Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- small number of (mostly) client com‐ mands that are invoked by users, and by a larger number of services that run in the background. Postfix s... ical line starts with non-whitespace text. A line that starts with whitespace continues ... Where applicable a field of "-" requests that the built-in default value be used. For bo
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- p is to run 'chronyd' on a gateway computer that has a dial-up link to the Internet, and use ... tting behind the gateway. The IP addresses that can act as clients of 'chronyd' can be tight... tly controlled. The default is just the computer that 'chronyd' itself is running on. ... ccasionally used to check details of the protocol that the RFC did not make absolutely clear. The core
- DHCP-Server Konfigurieren unter CentOS 7.x @centos
- s on the net‐ work, to provide addresses that can be assigned to clients, or to apply a group o... t declaration, which tells dhcpd how to recognize that an address is on that subnet. A subnet declaration is required for each subnet even if no addresses will be dynamically allocated on that subnet. Some installations have physical
- Secure Shell - ssh unter CentOS 7.x @centos
- , however they can perform operations on the keys that enable them to authenticate using th... perability with legacy protocol 1 implementations that do not support the 3des cipher. Its... dress. The bind_address of “localhost” indicates that the lis‐ tening port be bound for lo... use only, while an empty address or ‘*’ indicates that the port should be available from al
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- default path is /var/run/chrony/chronyd.sock. If that fails (e.g. because chronyc is running und... original hostnames or IP addresses of NTP sources that were specified in the configuration fi... tries to connect to the Unix domain socket and if that fails (e.g. due to running under a non-root user)... ronised to any external source and that you have the local mode operating (via the local
- Grundabsicherung von Postfix @centos:mail_c6
- ss(5) table is specified as a text file # that serves as input to the postmap(1) command. ... with non-whitespace text. A # line that starts with whitespace continues a logi- # ... con- # figuration setting (note that this is the default # for some vers... T ACTIONS # OK Accept the address etc. that matches the pattern. # # all-numerical #
- Logfileanalyse und -Auswertung mit (Better-)AWStats unter CentOS 6.x @centos
- Web Statistics is a powerful and featureful tool that generates advanced web server graphic statistics.... Web Statistics is a powerful and featureful tool that generates advanced web server graphic statistics.... low the example: # Parameter="__ENVNAME__" # Note that environment variable AWSTATS_CURRENT_CONFIG is al... ter id field. # %extraX Another field that you plan to use for building a #
- TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
- , however they can perform operations on the keys that enable them to authenticate using ... address of “localhost” indicates that the listening port be bound for local use only, while an empty address or ‘*’ indicates that the port should be available from ... lic key file to use the corresponding private key that is loaded in ssh-agent(1) when the private key
- IT Infrastruktur und Sytem Monitoring mit Nagios unter CentOS 7.x @centos:web_c7
- Nagios is a program that will monitor hosts and services on your ... on various services that you specify. ... # This file contains examples of entries that need # to be incorporated into your Apache web... s # directly) in order to prevent inconsistencies that can occur # when the config files are modified
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7 @centos:mail_c7
- the access(5) table is specified as a text file that serves as input to the postmap(1) command. ... ical line starts with non-whitespace text. A line that starts with whitespace continues a log‐ ... EPT ACTIONS OK Accept the address etc. that matches the pattern. all-numerical ... 5NN text Reject the address etc. that matches the pattern, and respond with the numeric
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7 @centos:mail_c7
- , the access(5) table is specified as a text file that serves as input to the postmap(1) command... ical line starts with non-whitespace text. A line that starts with white‐ space continues ... EPT ACTIONS OK Accept the address etc. that matches the pattern. all-numerical ... 5NN text Reject the address etc. that matches the pattern, and respond with the numeri‐
- Installation mit Hilfe eines Kickstartfiles unter CentOS 7.x (PXE-Server) @centos:pxe_c7
- he # update status of each mirror to pick mirrors that are updated to and # geographically close to the ... pm-gpg/RPM-GPG-KEY-CentOS-6 #additional packages that may be useful [extras-LC] name=CentOS-7 - Extras ... pm-gpg/RPM-GPG-KEY-CentOS-6 #additional packages that extend functionality of existing packages [centos... comma-separated. The default is # ''2,1''. Note that the order of the protocol list does not indicate
- Mailserver - Logfileauswertungen unter CentOS 7.x @centos:mail_c7
- ate_time For summaries that contain date or time information, ... extended detail report (-e), to help ensure that by- domain-by-name sor... Merely a convenience feature. (Assumes that "mailq" is in $PATH. S... (last) qmgr log entry that the information is not in
- Installation des Mailinglistenservers Mailman unter CentOS 7.x @centos:mail_c7
- and confirguration task. First, you should note that the RPM has installed mailman in the following di... the package (although currently I don't think that presents any known issues). Instead a comprom... FHS=/var/run/mailman Existing directories that can now be specified as parameter to configure: ... s, sharing Mailman installations via NFS, be sure that the clocks on those two machines are synchr
- Installation und Konfigurationsdateien von Postfix 3 unter CentOS 7.x @centos:mail_c7
- he # update status of each mirror to pick mirrors that are updated to and # geographically close to the ... pm-gpg/RPM-GPG-KEY-CentOS-7 #additional packages that may be useful [extras-LC] name=CentOS-7 - Extras ... pm-gpg/RPM-GPG-KEY-CentOS-7 #additional packages that extend functionality of existing packages [centos... n soft_bounce is enabled, mail will remain queued that # would otherwise bounce. This parameter disables
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Der Cyrus Hochleistungs-Mailserver mit Unterstützung für IMAP und SIEVE unter CentOS 6.x @centos:mail_c6
- Einbinden der Wetterdaten der Davis Vantage Pro2 in das Webcam-Bild der Mobotix M25 (HD-Cam) @wetter:mobotix
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Basiskonfiguration @centos:mail_c7:php7
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- Ansible - erweiterte Konfigurationsbeispiele: Ansible mit Hilfe von Ansible einrichten @linux:ansible