime.so 125 │ #LoadModule ldap_module modules/mod_ldap.so 126 │ LoadModule log_config_module modules/mod_log_config.so 127 │ #LoadModule log_debug_module modules/mod_log_debug.so 128 │ #LoadModule log_forensic_module modules/mod_log_forensic.so 129 │ # Django : 2028-02-08 130 │ # default: #LoadModule logio_module modules/mod_logio.so 131 │ # This module provides the logging of input and output number of bytes 132 │ # received/sent per request. The numbers reflect the actual bytes as 133 │ # received on the network, which then takes into account the headers and 134 │ # bodies of requests and responses. The counting is done before SSL/TLS 135 │ # on input and after SSL/TLS on output, so the numbers will correctly 136 │ # reflect any changes made by encryption. 137 │ LoadModule logio_module modules/mod_logio.so 138 │ #LoadModule lua_module modules/mod_lua.so 139 │ LoadModule env_module modules/mod_env.so 140 │ #LoadModule mime_magic_module modules/mod_mime_magic.so 141 │ #LoadModule cern_meta_module modules/mod_cern_meta.so 142 │ #LoadModule expires_module modules/mod_expires.so 143 │ LoadModule headers_module modules/mod_headers.so 144 │ #LoadModule ident_module modules/mod_ident.so 145 │ #LoadModule usertrack_module modules/mod_usertrack.so 146 │ #LoadModule unique_id_module modules/mod_unique_id.so 147 │ LoadModule setenvif_module modules/mod_setenvif.so 148 │ LoadModule version_module modules/mod_version.so 149 │ # Django : 2026-02-08 150 │ # default: #LoadModule remoteip_module modules/mod_remoteip.so 151 │ # This module is used to treat the useragent which initiated the request 152 │ # as the originating useragent as identified by httpd for the purposes 153 │ # of authorization and logging, even where that useragent is behind a 154 │ # load balancer, front end server, or proxy server. 155 │ # The module overrides the client IP address for the connection with the 156 │ # useragent IP address reported in the request header configured with 157 │ # the RemoteIPHeader directive. 158 │ LoadModule remoteip_module modules/mod_remoteip.so 159 │ # Django : 2026-02-08 160 │ # default: #LoadModule proxy_module modules/mod_proxy.so 161 │ # mod_proxy and related modules implement a proxy/gateway for Apache 162 │ # HTTP Server, supporting a number of popular protocols as well as 163 │ # several different load balancing algorithms. Third-party modules can 164 │ # add support for additional protocols and load balancing algorithms. 165 │ # A set of modules must be loaded into the server to provide the 166 │ # necessary features. These modules can be included statically at build 167 │ # time or dynamically via the LoadModule directive). The set must include: 168 │ # mod_proxy, which provides basic proxy capabilities 169 │ LoadModule proxy_module modules/mod_proxy.so 170 │ #LoadModule proxy_connect_module modules/mod_proxy_connect.so 171 │ #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so 172 │ #LoadModule proxy_http_module modules/mod_proxy_http.so 173 │ # Django : 2026-02-08 174 │ # default: #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so 175 │ # This module requires the service of mod_proxy. It provides support for 176 │ # the FastCGI protocol. 177 │ # Thus, in order to get the ability of handling the FastCGI protocol, 178 │ # mod_proxy and mod_proxy_fcgi have to be present in the server. 