Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- Bau eines Freifunk-Offloaders auf Basis eines Raspberry 4B @linux:ansible
- bridge-ports bat-{{ ffmuc_segment }} pre-up /usr/sbin/batctl ra BATMAN_V pre-up /sbin/ip link add dummy-{{ ffmuc_segment }} type dummy pre-up /sbin/ip link set address $(ip -br l | grep eth0 ... ead -1) dev dummy-{{ ffmuc_segment }} pre-up /sbin/ip link set dummy-{{ ffmuc_segment }} up
- Router Advertisements mit radvd unter Arch Linux einrichten und nutzen
- <code>2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default... w enp0s25 <code>2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 50:7b:9d:91:52:54 brd ff:ff:
- Ansible @linux:ansible
- kumentation ==== === O’REILLY Fachbuch - Ansible: Up & Running === Ein wertvoller und verlässlicher Be... essen Fähigkeiten kann sicher das Buch **Ansible: Up & Running** (ISBN: 978-1-491-97980-8) von **[[htt... ok.png?nolink&250 |Bild: Photo des Buchs Ansible: Up & Running von O`REILLY}} === Gourav Shah - Ansib... ehave in a non-idempotent way. The task could end up with a set of packages that does not matc
- DHCPv4|v6-Server mit DHCP ISC Kea unter Arch Linux einrichten und nutzen
- 36533820646528] DHCPSRV_MEMFILE_LFC_SETUP setting up the Lease File Cleanup interval to 3240 sec Jul 0... 36533820646528] DHCPSRV_MEMFILE_LFC_SETUP setting up the Lease File Cleanup interval to 3240 sec Jul 0... 38845348149120] DHCPSRV_MEMFILE_LFC_SETUP setting up the Lease File Cleanup interval to 3200 sec Oct 1
- Ansible - erweitertes Konfigurationsbeispiel 7: Ansible Vault @linux:ansible
- plugins currently evaluate up to -vvvvvv. A reasonable level to start is -vvv, ... plugins currently evaluate up to -vvvvvv. A reasonable level to start is -vvv, ... '** kommen! * Aufruf **__mit PGP Schlüssel__** :UP: \\ Im zweiten Beispiel werden wir nun erneut ver
- Erste Schritte Rund um Ansible @linux:ansible
- first attempt there is 1s wait, then 2s, 4s etc. up to 30s (max). #retries = 3 [persistent_connectio... first attempt there is 1s wait, then 2s, 4s etc. up to 30s (max). #retries = 3 [persistent_connectio
- Host based Intrusion Detection System mit AIDE unter Arch Linux
- ulting number of workers is rounded up to the next integer (e.g. '60%' of 8 processors r
- Ansible - einfaches Playbook-Beispiel: Bedingtes Kopieren @linux:ansible
- # Copy a new "ntp.conf file into place, backing up the original if it differs from the copied versio
- TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
- annel. ssh will also automatically set up Xauthority data on the server machine. For this