Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Passende Seitennamen:
Volltextergebnisse:
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- by users, and by a larger number of services that run in the background. Postfix servi... ces are implemented by daemon processes. These run in the back‐ ground under control of the m... local(8), pipe(8) or spawn(8) services, or run the server under control by inetd(8) or equivalen... (8) daemons. Although the proxymap(8) server can run chrooted, doing so defeats most of
- Grundinstallation von AMaViS unter CentOS 7.x @centos:mail_c7
- -new-2.9.1/test-messages/sample.tar.gz.compl /var/run/amavisd /var/run/clamd.amavisd /var/spool/amavisd /var/spool/amavisd/db /var/spool/amavisd/quarantine ... etc/amavisd/amavisd-milter.conf># User to run under (must be same as amavisd daemon) AMAVIS_USE... ket. # Django : 2014-11-18 # default: SOCKET=/var/run/amavisd/amavisd-milter.sock SOCKET=inet:8899@10.0
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- multiple commands -h HOST Specify server (/var/run/chrony/chronyd.sock,127.0.0.1,::1) -p PORT Spec... hronyc> will be displayed when it is being run from a terminal. If chronyc's input or output are... main socket. The compiled-in default path is /var/run/chrony/chronyd.sock. If that fails (e.g. because ... a fallback. The default value is /var/run/chrony/chronyd.sock,127.0.0.1,::1, i.e. the host
- Remote Access mit NX NoMachine unter CentOS 6.x @centos
- ripts/nxreplace /usr/share/doc/nx-3.5.0/nxscripts/run-nxagent /usr/share/doc/nx-3.5.0/nxscripts/run-nxagent-client /usr/share/doc/nx-3.5.0/nxscripts/run-nxagent-full /usr/share/doc/nx-3.5.0/nxscripts/run-nxagent-nxfs /usr/share/doc/nx-3.5.0/nxscripts/run-
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- rvice to other computers. A typical set-up is to run 'chronyd' on a gateway computer that has a ... the top level info directory listing, you need to run the 'install-info' command manually after this st... rvers, you need to set up a configuration file to run chrony. The (compiled-in) default location for t... as a dial-up connection. It assumes that Linux is run exclusively on the computer. Dual-boot syste
- ISC BIND Nameserver unter CentOS 7.x @centos
- rndc.key /etc/rwtab.d/named /etc/sysconfig/named /run/named /usr/lib/systemd/system/named-setup-rndc.se... amed/chroot/etc/pki/dnssec-keys /var/named/chroot/run /var/named/chroot/run/named /var/named/chroot/usr /var/named/chroot/usr/lib64 /var/named/chroot/usr/li... /var/named/chroot/var/named /var/named/chroot/var/run /var/named/chroot/var/tmp</code> === bind-utils =
- Installation und Konfiguration von ClamAV @centos:mail_c6
- av /var/log/clamav /var/log/clamav/clamd.log /var/run/clamav </code> ===== Konfiguration ===== ==== c... gainst # running clamd multiple times (if want to run another clamd, please # copy the configuration file, change the LogFile variable, and run # the daemon with --config-file option). # This o... n (main thread). # Default: disabled PidFile /var/run/clamav/clamd.pid # Optional path to the global t
- Installation und Konfiguration von ClamAV für AMaViS unter CentOS 7.x @centos:mail_c7
- rm running Immunet 3.0, powered by ClamAV. If you run Windows systems in your environment and need an ... You may need to run 'ldconfig' after installing this version. ** Thi... ** Important note **: please run 'ldconfig' after installing this version. -- The... e UTF16 encoded files) + New options: --diff, --run-cdiff, --verify-cdiff (update script management)
- Logdatenanalyse mit graylog v2 unter CentOS 7.x @centos:web_c7