179 │ LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so 180 │ #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so 181 │ #LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so 182 │ #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so 183 │ #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so 184 │ #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so 185 │ #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so 186 │ #LoadModule proxy_express_module modules/mod_proxy_express.so 187 │ #LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so 188 │ #LoadModule session_module modules/mod_session.so 189 │ #LoadModule session_cookie_module modules/mod_session_cookie.so 190 │ #LoadModule session_crypto_module modules/mod_session_crypto.so 191 │ #LoadModule session_dbd_module modules/mod_session_dbd.so 192 │ LoadModule slotmem_shm_module modules/mod_slotmem_shm.so 193 │ #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so 194 │ # Django : 2026-02-09 195 │ # default: #LoadModule ssl_module modules/mod_ssl.so 196 │ LoadModule ssl_module modules/mod_ssl.so 197 │ #LoadModule dialup_module modules/mod_dialup.so 198 │ # Django : 2026-02-08 199 │ # default: #LoadModule http2_module modules/mod_http2.so 200 │ LoadModule http2_module modules/mod_http2.so 201 │ #LoadModule proxy_http2_module modules/mod_proxy_http2.so 202 │ #LoadModule md_module modules/mod_md.so 203 │ #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so 204 │ #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so 205 │ #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so 206 │ #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so 207 │ LoadModule unixd_module modules/mod_unixd.so 208 │ #LoadModule heartbeat_module modules/mod_heartbeat.so 209 │ #LoadModule heartmonitor_module modules/mod_heartmonitor.so 210 │ #LoadModule dav_module modules/mod_dav.so 211 │ LoadModule status_module modules/mod_status.so 212 │ LoadModule autoindex_module modules/mod_autoindex.so 213 │ #LoadModule asis_module modules/mod_asis.so 214 │ # Django : 2026-02-08 215 │ # default: #LoadModule info_module modules/mod_info.so 216 │ LoadModule info_module modules/mod_info.so 217 │ #LoadModule suexec_module modules/mod_suexec.so 218 │ 219 │ #LoadModule cgid_module modules/mod_cgid.so 220 │ 221 │ 222 │ #LoadModule cgi_module modules/mod_cgi.so 223 │ 224 │ #LoadModule dav_fs_module modules/mod_dav_fs.so 225 │ #LoadModule dav_lock_module modules/mod_dav_lock.so 226 │ #LoadModule vhost_alias_module modules/mod_vhost_alias.so 227 │ LoadModule negotiation_module modules/mod_negotiation.so 228 │ LoadModule dir_module modules/mod_dir.so 229 │ #LoadModule imagemap_module modules/mod_imagemap.so 230 │ #LoadModule actions_module modules/mod_actions.so 231 │ #LoadModule speling_module modules/mod_speling.so 232 │ LoadModule userdir_module modules/mod_userdir.so 233 │ LoadModule alias_module modules/mod_alias.so 234 │ # Django : 2026-02-09 235 │ # default: #LoadModule rewrite_module modules/mod_rewrite.so 236 │ LoadModule rewrite_module modules/mod_rewrite.so 237 │ 238 │ 239 │ # 240 │ # If you wish httpd to run as a different user or group, you must run 241 │ # httpd as root initially and it will switch. 242 │ # 243 │ # User/Group: The name (or #number) of the user/group to run httpd as. 244 │ # It is usually good practice to create a dedicated user and group for 245 │ # running httpd, as with most system services. 246 │ # 247 │ User http 248 │ Group http 249 │ 250 │ 251 │ 252 │ # Django : 2026-02-08 253 │ # default: unset 254 │ 255 │ # Allows HTTP/2 negotiation (h2) via TLS ALPN for secure . 256 │ # Allows HTTP/2 cleartext negotiation (h2c) upgrading from an initial 257 │ # HTTP/1.1 connection or via HTTP/2 preamble checking (Direct mode, 258 │ # see H2Direct: 259 │ # https://httpd.apache.org/docs/current/mod/mod_http2.html#h2direct). 260 │ Protocols h2 h2c http/1.1 261 │ # There is one more thing to ordering: the client has its own 262 │ # preferences, too. If you want, you can configure your server to 263 │ # select the protocol most preferred by the client: 264 │ ProtocolsHonorOrder Off 265 │ 266 │ 267 │ # Django : 2026-02-08 268 │ # default: unset 269 │ 270 │ # Compression is implemented by the DEFLATE filter. The following 271 │ # directive will enable compression for all outgoing content. 