start

Suche

Unten sind die Ergebnisse Ihrer Suche gelistet.

NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
289 Treffer, Zuletzt geändert:
chronyc is a command-line interface program which can be used to monitor chronyd's performance and to c... not be shown. There are two ways chronyc can access chronyd. One is the Internet Protocol (IPv... m which chronyd will accept these commands can be configured with the cmdallow directive in the ... obtained from reverse DNS lookups and can be different from the specified hostnames.
TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
86 Treffer, Zuletzt geändert:
he authenticity of host 'vml172042 (172.17.2.42)' can't be established. ED25519 key fingerprint is SHA2... he authenticity of host 'vml172042 (172.17.2.42)' can't be established. ED25519 key fingerprint is SHA2... man sich ja nun wie folgt ermitteln: $ ssh-keyscan -t ed25519 vml172042 <code># vml172042:22 SSH-2.0... haben diesen mit Hilfe des Programms **''ssh-keyscan''** ermittelt der ja on-the-fly eine Verbindung z
Formatting Syntax @wiki
45 Treffer, Zuletzt geändert:
erlined__ and ''monospaced'' texts. Of course you can **__//''combine''//__** all these. DokuWiki su... lined__ and ''monospaced'' texts. Of course you can **__//''combine''//__** all these. You can use <sub>subscript</sub> and <sup>superscript</sup>, too. You can use <sub>subscript</sub> and <sup>superscript</su
StormForce XR - Installation und Konfiguration unter CentOS 7.x @wetter:boltek
42 Treffer, Zuletzt geändert:
ero) has been made more efficient - it no longer scans grid which don't have any strikes in them and th... optional dependency. The graphing update period can be changed using it's "UpdatePeriodGraphs" XML se... ke summary grouped per minute. 4. (C) Mini client can now show the strikes per minute. 5. (S) Some impo... left behind - now cleaned up. 6. (C) Mini client can now list storms TRAC is monitoring. v0.3.0 - 19t
SNMP (unter CentOS 6.x) @centos:cacti_c6
37 Treffer, Zuletzt geändert:
other ways of configuring # the agent so that you can change the community names, and give # yourself w... nmpd will print each incoming # connection, which can be useful for debugging. dontLogTCPWrappersConne... ############### # Executables/scripts # # # You can also have programs run by the agent that return a... #################### # disk checks # # The agent can check the amount of available disk space, and mak
DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen @linux
23 Treffer, Zuletzt geändert:
stalled Size : 22.61 MiB Packager : Robin Candau <antiz@archlinux.org> Build Date : Tue 28... rtbeat.json kea /usr/share/kea/api/ha-maintenance-cancel.json kea /usr/share/kea/api/ha-maintenance-not... fetime": 3600, // Many additional parameters can be specified here: // - option definitions (i... // - ddns information (how the DHCPv4 component can reach a DDNS daemon) // // Some of them h
Dovecot, Nachrichten auf dem Server mit SIEVE filtern @centos:mail_c7
19 Treffer, Zuletzt geändert:
clients that are focused on CMU's timesieved you can # specify the IMPLEMENTATION capability that Do... ison. Multiple script # file or directory paths can be specified by appending an increasing number. ... ct!). Multiple script file or # directory paths can be specified by appending an increasing number. ... at are not available # by default. This setting can use '+' and '-' to specify differences relative
Fax-Server mit HylaFAX+ unter CentOS 6.x @centos
18 Treffer, Zuletzt geändert:
ifferent libiax2 or spandsp version then iaxmodem can be statically linked to the libraries after build... ith dynamic libraries, make sure that your linker can find these libraries by having a line in your /et... like this: # ./build -bsdptys Alternatively you can build IAXmodem with static linking by running the... " entry refers to the preferred audio codec. This can be "slinear", "ulaw", or "alaw". The "record" e
Konfiguration von wetter.cgi @wetter:ws500
18 Treffer, Zuletzt geändert:
