Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- yd' that for isolated networks of computers, they will track the 'majority vote' time. For such isolate... cular defective clock, the whole set of computers will tend to slip relative to real time (but they _will_ stay accurate relative to one another). 1.5 Distr... elf and send us a source code patch to fix it, we will be very grateful! 1.7 C
- DHCP-Server Konfigurieren unter CentOS 7.x @centos
- en mitzuteilen, daß er diese Konfiguration nutzen will. {{ :centos:dhcp_3.png |3. Stufe der DHCP-Adress... r installa‐ tions where only known clients will be served, each such client must have a host d... ation can be used. For every subnet which will be served, and for every subnet to which the dhc... s required for each subnet even if no addresses will be dynamically allocated on that subnet.
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- mmands are specified on the command line, chronyc will expect input from the user. The prompt chronyc> will be displayed when it is being run from a te... e redirected from or to a file, the prompt will not be shown. There are two ways chronyc ... chronyc is running under a non-root user), it will try to connect to 127.0.0.1 and then ::1.
- Secure Shell - ssh unter CentOS 7.x @centos
- le on modem lines and other slow connections, but will only slow down things on fast networ... OCKS4 and SOCKS5 protocols are supported, and ssh will act as a SOCKS server. Only root ca... tem-wide configuration file (/etc/ssh/ssh_config) will be ignored. The default for the per-... “yes”, then a client started with -f will wait for all remote port forwards to be successfu
- Filtergruppen bei Dansguardian @centos:dansg
- ers. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where ... e more filter groups the more copies of the lists will be in RAM so # use as few as possible. # Django 2... rtinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl... sGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs
- IT Infrastruktur und Sytem Monitoring mit Nagios unter CentOS 7.x @centos:web_c7
- Nagios is a program that will monitor hosts and services on your ... ou run Nagios with the -p command line option, it will preprocess # your object configuration file(s) an... g # multiple resource_file definitions. The CGIs will not attempt to # read the contents of resource fi... termines the frequency (in seconds) that # Nagios will periodically dump program, host, and # serv
- TOFU - Trust On First Use - SSH Zertifikate @linux:ssh
- d nehme das ernst. O.K., Antwort **1** und **2** will man definitiv **__nicht__** hören! Bei Antwort **... it zum Teil alten verwaisten Daten → nicht schön, will man so eigentlich nicht haben sondern vermeiden w... ee below). If a command is specified, it will be executed on the remote host instead of a login... additional arguments. If supplied, the arguments will be appended to the com‐ mand, separated
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- ble error condition, the SMTP+LMTP client will try to deliver the mail to an alter‐ nate ... parameter (default value of 24) will be used. An IPv6 address must be f... of message header and body lines that Postfix will send via SMTP. smtp_pix_wor... ) that the Postfix SMTP client will ignore in the EHLO response from a
- Installation des Mailinglistenservers Mailman unter CentOS 7.x @centos:mail_c7
- 15 When the package has finished installing, you will need to perform some additional installation step... 18 When the package has finished installing, you will need to perform some additional installation step... ip> When the package has finished installing, you will need to perform some additional installation step... Red Hat mailman RPM. There are certain items you will need to manually configure as the RPM is not capa
- Alternativer FastCGI Process Manager für den Apache httpd unter CentOS 7.x @centos:web_c7
- specify that messages from different facilities ; will be handled differently. ; See syslog(3) for possi... terval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default ... _interval to determine when ; a graceful restart will be initiated. This can be useful to work around ... imeout = 0 ; The maximum number of processes FPM will fork. This has been design to control ; the globa
- Optimierung von Dansguardian @centos:dansg
- r dem Dansguardian etwas die Luft ab, was heissen will, wir lassen uns nur noch die geblockten Seiten re... r group. # Multiple plugins can be specified, and will be queried in order until one # of them either fi... rtinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl... sGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs
- Installation und Konfiguration von ClamAV für AMaViS unter CentOS 7.x @centos:mail_c7
- - Experimental support of OpenIOC files. ClamAV will now extract file hashes from OpenIOC files ... features at this time. No OpenIOC files will be delivered through freshclam. See op... ew service called "Third Party web interface". It will allow selected individuals/organizations to publi... natures through our Third Party web interface you will benefit from the following: - befo
- Logfileanalyse und -Auswertung mit (Better-)AWStats unter CentOS 6.x @centos
- an environment variable in any parameter (AWStats will replace # it with its value when reading it), fol... irtual web servers. AWStats # will discard records not in SiteDomain nor HostAliases... your log file). # With DNSLookup to 0, all hosts will be reported by their IP addresses and # not by th... eed to set DNSLookup to 1, don't forget that this will reduce # dramatically AWStats update process spee
- Erste Schritte Rund um Ansible @linux:ansible
- le-playbook # or with command line flags. ansible will read ANSIBLE_CONFIG, # ansible.cfg in the current... e_lang = C #module_set_locale = False # plays will gather facts by default, which contain informatio... True by default for backwards compatibility. It # will be changed to a default of 'False' in a future re... ynamic by default. Setting these # values to True will make includes behave more like they did in the #
- Dansguardian Version 2.10.1.1 - Installation und Konfiguration unter CentOS 6.x @centos:dansg
- sGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs... rtinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl... sGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs... rts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Der Cyrus Hochleistungs-Mailserver mit Unterstützung für IMAP und SIEVE unter CentOS 6.x @centos:mail_c6
- Ansible - erweiterte Konfigurationsbeispiele: Ansible-Controll-Node und SSH-Jumphosts @linux:ansible
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Grundinstallation und Konfiguration @centos:mail_c7:php7
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7