- ongos.1.gz /var/lib/mongodb /var/log/mongodb /var/run/mongodb</code> ==== Elasticsearch ==== Im nächst... var/lib/elasticsearch /var/log/elasticsearch /var/run/elasticsearch</code> ==== graylog ==== Zu guter ... Process: 1774 ExecStart=/usr/bin/mongod $OPTIONS run (code=exited, status=0/SUCCESS) Main PID: 1776 (... ─1776 /usr/bin/mongod --quiet -f /etc/mongod.conf run Feb 15 18:48:08 vml000117.dmz.nausch.org systemd
- Installation des Mailinglistenservers Mailman unter CentOS 7.x @centos:mail_c7
- lman/spam /var/lock/mailman /var/log/mailman /var/run/mailman /var/spool/mailman </code> ==== Mailman ... lman/spam /var/lock/mailman /var/log/mailman /var/run/mailman /var/spool/mailman </code> ===== REDHAT ... in /var/lock/mailman, the pid file is in /var/run/mailman, qfiles are in /var/spool/mailman, an... mailman datafiles, it is contrib/migrate-fhs, run with -h for help information. The mappin
- Logfileanalyse und -Auswertung mit (Better-)AWStats unter CentOS 6.x @centos
- p postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true ... ry. # This parameter is used only when AWStats is run from command line # with -output option (to gener... hen "update" is # made from a browser, AWStats is run as a CGI by the web server user defined # in your... hen set to 0, update is only made when AWStats is run from the command # line interface (or a task sche
- Cacti Installation und Grundkonfiguration unter CentOS 6.x @centos:cacti_c6
- ',120,'',500,'','100','','0','','processes in the run queue','0','on','','on','',2,'','','0','','','on'... ',120,'',500,'','100','','0','','processes in the run queue','0','on','','on','',2,'','','0','','','on'... 0,'0',500,'0','100','0','0','0','processes in the run queue','0','on','0','on','0',2,'0','','0','','0',... gnore all other signals */ } } /* do NOT run this script through a web browser */ if (!isset($
- Remote Access mit NX NoMachine @centos
- ripts/nxreplace /usr/share/doc/nx-3.2.0/nxscripts/run-nxagent /usr/share/doc/nx-3.2.0/nxscripts/run-nxagent-client /usr/share/doc/nx-3.2.0/nxscripts/run-nxagent-full /usr/share/doc/nx-3.2.0/nxscripts/run-nxagent-nxfs /usr/share/doc/nx-3.2.0/nxscripts/run-
- SKS Keyserver unter CentOS 6.x @centos
- cter. This is particularly useful if you want to run your webserver off of port 80. This can be done ... iles from which the database is to be built. - Run sks_build.sh. That script actually runs three ut... space usage. At the current settings, you could run out of ram if you try this with less then 256... s. -stat_hour Hour at which to run database statistics. -initial_stat
- Logdatenanalyse mit graylog unter CentOS 7.x @centos:web_c7
- ongos.1.gz /var/lib/mongodb /var/log/mongodb /var/run/mongodb</code> ==== Elasticsearch ==== Im nächst... var/lib/elasticsearch /var/log/elasticsearch /var/run/elasticsearch</code> ==== graylog ==== Zu guter l... 23784 /usr/bin/mongod --quiet -f /etc/mongod.conf run Dec 23 11:05:52 vml000117.dmz.nausch.org systemd... 2.630+0100 [initandlisten] options: { command: [ "run" ], config: "/etc/mongod.conf", net: { bindIp: "1
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Grundinstallation und Konfiguration @centos:mail_c7:php7
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- PXE-Server unter CentOS 7.x erweitern - Anwendungsbeispiel: Festplatten sicher löschen mit DBAN @centos:pxe_c7
- MySQLDumper unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- phpMyAdmin 4.7 unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Basiskonfiguration @centos:mail_c7:php7
- Der Cyrus Hochleistungs-Mailserver mit Unterstützung für IMAP und SIEVE unter CentOS 6.x @centos:mail_c6
- Einbinden der Wetterdaten der Davis Vantage Pro2 in das Webcam-Bild der Mobotix M25 (HD-Cam) @wetter:mobotix
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible