Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Einrichten von Asterisk 14.x unter CentOS7 @voip:c7:asterisk14
- nc_talkdetect.so /usr/lib64/asterisk/modules/func_timeout.so /usr/lib64/asterisk/modules/func_uri.so /us... pthread.so /usr/lib64/asterisk/modules/res_timing_timerfd.so /usr/lib64/libasteriskssl.so /usr/lib64/lib... usr/share/doc/asterisk-14.2.1/configs/samples/ss7.timers.sample /usr/share/doc/asterisk-14.2.1/configs/s... 000 Minimum free memory: 0 MB Startup time: 19:27:13 Last reload time:
- Fax-Server mit HylaFAX+ unter CentOS5 @voip:fax
- cover page (relative to /var/spool/hylafax) []? Timeout when converting PostScript documents (secs) [1... a destination [1]? Define a group of modems []? Time of day restrictions for outbound jobs ["Any"]? Timeout before purging a stale UUCP lock file (secs) [3... al port that modem is connected to []? modem Ok, time to setup a configuration file for the modem. The
- Asterisk erster Wählplan @voip:asterisk18
- ority 1 to app_queue_gosub_virtual_context -- Time to scan old dialplan and merge leftovers back into the new: 0.000149 sec -- Time to restore hints and swap in new dialplan: 0.000001 sec -- Time to delete the old dialplan: 0.000019 sec -- Total time merge_contexts_delete: 0.000169 sec</code> Mit de
- cdr.conf @voip:asterisk
- Default is 100. ;size=100 ; Define the maximum time to accumulate CDRs in the buffer before posting them ; to the backend engines. If this time limit is reached, then it will post the ; records... ize'. 'batch' must be set to ; 'yes'. Note that time is in seconds. Default is 300 (5 minutes). ;time=300 ; The CDR engine uses the internal asterisk sche
- Asterisk Anbindung ans ISDN @voip:asterisk18
- ons: poll=<number>, pcm=<number>, debug=<number>, timer=(yes|no) - - - - - - - - - - - - - - - - - - - -... <mISDNconf> <module poll="128" debug="0" timer="no">hfcmulti</module> <module debug="0"... lemented) == Everyone is busy/congested at this time (1:0/0/1) -- Executing [08936046666@default:2... ons: poll=<number>, pcm=<number>, debug=<number>, timer=(yes|no) - - - - - - - - - - - - - - - - - - - -
- Asterisk erster Wählplan @voip:asterisk
- 700' priority 1 to parkedcalls (0xa3a9248) -- Time to scan old dialplan and merge leftovers back into the new: 0.000041 sec -- Time to restore hints and swap in new dialplan: 0.000001 sec -- Time to delete the old dialplan: 0.000008 sec -- Total time merge_contexts_delete: 0.000050 sec</code> Mit de
- Asterisk Grundkonfiguration @voip:asterisk
- es Overlap dial : No DTMFmode : rfc2833 Timer T1 : 500 Timer B : 32000 ToHost : Addr->IP : 192.168.1.61 Port 5060 Defadd... 60;line=6xwyo7k7 Qualify Freq : 60000 ms Sess-Timers : Accept Sess-Refresh : uas Sess-Expires :
- MySQL-Datenbankdefinitionen @voip:asterisk
- dir` varchar(4) NOT NULL default 'yes', `stamp` timestamp NOT NULL default CURRENT_TIMESTAMP on update CURRENT_TIMESTAMP, PRIMARY KEY (`uniqueid`), KEY `mailbox_context` (`mailbox`,`cont
- Asterisk Grundkonfiguration @voip:asterisk18
- es Overlap dial : No DTMFmode : rfc2833 Timer T1 : 500 Timer B : 32000 ToHost : Addr->IP : 192.168.10.51:5061 Defaddr->I... cc;transport=UDP Qualify Freq : 60000 ms Sess-Timers : Accept Sess-Refresh : uas Sess-Expires :
- Asterisk Anbindung ans ISDN @voip:asterisk
- ons: poll=<number>, pcm=<number>, debug=<number>, timer=(yes|no) - - - - - - - - - - - - - - - - - - - -... <mISDNconf> <module poll="128" debug="0" timer="no">hfcmulti</module> <module debug="0"
- misdn-init.conf @voip:asterisk
- the dsp_poll is dependant on # the kernel timer setting which can be found in the CPU section # ... the sensitivity of the dtmf tone recognizer. # # timer=<1|0> # # set this to 1 if you want hfcmu
- Asterisk-Repository einbinden @voip:asterisk
- s for libpri libresample.i386 : libresample, Real-time library interface by Dominic Mazzoni libresample-
- Wählplanerweiterungen für die ISDN-Anbindungen @voip:asterisk18
- rxgain=0 txgain=0 te_choose_channel=no l1watcher_timeout=0 pmp_l1_check=no reject_cause=16 need_more_in
- Asterisk installieren @voip:asterisk18
- es/func_sysinfo.so /usr/lib/asterisk/modules/func_timeout.so /usr/lib/asterisk/modules/func_uri.so /usr/
- Asterisk-Repository einbinden @voip:asterisk18
- s for libpri libresample.i386 : libresample, Real-time library interface by Dominic Mazzoni libresample-
127.0.0.1