272 │ SetOutputFilter DEFLATE 273 │ # Exclude uncompressible browser via part of user-agent string 274 │ BrowserMatch ^Mozilla/4\.0[678] no-gzip 275 │ BrowserMatch ^Mozilla/4 gzip-only-text/html 276 │ BrowserMatch \bMSIE !no-gzip !gzip-only-text/html 277 │ # Exclude compression of content that cannot be further compressed 278 │ # based on the file type. 279 │ 280 │ SetEnvIfNoCase Request_URI \.(?:png|jpe?g|gif|tar|gz|zip)$ no-gzip 281 │ 282 │ 283 │ # The mod_deflate module sends a Vary: Accept-Encoding HTTP 284 │ # response header to alert proxies that a cached response should 285 │ # be sent only to clients that send the appropriate Accept- 286 │ # -Encoding request header. This prevents compressed content 287 │ # from being sent to a client that will not understand it. 288 │ Header append Vary User-Agent 289 │ 290 │ 291 │ 292 │ # 'Main' server configuration 293 │ # 294 │ # The directives in this section set up the values used by the 'main' 295 │ # server, which responds to any requests that aren't handled by a 296 │ # definition. These values also provide defaults for 297 │ # any containers you may define later in the file. 298 │ # 299 │ # All of these directives may appear inside containers, 300 │ # in which case these default settings will be overridden for the 301 │ # virtual host being defined. 302 │ # 303 │ 304 │ # 305 │ # ServerAdmin: Your address, where problems with the server should be 306 │ # e-mailed. This address appears on some server-generated pages, such 307 │ # as error documents. e.g. admin@your-domain.com 308 │ # 309 │ # Django : 2026-02-07 310 │ # default: ServerAdmin you@example.com 311 │ ServerAdmin webmaster@nausch.org 312 │ 313 │ # 314 │ # ServerName gives the name and port that the server uses to identify itself. 315 │ # This can often be determined automatically, but we recommend you specify 316 │ # it explicitly to prevent problems during startup. 317 │ # 318 │ # If your host doesn't have a registered DNS name, enter its IP address here. 319 │ # 320 │ # Django : 2026-02-07 321 │ # default: #ServerName www.example.com:80 322 │ ServerName vml000081.idmz.nausch.org:80 323 │ 324 │ # 325 │ # Deny access to the entirety of your server's filesystem. You must 326 │ # explicitly permit access to web content directories in other 327 │ # blocks below. 328 │ # 329 │ 330 │ AllowOverride none 331 │ Require all denied 332 │ 333 │ 334 │ # 335 │ # Note that from this point forward you must specifically allow 336 │ # particular features to be enabled - so if something's not working as 337 │ # you might expect, make sure that you have specifically enabled it 338 │ # below. 339 │ # 340 │ 341 │ # 342 │ # DocumentRoot: The directory out of which you will serve your 343 │ # documents. By default, all requests are taken from this directory, but 344 │ # symbolic links and aliases may be used to point to other locations. 345 │ # 346 │ DocumentRoot "/srv/http" 347 │ 348 │ # 349 │ # Possible values for the Options directive are "None", "All", 350 │ # or any combination of: 351 │ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews 352 │ # 353 │ # Note that "MultiViews" must be named *explicitly* --- "Options All" 354 │ # doesn't give it to you. 355 │ # 356 │ # The Options directive is both complicated and important. Please see 357 │ # http://httpd.apache.org/docs/2.4/mod/core.html#options 358 │ # for more information. 359 │ # 360 │ # Django: 2026-02-07 361 │ # default : Options Indexes FollowSymLinks 362 │ Options -Indexes +FollowSymLinks 363 │ 364 │ # 365 │ # AllowOverride controls what directives may be placed in .htaccess files. 366 │ # It can be "All", "None", or any combination of the keywords: 367 │ # AllowOverride FileInfo AuthConfig Limit 368 │ # 369 │ AllowOverride None 370 │ 371 │ # 372 │ # Controls who can get stuff from this server. 373 │ # 374 │ Require all granted 375 │ 376 │ 377 │ # 378 │ # DirectoryIndex: sets the file that Apache will serve if a directory 379 │ # is requested. 380 │ # 381 │ 382 │ # Django : 2026-02-08 383 │ # default: DirectoryIndex index.html 384 │ DirectoryIndex index.php index.html 385 │ 386 │ 387 │ # 388 │ # The following lines prevent .htaccess and .htpasswd files from being 389 │ # viewed by Web clients. 390 │ # 391 │ 392 │ Require all denied 393 │ 394 │ 395 │ # 396 │ # ErrorLog: The location of the error log file. 397 │ # If you do not specify an ErrorLog directive within a 398 │ # container, error messages relating to that virtual host will be 399 │ # logged here. If you *do* define an error logfile for a 400 │ # container, that host's errors will be logged there and not here. 401 │ # 402 │ ErrorLog "/var/log/httpd/error_log" 403 │ 404 │ # 405 │ # LogLevel: Control the number of messages logged to the error_log. 406 │ # Possible values include: debug, info, notice, warn, error, crit, 407 │ # alert, emerg. 408 │ # 409 │ LogLevel warn 410 │ 411 │ 412 │ # 413 │ # The following directives define some format nicknames for use with 414 │ # a CustomLog directive (see below). 415 │ # 416 │ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined 417 │ LogFormat "%h %l %u %t \"%r\" %>s %b" common 418 │ 419 │ # Django : 2026-02-08 420 │ # default: 421 │ # # You need to enable mod_logio.c to use %I and %O 422 │ # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio 423 │ # 424 │ 425 │ # This module provides the logging of input and output number of bytes received/sent per request. 426 │ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %{SSL_PROTOCOL}e %{SSL_CIPHER}e" combined_ssl 427 │ LogFormat "%h %l %u %t \"%r\" %>s %b %{SSL_PROTOCOL}e %{SSL_CIPHER}e" common_ssl 428 │ 429 │ 430 │ 431 │ # The mod_setenvif module allows you to set internal environment variables 432 │ # according to whether different aspects of the request match regular 433 │ # expressions you specify. These environment variables can be used by 434 │ # other parts of the server to make decisions about actions to be taken, 435 │ # as well as becoming available to CGI scripts and SSI pages 436 │ SetEnvIF User-Agent "HAProxy" dontlog=yes 437 │ 438 │ 439 │ # This module is used to treat the useragent which initiated the request 440 │ # as the originating useragent as identified by httpd for the purposes of 441 │ # authorization and logging, even where that useragent is behind a load 442 │ # balancer, front end server, or proxy server. 443 │ # The module overrides the client IP address for the connection with the 444 │ # useragent IP address reported in the request header configured with the 445 │ # RemoteIPHeader directive. 446 │ # Additionally, this module implements the server side of HAProxy's PROXY 447 │ # Protocol when using the RemoteIPProxyProtocol directive. 448 │ RemoteIPHeader X-Forwarded-For 449 │ RemoteIPInternalProxy 10.0.0.80 450 │ RemoteIPInternalProxy fd00::3:10:0:0:80 451 │ 452 │ 453 │ CustomLog /var/log/httpd/access.log combined_deflate_ssl "expr=(reqenv('dontlog') != 'yes')" 454 │ 455 │ 456 │ # 457 │ # The location and format of the access logfile (Common Logfile Format). 458 │ # If you do not define any access logfiles within a 459 │ # container, they will be logged here. Contrariwise, if you *do* 460 │ # define per- access logfiles, transactions will be 461 │ # logged therein and *not* in this file. 462 │ # 463 │ # Django : 2026-02-08 464 │ # default: CustomLog "/var/log/httpd/access_log" common 465 │ # CustomLog "/var/log/httpd/access_log" common 466 │ 467 │ # 468 │ # If you prefer a logfile with access, agent, and referer information 469 │ # (Combined Logfile Format) you can use the following directive. 470 │ # 471 │ # Django : 2026-02-08 472 │ # default: #CustomLog "/var/log/httpd/access_log" combined 473 │ CustomLog "/var/log/httpd/access_log" combined_deflate 474 │ 475 │ # Django : 2026-02-08 476 │ # default: unset 477 │ 478 │ # The mod_deflate module provides the DEFLATE output filter that allows 479 │ # output from your server to be compressed before being sent to the 480 │ # client over the network. You need to enable mod_deflate.c to use 481 │ # instream, outstream and ratio. 