Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Passende Seitennamen:
- APC UPS Daemon unter CentOS 7.x
- Changelog beim Paketupdate
- CUPS Konfiguration unter Fedora 19
- Filtergruppen bei Dansguardian
- Backupmailserver
- Backup-Mailserver mit Postfix 2.11 unter CentOS7
- Backup-Mailserver mit Postfix 3.x unter CentOS 7
- Backupmailserver
- Asterisk-User und -Gruppe anlegen
- TK-Leistungsmerkmal - Filtergruppen
- TK-Leistungsmerkmal Gruppenruf
- TK-Leistungsmerkmal - Anrufübernahmegruppe - PickUp
- Asterisk-User und -Gruppe anlegen
Volltextergebnisse:
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- the Postfix source archive show set up a Postfix chroot environment on a variety of syst... ning daemons chrooted. Wake up time (default: 0) Automatically wake up the named service after the specified number of seconds. The wake up is implemented by connecting to the service and
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- y service to other computers. A typical set-up is to run 'chronyd' on a gateway computer that has a dial-up link to the Internet, and use it to serve ti... od appears to be 10 minutes. Computers can build up significant offsets relative to each other i... asonable guarantee that the system will stay up for a reasonable length of time afterwards. (If
- Bau eines Freifunk-Offloaders auf Basis eines Raspberry 4B @linux:ansible
- bridge-ports bat-{{ ffmuc_segment }} pre-up /usr/sbin/batctl ra BATMAN_V pre-up /sbin/ip link add dummy-{{ ffmuc_segment }} type dummy pre-up /sbin/ip link set address $(ip -br l | grep eth0 ... ead -1) dev dummy-{{ ffmuc_segment }} pre-up /sbin/ip link set dummy-{{ ffmuc_segment }} up
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7 @centos:mail_c7
- the SMTP client. This frees up SMTP server resources so that they can be made av... hat is applied to the entire string being looked up. Depending on the application, that str... er@domain mail addresses are not bro‐ ken up into their user@ and domain constituent parts, nor is user+foo broken up into user and foo. Patterns are applied
- Grundabsicherung von Postfix @centos:mail_c6
- from the SMTP client. This frees up SMTP # server resources so t... pplied to # the entire string being looked up. Depending on the appli- # cation, that ... user@domain mail addresses are not broken up into their # user@ and domain constituent parts, nor is user+foo broken # up into user and foo. # # Patterns are appli
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7 @centos:mail_c7
- mmediately from the SMTP client. This frees up SMTP server resources so tha... applied to the entire string being looked up. Depending on the application, that string is an ... s done, user@domain mail addresses are not broken up into their user@ and domain constituent parts, nor is user+foo broken up into user and foo. Patterns are applied i
- NTP-Zeitserver mit chrony unter Linux einrichten und nutzen @linux
- stem clock is normally corrected only by speeding up or slowing down (up to the rate configured by the maxslewrate directive). If the offse... rect any time offset, by slowing down or speeding up the clock as required. In certain situ... and waits for chronyd to synchronise. Up to four optional arguments can be specified. The
- Icinga 2 - Netzwerkmonitoring mit Hilfe von SNMP @centos:web_c7:icinga
- own** und die gelb und grün markierten Ports sind up, also in Verwendung. Mit **''snmpwalk''** können ... erStatus. <code>IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.49153 = INTEGER: up(1) IF-MIB::ifOperStatus.49154 = INTEGER: up(1) IF-MIB::ifOperStatus.49155 = INTEGER: up(1) IF-MIB::if
- virtuelle Netzwerke mit QEMU/KVM unter CentOS 6 @centos:kvm
- Netzwerk an. # ip addr <code>1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:... eferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:25:90:13:ba:a0 brd ff:ff:ff:f
- DHCP-Server Konfigurieren unter CentOS 7.x @centos
- r DHCP clients. To do this, you would set up a pair of pool declarations: subnet 10.0.... } } It is also possible to set up entirely different subnets for known and unknown ... server goes down, and the other server comes back up, the other server will not know that the f... be honored. When the failed server starts up, it notices that it has no saved failover state,
- Installation des Mailinglistenservers Mailman unter CentOS 7.x @centos:mail_c7
- /share/doc/mailman-2.1.15/admin/doc/mailman-admin/up.png /usr/share/doc/mailman-2.1.15/admin/doc/mailm... hare/doc/mailman-2.1.15/admin/doc/mailman-install/up.png /usr/share/doc/mailman-2.1.15/admin/doc/mailm... re/doc/mailman-2.1.15/admin/doc/mailman-member-es/up.png /usr/share/doc/mailman-2.1.15/admin/doc/mailm... share/doc/mailman-2.1.15/admin/doc/mailman-member/up.png /usr/share/doc/mailman-2.1.15/contrib /usr/sh
- Installation und Konfiguration von ClamAV @centos:mail_c6
- cker -left-> amavis amavis -down-> virus virus -up-> amavis amavis -left-> spam spam -right-> amav... are. Most importantly, the virus database is kept up to date /etc/freshclam.conf /usr/bin/clambc /usr/... any emails. # You will need to periodically clean up $TemporaryDirectory/clamav-partial directory. # W... containers are recursively extracted and scanned up to this # value. # Value of 0 disables the limit
- Logfileanalyse und -Auswertung mit (Better-)AWStats unter CentOS 6.x @centos
- y specific IP addresses that should NOT be looked up in DNS. # This option is used only if DNSLookup=1... PARAMETERS: None # DESCRIPTION: Add tooltips pop-up help boxes to HTML report pages. # NOTE: This w... rl Geo::IPfree # module, database is free but not up to date) or the GeoIP plugin (need # Perl Geo::IP module from Maxmind, database is also free and up to date). # Note: Activestate provide a corrupted
- Logdatenanalyse mit graylog unter CentOS 7.x @centos:web_c7
- red # in the gateway, and when the cluster starts up for the first time, # it will read its ... w recovery process after N nodes in a cluster are up: # ... ess, once the N nodes # from previous setting are up (accepts time value): # ... xpected in this cluster. Once these N nodes # are up (and recover_after_nodes is met), begin recovery
- Filtergruppen bei Dansguardian @centos:dansg
- und # If enabled then the phrases found that made up the total which excedes # the naughtyness limit w... and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and searc... IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting co... requests. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting co
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Ansible - erweiterte Konfigurationsbeispiele: Ansible-Controll-Node und SSH-Jumphosts @linux:ansible
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Grundinstallation und Konfiguration @centos:mail_c7:php7
- phpMyAdmin 4.7 unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Ansible cowsay: Die sprechende Kuh, oder auch mehr Getier oder doch nur puristisch mit dem Ansible Stdout Compact Logger? @linux:ansible
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
127.0.0.1