50; # If you secifies sensor type TH above, you can say here which T/H sensors # should be displayed ... st *** # Some options that can be used to display data that is calculated from t... the right side is a list of logical names # that can be calculated like WindChill and Dewpoint. # The ... it{"1"}="H"; # For rain and pressure sensors you can activate the trendData display. Doing this # show
Options Menü @wetter:wx
12 Treffer, Zuletzt geändert:
unter Umständen hilfreich bei Aufzeichnungen von Scannern sein, um so die Burst-PLL bei Meteor und Resu... ei auszugleichen. Bei schamlbandigen Empfängern (Scannern) oder bei Signalen mit geringen Signal-/Rausc... pfängern ohne Squelchfunktion am Audioausgang (//Scannern//). == sound trigger level == Die Aufnahme er... urde. Generell sollte das Steuerungsprogramm den Scan-Mode benutzen). Folgende Receivertypen stehen zur
IV) Konfiguration von wview @wetter:wview
10 Treffer, Zuletzt geändert:
wviewsshd[12832]: <1343851712082> : sshUtilsInit: cannot locate rsync - is it installed? Aug 1 22:08:3... rting wview for the first time so the Vantage Pro can become consistent with the new settings... In th... rting wview for the first time so the Vantage Pro can become consistent with the new settings... In th... - MySQL server user for export acivity (can be same as db_admin)." echo "" echo "
VDR Installation @vdr
9 Treffer, Zuletzt geändert:
Jul 12 20:01:15 vdr vdr: [12826] video directory scanner thread started (pid=12825, tid=12826) Jul 12 20:01:15 vdr vdr: [12827] video directory scanner thread started (pid=12825, tid=12827) Jul 12 2... Jul 12 20:01:15 vdr vdr: [12827] video directory scanner thread ended (pid=12825, tid=12827) Jul 12 20:... Jul 12 20:01:15 vdr vdr: [12826] video directory scanner thread ended (pid=12825, tid=12826) Jul 12 20:
Ansible @linux:ansible
9 Treffer, Zuletzt geändert:
o be installed on remote nodes. Extension modules can be written in any language and are transferred to... ocs.ansible.com. IRC and mailing list info can be found in file CONTRIBUTING.md, available in: h... t package. Note that setting allow_downgrade=True can make this module behave in a non-idempote... dencies between the downgraded package and others can cause changes to the packages which were
Einrichten von Asterisk 14.x unter CentOS7 @voip:c7:asterisk14
8 Treffer, Zuletzt geändert:
# the key prior to enabling the repositorys, this can by done by # running: # rpm --import https://ast.... : does voice over IP in three protocols, and can interoperate with : almost all standa... terisk does voice over IP in three protocols, and can interoperate with almost all standards-based tele... sl.so /usr/lib64/libasteriskssl.so.1 /usr/sbin/astcanary /usr/sbin/astdb2sqlite3 /usr/sbin/asterisk /us
Cacti Installation und Grundkonfiguration unter CentOS 6.x @centos:cacti_c6
6 Treffer, Zuletzt geändert:
mages/button_add.gif /var/www/cacti/images/button_cancel.gif /var/www/cacti/images/button_cancel2.gif /var/www/cacti/images/button_clear.gif /var/www/cacti/... | | This program is free software; you can redistribute it and/or | | modify it u... | | This program is free software; you can redistribute it and/or | | modify it u
File @wetter:wx
6 Treffer, Zuletzt geändert:
Fax-Server mit HylaFAX+ unter CentOS5 @voip:fax
4 Treffer, Zuletzt geändert:
Asterisk Anbindung ans ISDN @voip:asterisk
3 Treffer, Zuletzt geändert:
Das Perl-Scriptchen @wetter:ws500
3 Treffer, Zuletzt geändert:
Installation und Konfiguration von mISDN @voip
3 Treffer, Zuletzt geändert:
Software - WXtoImg @wetter:wx
2 Treffer, Zuletzt geändert:
Help @wetter:wx
2 Treffer, Zuletzt geändert:
Softphone ZOIPER @voip
1 Treffer, Zuletzt geändert:
I) Linux-System Vorbereitung(en) @wetter:wview
1 Treffer, Zuletzt geändert:
II) Installation von radlib @wetter:wview
1 Treffer, Zuletzt geändert:
Asterisk-Repository einbinden @voip:asterisk18
1 Treffer, Zuletzt geändert:
deutsche Sprachprompts für Asterisk @voip:asterisk
1 Treffer, Zuletzt geändert:
  • start.txt
  • Zuletzt geändert: 31.10.2023 18:17.
  • von 127.0.0.1