482 │ DeflateFilterNote Input instream 483 │ DeflateFilterNote Output outstream 484 │ DeflateFilterNote Ratio ratio 485 │ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %b %{outstream}n/%{instream}n (%{ratio}n%%)" combined_deflate 486 │ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %{SSL_PROTOCOL}e %{SSL_CIPHER}e %b %{outstream}n/%{instream}n (%{r │ atio}n%%)" combined_deflate_ssl 487 │ 488 │ 489 │ 490 │ 491 │ # 492 │ # Redirect: Allows you to tell clients about documents that used to 493 │ # exist in your server's namespace, but do not anymore. The client 494 │ # will make a new request for the document at its new location. 495 │ # Example: 496 │ # Redirect permanent /foo http://www.example.com/bar 497 │ 498 │ # 499 │ # Alias: Maps web paths into filesystem paths and is used to 500 │ # access content that does not live under the DocumentRoot. 501 │ # Example: 502 │ # Alias /webpath /full/filesystem/path 503 │ # 504 │ # If you include a trailing / on /webpath then the server will 505 │ # require it to be present in the URL. You will also likely 506 │ # need to provide a section to allow access to 507 │ # the filesystem path. 508 │ 509 │ # 510 │ # ScriptAlias: This controls which directories contain server scripts. 511 │ # ScriptAliases are essentially the same as Aliases, except that 512 │ # documents in the target directory are treated as applications and 513 │ # run by the server when requested rather than as documents sent to the 514 │ # client. The same rules about trailing "/" apply to ScriptAlias 515 │ # directives as to Alias. 516 │ # 517 │ ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/" 518 │ 519 │ 520 │ 521 │ 522 │ # 523 │ # ScriptSock: On threaded servers, designate the path to the UNIX 524 │ # socket used to communicate with the CGI daemon of mod_cgid. 525 │ # 526 │ #Scriptsock cgisock 527 │ 528 │ 529 │ # 530 │ # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased 531 │ # CGI directory exists, if you have that configured. 532 │ # 533 │ 534 │ AllowOverride None 535 │ Options None 536 │ Require all granted 537 │ 538 │ 539 │ 540 │ # 541 │ # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied 542 │ # backend servers which have lingering "httpoxy" defects. 543 │ # 'Proxy' request header is undefined by the IETF, not listed by IANA 544 │ # 545 │ RequestHeader unset Proxy early 546 │ 547 │ 548 │ 549 │ # 550 │ # TypesConfig points to the file containing the list of mappings from 551 │ # filename extension to MIME-type. 552 │ # 553 │ TypesConfig conf/mime.types 554 │ 555 │ # 556 │ # AddType allows you to add to or override the MIME configuration 557 │ # file specified in TypesConfig for specific file types. 558 │ # 559 │ #AddType application/x-gzip .tgz 560 │ # 561 │ # AddEncoding allows you to have certain browsers uncompress 562 │ # information on the fly. Note: Not all browsers support this. 563 │ # 564 │ #AddEncoding x-compress .Z 565 │ #AddEncoding x-gzip .gz .tgz 566 │ # 567 │ # If the AddEncoding directives above are commented-out, then you 568 │ # probably should define those extensions to indicate media types: 569 │ # 570 │ AddType application/x-compress .Z 571 │ AddType application/x-gzip .gz .tgz 572 │ 573 │ # 574 │ # AddHandler allows you to map certain file extensions to "handlers": 575 │ # actions unrelated to filetype. These can be either built into the server 576 │ # or added with the Action directive (see below) 577 │ # 578 │ # To use CGI scripts outside of ScriptAliased directories: 579 │ # (You will also need to add "ExecCGI" to the "Options" directive.) 580 │ # 581 │ #AddHandler cgi-script .cgi 582 │ 583 │ # For type maps (negotiated resources): 584 │ #AddHandler type-map var 585 │ 586 │ # 587 │ # Filters allow you to process content before it is sent to the client. 