Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Asterisk Anbindung ans ISDN @voip:asterisk18
- - - - - - - - - - - - - - - - - Module: hfcmulti Options: poll=<number>, pcm=<number>, debug=<number>, tim... - - - - - - - - - - - - - - - - - Module: hfcsusb Options: debug=<number> poll=<number> - - - - - - - - - -... - - - - - - - - - - - - - - - - - - Module: xhfc Options: debug=<number> Port Attributes: mode=(te|nt), li... - - - - - - - - - - - - - - - - Module: mISDN_dsp Options: debug=<number>, options=<number>, poll=<number>,
- Asterisk Grundkonfiguration @voip:asterisk
- vmexten=60 language=de [authentication] [basic-options](!) ; a template dtmfmode=... office type=friend [natted-phone](!,basic-options) ; another template inheriting basic-options nat=yes canreinvite=no host=dynamic [public-phone](!,basic-options) ; another template inheriting basic-options
- Asterisk Grundkonfiguration @voip:asterisk18
- ls vmexten=60 language=de [authentication] [basic-options](!) ; a template dtmfmode=... office type=friend [natted-phone](!,basic-options) ; another template inheriting basic-options nat=yes directmedia=no host=dynamic [public-phone](!,basic-options) ; another template inheriting basic-options
- Asterisk Anbindung ans ISDN @voip:asterisk
- - - - - - - - - - - - - - - - - Module: hfcmulti Options: poll=<number>, pcm=<number>, debug=<number>, tim... - - - - - - - - - - - - - - - - - Module: hfcsusb Options: debug=<number> poll=<number> - - - - - - - - - -... - - - - - - - - - - - - - - - - - - Module: xhfc Options: debug=<number> Port Attributes: mode=(te|nt), li... - - - - - - - - - - - - - - - - Module: mISDN_dsp Options: debug=<number>, options=<number>, poll=<number>,
- misdn-init.conf @voip:asterisk
- t that should be considered # te_ptmp=1 # # Port Options # # Syntax: option=<port_number>,<option>[,<optio... crc4 #option=3,optical,los,ais,slip # # General Options for your hfcmulti hardware # # poll=<number> # # ... Enable debugging (see hfc_multi.h for debug options). # # dsp_options=<number> # # set this to 2 and you'll have software bridging instead of #
- Asterisk installieren @voip:asterisk18
- ecording.gsm /var/lib/asterisk/sounds/en/followme/options.gsm /var/lib/asterisk/sounds/en/followme/pls-hold... c/z_p.gsm /var/lib/asterisk/sounds/en/priv-callee-options.gsm /var/lib/asterisk/sounds/en/priv-callpending.... ext.gsm /var/lib/asterisk/sounds/en/screen-callee-options.gsm /var/lib/asterisk/sounds/en/seconds.gsm /var/... s/en/vm-onefor.gsm /var/lib/asterisk/sounds/en/vm-options.gsm /var/lib/asterisk/sounds/en/vm-opts-full.gsm
- Einrichten von Asterisk 14.x unter CentOS7 @voip:c7:asterisk14
- sion.so /usr/lib64/asterisk/modules/res_pjsip_dlg_options.so /usr/lib64/asterisk/modules/res_pjsip_dtmf_inf... s/peers sip qualify peer -- Send an OPTIONS packet to a peer sip reload -... ptl show config -- Show UDPTL config options ulimit -- Set or show pro... --- Version: 14.2.1 Build Options: LOADABLE_MODULES Maximum calls:
- Installation von Asterisk
- unter dem Menüpunkt **__---> 9. Voicemail Build Options__** den Punkt **__[*] 1. ODBC_STORAGE__** aus: <
- Installation und Konfiguration von mISDN
- layermask=0xf /sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=128 dtmfthreshold=100 [i] creating device