Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Dovecot, Nachrichten auf dem Server mit SIEVE filtern @centos:mail_c7
- the user's main active script. If ManageSieve is used, this the # location of the symbolic link contr... ONLY available in global scripts. This # can be used to restrict the use of certain Sieve extensions t... e plugins of its own. Using this # setting, the used plugins can be specified. Check the Dovecot wiki ... e :detail part is right. This setting # is also used by Dovecot's LMTP service. #recipient_delimiter
- Fax-Server mit HylaFAX+ unter CentOS 6.x
- ries, it is recommended that the versions here be used for iaxmodem if only for the reason that these ve... rver. (However, the actual refresh value that is used will be negotiated between IAXmodem and the Aster... inittab <file bash /etc/inittab># inittab is only used by upstart for the default runlevel. # # ADDING O... d initctl(8). # # Default runlevel. The runlevels used are: # 0 - halt (Do NOT set initdefault to this
- SNMP (unter CentOS 6.x) @centos:cacti_c6
- Simple Network Management Protocol) is a protocol used for network management. The NET-SNMP project incl... anual page # as well as the local/passtest script used in the above example. ##########################... anual page # as well as the local/passtest script used in the above example. ##########################... The transport domain that should be used for a certain application type unless something e
- Cacti Installation und Grundkonfiguration unter CentOS 6.x @centos:cacti_c6
- e data gathering. There is SNMP support for those used to creating traffic graphs with MRTG. /etc/cron.d... d6e6e675',0,0,3,'','0','','0','',600,'',1,'','hdd_used','',0); INSERT INTO data_template_rrd VALUES (5,'... 0,36,'','100000000000','','0','',600,'',1,'','dir_used','',0); INSERT INTO data_template_rrd VALUES (44,... 15f6fcc',0,0,37,'','0','','0','',600,'',1,'','hdd_used','',0); INSERT INTO data_template_rrd VALUES (76,
- DHCP-Server Konfigurieren unter CentOS 7.x
- gateway 220.177.244.7). Declarations are used to describe the topology of the network, to descr... per-subnet basis, the group declaration can be used. For every subnet which will be served, a... site-wide requirement that 8-bit subnet masks be used, but a department with a single physical ... ions and conditional declarations may be used to group parameter assignments based on informati
- SPF - Sender Policy Framework (unter CentOS 7.x) @centos:mail_c7
- y root) # # Default: smfs # #User smfs # Socket used to communicate with Sendmail daemon # # Default:
- SRS - Sender Rewriting Scheme unter CentOS 7.x @centos:mail_c7
- stem and CMake to build. Optionally, help2man is used to create a manual page. For convenie... pen relay! Each line of `/etc/postsrsd.secret` is used as secret. The first secret is used for signing and verification, the others for verification only. Po... et # Local ports for TCP list. # These ports are used to bind the TCP list for postfix. If you change #
- SRS - Sender Rewriting Scheme @centos:mail_c6
- et # Local ports for TCP list. # These ports are used to bind the TCP list for postfix. If you change #
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- usr/bin:/usr/local/sbin:/usr/sbin # The strategy used for options in the default sshd_config shipped wi... MBER # # Specifies which address family should be used by sshd(8). Valid arguments # are ''any'', ''inet... ) should listen on. The following # forms may be used: # ListenAddress host|IPv4_addr... # Specifies a file containing a private host key used by SSH. The default # is /etc/ssh/ssh_host_key f
- Secure Shell - ssh unter CentOS 7.x
- methods depending on the protocol ver‐ sion used (see below). If command is specified, it is... nections). The compression algorithm is the same used by gzip(1), and the “level” can be c... channel, and the application protocol is then used to determine where to connect to from ... etting. However, an explicit bind_address may be used to bind the connection to a specific
- SASL-Authentifizierung beim Postfix MTA 2.11 unter CentOS 7 @centos:mail_c7
- this userdb socket by default. It's typically # used by dovecot-lda, doveadm, possibly imap process, e
- Installation und Konfiguration von ClamAV @centos:mail_c6
- irectories matching regex # This directive can be used multiple times # Default: scan all #ExcludePath ^... de a specific PUA category. This directive can be used multiple times. # See http://www.clamav.net/suppo... de a specific PUA category. This directive can be used multiple # times. # Default: Load all categories ... table Executable - it's an executable file format used # in all 32 and 64-bit versions of Windows operat
- Grundinstallation von AMaViS @centos:mail_c6
- s[14168]: Internal decoder for .gz (backup, not used) Jun 10 19:00:25 vml000060 amavis[14168]: Found d... R} = $TEMPBASE; # environment variable TMPDIR, used by SA, etc. $QUARANTINEDIR = "/var/virusmails"; #... n not be disabled. # If $QUARANTINEDIR is not used, then another directory must be specified # t
- Grundabsicherung von Postfix @centos:mail_c6
- result, an indexed file in dbm or db format, is used for # fast searching by the mail syst... Note: The "521" response should be used only # with botnets and othe... , only the last action # will be used. # # This feature is not part ... eded # when the same access table is used for client, helo, # sender, or recipient
- DMARC - Domain-based Message Authentication, Reporting & Conformance @centos:mail_c6
- returned by the gethostname(3) function) will be used. AuthservIDWithJobID (Boolean) ... st is made, they address(es) are used in a To: field. There is no default. For... Sets the value of the From: field to be used when sending forensic reports (see ... ich records are written that can be used to generate DMARC aggregate reports. Record
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- phpMyAdmin 4.7 unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Der Cyrus Hochleistungs-Mailserver mit Unterstützung für IMAP und SIEVE unter CentOS 6.x @centos:mail_c6