588 │ # 589 │ # To parse .shtml files for server-side includes (SSI): 590 │ # (You will also need to add "Includes" to the "Options" directive.) 591 │ # 592 │ #AddType text/html .shtml 593 │ #AddOutputFilter INCLUDES .shtml 594 │ 595 │ 596 │ # 597 │ # The mod_mime_magic module allows the server to use various hints from the 598 │ # contents of the file itself to determine its type. The MIMEMagicFile 599 │ # directive tells the module where the hint definitions are located. 600 │ # 601 │ #MIMEMagicFile conf/magic 602 │ 603 │ # 604 │ # Customizable error responses come in three flavors: 605 │ # 1) plain text 2) local redirects 3) external redirects 606 │ # 607 │ # Some examples: 608 │ #ErrorDocument 500 "The server made a boo boo." 609 │ #ErrorDocument 404 /missing.html 610 │ #ErrorDocument 404 "/cgi-bin/missing_handler.pl" 611 │ #ErrorDocument 402 http://www.example.com/subscription_info.html 612 │ # 613 │ 614 │ # 615 │ # MaxRanges: Maximum number of Ranges in a request before 616 │ # returning the entire resource, or one of the special 617 │ # values 'default', 'none' or 'unlimited'. 618 │ # Default setting is to accept 200 Ranges. 619 │ #MaxRanges unlimited 620 │ 621 │ # 622 │ # EnableMMAP and EnableSendfile: On systems that support it, 623 │ # memory-mapping or the sendfile syscall may be used to deliver 624 │ # files. This usually improves server performance, but must 625 │ # be turned off when serving from networked-mounted 626 │ # filesystems or if support for these functions is otherwise 627 │ # broken on your system. 628 │ # Defaults: EnableMMAP On, EnableSendfile Off 629 │ # 630 │ #EnableMMAP off 631 │ #EnableSendfile on 632 │ 633 │ # Supplemental configuration 634 │ # 635 │ # The configuration files in the conf/extra/ directory can be 636 │ # included to add extra features or to modify the default configuration of 637 │ # the server, or you may simply copy their contents here and change as 638 │ # necessary. 639 │ 640 │ # Server-pool management (MPM specific) 641 │ Include conf/extra/httpd-mpm.conf 642 │ 643 │ # Multi-language error messages 644 │ Include conf/extra/httpd-multilang-errordoc.conf 645 │ 646 │ # Fancy directory listings 647 │ Include conf/extra/httpd-autoindex.conf 648 │ 649 │ # Language settings 650 │ Include conf/extra/httpd-languages.conf 651 │ 652 │ # User home directories 653 │ # Django : 2026-02-07 654 │ # default: Include conf/extra/httpd-userdir.conf 655 │ 656 │ # Real-time info on requests and configuration 657 │ # Django : 2026-02-08 658 │ # default: #Include conf/extra/httpd-info.conf 659 │ Include conf/extra/httpd-info.conf 660 │ 661 │ # Virtual hosts 662 │ #Include conf/extra/httpd-vhosts.conf 663 │ 664 │ # Local access to the Apache HTTP Server Manual 665 │ #Include conf/extra/httpd-manual.conf 666 │ 667 │ # Distributed authoring and versioning (WebDAV) 668 │ #Include conf/extra/httpd-dav.conf 669 │ 670 │ # Various default settings 671 │ Include conf/extra/httpd-default.conf 672 │ 673 │ # Configure mod_proxy_html to understand HTML4/XHTML1 674 │ 675 │ Include conf/extra/proxy-html.conf 676 │ 677 │ 678 │ # Django : 2026-02-08 679 │ # default: unset 680 │ 681 │ 682 │ 683 │ SetHandler "proxy:unix:/run/php-fpm/php-fpm.sock|fcgi://localhost/" 684 │ 685 │ 686 │ 687 │ 688 │ # Secure (SSL/TLS) connections 689 │ # Django : 2026-02-09 690 │ # default: #Include conf/extra/httpd-ssl.conf 691 │ Include conf/extra/httpd-ssl.conf 692 │ # 693 │ # Note: The following must must be present to support 694 │ # starting without SSL on platforms with no /dev/random equivalent 695 │ # but a statically compiled-in mod_ssl. 696 │ # 697 │ 698 │ SSLRandomSeed startup builtin 699 │ SSLRandomSeed connect builtin 700 │ 701 │ 702 │ IncludeOptional conf/conf.d/*.conf ─────┴───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────