start

Suche

Unten sind die Ergebnisse Ihrer Suche gelistet.

Postfix, der sichere Mailserver (MTA) unter CentOS 7.x
337 Treffer, Zuletzt geändert:
imits must not be changed. Command name + arguments The command to be executed. Characters that are special to the shell ... guments containing whitespace. The command name is relative to the Postfix daemon directory ... tory configuration variable). The command argument syntax for specific commands is speci
Mailserver - Logfileauswertungen unter CentOS 7.x
190 Treffer, Zuletzt geändert:
accurate. --mailq Run "mailq" command at end of report. Mere... o "Improper use of SMTP command pipelining" report.) -q q... ecially errors while parsing # the command line and errors while accessing the Postfix main.... 6E', barenewline => '793C2E', command => '47231B', hangup => '
Installation des Mailinglistenservers Mailman unter CentOS 7.x
135 Treffer, Zuletzt geändert:
ailman/Cgi/subscribe.pyo /usr/lib/mailman/Mailman/Commands /usr/lib/mailman/Mailman/Commands/__init__.py /usr/lib/mailman/Mailman/Commands/__init__.pyc /usr/lib/mailman/Mailman/Commands/__init__.pyo /usr/lib/mailman/Mailman/Commands/cmd_confirm
Installation und Konfigurationsdateien von Postfix 3 unter CentOS 7.x
72 Treffer, Zuletzt geändert:
n als "disconnect from name[addr] ehlo=1 auth=0/1 commands=1/2" protokolliert, was bedeutet, dass der Clien... mat # of the file, see the master(5) manual page (command: "man 5 master" or # on-line: http://www.postfix.... ice type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (no) (n... arameter # list, see the postconf(5) manual page (command: "man 5 postconf"). # # For common configuration
Installation und Konfigurationsdateien von Postfix unter CentOS 7.x
68 Treffer, Zuletzt geändert:
il_c7:mta_1?&#master"> master(5) manual page</a> (command: &quot;man 5 master&quot; or</span> <span class="... ice type private unpriv chroot wakeup maxproc command + args</span> <span class="co0"># (... # list, see the postconf(5) manual page (command: "man 5 postconf"). # ... ese documents, use # the command "postconf html_directory readme_directory", or go
Postscreen - Schutz vor Überbelastung und SPAM-Abwehr
44 Treffer, Zuletzt geändert:
(Message Size Declaration) RFC 1985 (ETRN command) RFC 2034 (SMTP Enhanced Status Codes) ... 2920 (SMTP Pipelining) RFC 3207 (STARTTLS command) RFC 3461 (SMTP DSN Extension) RFC ... processes may run for several hours. Use the command "postfix reload" after a configuration cha... string. COMPATIBILITY CONTROLS postscreen_command_filter ($smtpd_command_filter) A me
Konfiguration unseres MTAs Postfix 2.11 unter CentOS7
42 Treffer, Zuletzt geändert:
iger Pfad zu allen postXXX-Programmen. # default: command_directory = /usr/sbin command_directory = /usr/sbin # Django : 2014-10-31 Vollständiger Pfad zum Verzeich... gger-Befehlszeile # Die Option "debugger_command" definiert den kompletten Debug-Aufruf, # ... rationsverzeichnis abgespeichert wird. # debugger_command = PATH=/bin:/usr/bin:/usr/local/bin; e
Konfiguration unseres MTAs Postfix 3.x unter CentOS 7
39 Treffer, Zuletzt geändert:
iger Pfad zu allen postXXX-Programmen. # default: command_directory = /usr/sbin command_directory = /usr/sbin # Django : 2019-01-27 Vollständiger Pfad zum Verzeich... gger-Befehlszeile # Die Option "debugger_command" definiert den kompletten Debug-Aufruf, # ... rationsverzeichnis abgespeichert wird. # debugger_command = PATH=/bin:/usr/bin:/usr/local/bin; e
Installation und Konfiguration von ClamAV für AMaViS unter CentOS 7.x
29 Treffer, Zuletzt geändert:
a flexible and scalable multi-threaded daemon, a command line scanner, and a tool for automatic updating v... in clamd.conf (DisableCertCheck) or the command-line (nocerts). ... ion to these options across the suite. Some command line switches of clamscan have been renamed ... s the new logic in scan limits which affects some command line and config options of clamscan and clamd. Pl
DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x
22 Treffer, Zuletzt geändert:
nchronous resolver library, you can use the "-T" command line option to change the timeout so that it is s... s4all and Netease. It expects filenames on the command line, each of which contains a mail message, but ... se failure reports. It expects file names on the command line, or if no arguments, it reads stdin. It need... aware MTA. Most, if not all, of the command line options listed below can also be set using a
Horde Framework 5 unter CentOS 7.x - Grundinstallation und Konfiguration
21 Treffer, Zuletzt geändert:
that PHP uses to find PEAR packages. Run the command:: pear config-show You will see somethi... ies. To install, enter the following at the command prompt:: pear install Net_DNS2 b. Se... age. To install, enter the following at the command prompt:: pear install Services_Weather ... lock. To install, enter the following at the command prompt:: pear install File_Fstab This
Grundinstallation von AMaViS unter CentOS 7.x
17 Treffer, Zuletzt geändert:
S}" ### http://www.centralcommand.com/ ['CentralCommand Vexira (new) vascan', ['vascan','/usr/lib/Vexira/vascan'], "-a s --timeout... # old Avira AntiVir 2.x (ex H+BEDV) or old CentralCommand Vexira Antivirus ['Avira AntiVir', ['antivir','... ?)(?: ; |$)/m ], ### http://www.commandsoftware.com/ ['Command AntiVirus for Linux', 'c
TLS-Verbindungen, verschlüsselte Kommunikation für Postfix 3.x unter CentOS 7
16 Treffer, Zuletzt geändert:
ssociated trust SYNOPSIS update-ca-trust [COMMAND] DESCRIPTION update-ca-trust(8) is used t... The output is produced using the update-ca-trust command (without parameters), or using the update-ca-trust extract command. In order to produce the output, a flexibl... necessary to run the update-ca-trust extract command, in order to update the consolidated files
nützliche Kommandos rund um Dovecot
16 Treffer, Zuletzt geändert:
ting and a protocol specific setting. The second command uses also the -h option, in order to hi... ity SYNOPSIS doveadm [-Dv] [-f formatter] command [command_options] [command_arguments] DESCRIPTION doveadm is the Dovecot administration tool. It can be use
Dovecot, "der" IMAP-Server unter CentOS 7.x
15 Treffer, Zuletzt geändert:
Show the mailboxes under this namespace with LIST command. This makes the # namespace visible for clients... list indexes can be used to optimize IMAP STATUS commands. They are # also required for IMAP NOTIFY extens... eads. #mail_cache_min_mail_count = 0 # When IDLE command is running, mailbox is checked once in a while to... # Maildir-specific settings ## # By default LIST command returns all entries in maildir beginning with a d
Dovecot, Nachrichten auf dem Server mit SIEVE filtern
15 Treffer, Zuletzt geändert:
Dovecot, Quotas - Speicherquoten für User und Maildomains
14 Treffer, Zuletzt geändert:
Webmail mit Roundcube unter CentOS 7.x
6 Treffer, Zuletzt geändert:
SRS - Sender Rewriting Scheme unter CentOS 7.x
5 Treffer, Zuletzt geändert:
Horde 5 WebMail Applikation: IMP unter CentOS 7.x
4 Treffer, Zuletzt geändert:
Backup-Mailserver mit Postfix 3.x unter CentOS 7
3 Treffer, Zuletzt geändert:
virtuelle(r) Mailserver unter Postfix 3.x und CentOS 7
3 Treffer, Zuletzt geändert:
Header und Bodychecks mit Postfix 2.11.3 unter CentOS 7.x
3 Treffer, Zuletzt geändert:
virtuelle(r) Mailserver unter Postfix 2.11. und CentOS 7
3 Treffer, Zuletzt geändert:
Backup-Mailserver mit Postfix 2.11 unter CentOS7
3 Treffer, Zuletzt geändert:
Dovecot, Authentifizierung(en)
2 Treffer, Zuletzt geändert:
erweiterte gewichtete Prüfungen mittels policyd-weight
2 Treffer, Zuletzt geändert:
SPAM-Abwehr mit Hilfe von Greylisting
1 Treffer, Zuletzt geändert:
SASL-Authentifizierung beim Postfix MTA 2.11 unter CentOS 7
1 Treffer, Zuletzt geändert:
Horde 5 Applikation Passwortänderungen: Passwd unter CentOS 7.x
1 Treffer, Zuletzt geändert:
Spamassassin für AMaViS unter CentOS 7.x
1 Treffer, Zuletzt geändert:
DKIM - Domain Key Identified Mail unter CentOS 7.x
1 Treffer, Zuletzt geändert:
SPF - Sender Policy Framework (unter CentOS 7.x)
1 Treffer, Zuletzt geändert:
Horde 5 Applikation Kalender: Kronolith unter CentOS 7.x
1 Treffer, Zuletzt geändert:
Basiskonfiguration des Frameworks Horde 5 unter CentOS 7.x
1 Treffer, Zuletzt geändert:
OPENPGP DNS & Milter
1 Treffer, Zuletzt geändert:
Absichern des Frameworks, entfernen nicht nötiger CLI's
1 Treffer, Zuletzt geändert:
  • start.txt
  • Zuletzt geändert: 31.10.2023 18:17.
  • von 127.0.0.1