Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Passende Seitennamen:
- Darstellung des Energieverbrauchs (Strom und Gas)
- Virenschutz mit Hilfe von AMaViS und SpamAssassin
- Installation von CentOS 5.x über das Netzwerk (local/extern)
- Installation von CentOS 6.x über das Netzwerk (local/extern)
- Loginmeldungen individuell anpassen
- Router flashen
- Offloader auf Basis eines FUTRO Thinclient
- UniFi UAP Router flashen
- GPS Datenerfassung und Auswertung
- Einrichten von Asterisk 1.4 unter CentOS5
- asterisk2
- Download der Asterisk-Quellen
- Installation von Asterisk
- konfiguration_asterisk_og
- Einrichten von Asterisk unter CentOS
- Wetterbeobachtung und -datenerfassung bei der Wetterstation Pliening
- Wetterbeobachtung und -datenerfassung bei der Wetterstation Pliening
- Installation des ersten Test-Gasts (vHOST)
- Installation und Basisinstallation der Virtualisierungsmaschine
- Basiskonfiguration von horde
- Horde Passwortänderungen: Passwd
- eMail-Befehl: password
- DMARC - Domain-based Message Authentication, Reporting & Conformance
- Installation und Konfiguration von Spamassassin
- Dovecot, Quotas - Speicherquoten für User und Maildomains
- Basiskonfiguration des Frameworks Horde 5 unter CentOS 7.x
- Horde 5 Applikation Passwortänderungen: Passwd unter CentOS 7.x
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7
- SASL-Authentifizierung beim Postfix MTA 2.11 unter CentOS 7
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7
- SASL-Authentifizierung beim MailTransferAgent Postfix 3.x unter CentOS 7
- Postscreen - Schutz vor Überbelastung und SPAM-Abwehr
- Spamassassin für AMaViS unter CentOS 7.x
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x
- eMail-Befehl: password
- erweiterter SPAM-Schutz mit Hilfe von SpamAssassin
- SASL-Authentifikation
- Alternativer FastCGI Process Manager für den Apache httpd unter CentOS 7.x
- IT Infrastruktur und Sytem Monitoring mit Nagios unter CentOS 7.x
- Ansible
- Bau eines Freifunk-Offloaders auf Basis eines Raspberry 4B
- Ansible - einfaches Playbook-Beispiel: sudoers anpassen
- Einrichten von Asterisk 1.6 unter CentOS5
- nützliche Kommandos rund um Asterisk
- cdr.conf
- Asterisk Grundkonfiguration
- deutsche Sprachprompts
- Asterisk erster Wählplan
- Wählplanerweiterungen für die ISDN-Anbindungen
- fehlende Paket für Asterisk 1.4 unter CentOS5 nachinstallieren
- deutsche Sprachprompts für Asterisk
- Asterisk installieren
- Asterisk Anbindung ans ISDN
- Konfiguration von Asterisk 1.4
- misdn-init.conf
- mISDN
- Music On Hold
- MySQL-Datenbankdefinitionen
- odbc.ini
- Asterisk-Repository einbinden
- Asterisk unter CentOS
- Asterisk-User und -Gruppe anlegen
- Einrichten von Asterisk 1.4 unter CentOS5
- nützliche Kommandos rund um Asterisk
- TK-Leistungsmerkmal - Black-/Whitelisting - Sperrlisten
- Asterisk Grundkonfiguration
- Asterisk erster Wählplan
- Wählplanerweiterungen für die ISDN-Anbindungen
- dialplan3
- TK-Leistungsmerkmal - Filtergruppen
- deutsche Sprachprompts für Asterisk
- TK-Leistungsmerkmal Gruppenruf
- Asterisk installieren
- Asterisk Anbindung ans ISDN
- Music On Hold
- TK-Leistungsmerkmal - Nachtschaltung
- TK-Leistungsmerkmal - Anrufübernahmegruppe - PickUp
- Asterisk-Repository einbinden
- Einrichten von Asterisk 1.8 unter CentOS5
- TK-Leistungsmerkmal - Doppelruf/Parallelschaltung/Twinning
- Asterisk-User und -Gruppe anlegen
- TK-Leistungsmerkmal - VIP-Behandlung
- VoiceMail
- Einbinden der Wetterdaten der Davis Vantage Pro2 in das Webcam-Bild der Mobotix M25 (HD-Cam)
- Einbinden der Wetterdaten der Davis Vantage Pro2 in das Webcam-Bild der Mobotix M22M
- Das Perl-Scriptchen
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Basiskonfiguration
- IT Infrastruktur und System Monitoring mit Icinga 2 unter CentOS 7.x
- IT Infrastruktur und System Monitoring mit Icinga 2 unter CentOS 7.x
- Einrichten von Asterisk 1.8 unter CentOS6
- Einrichten von Asterisk 14.x unter CentOS7
Volltextergebnisse:
- Postfix, der sichere Mailserver (MTA) unter CentOS 7.x @centos:mail_c7
- iert eine eMail mit seinem MUA (Mail User Agent)" as sender state "MUA (Mail User Agent)" as sender sender : Anwender erstellt eine Nachricht sender : mit... il oder R2Mail2 state "DNS (Domain Name System)" as dns { state "Anfragen an den zuständigen Name-Server" as dns_anfragen dns_anfragen : │ dns
- NTP - Zeitserver unter CentOS 7 einrichten und nutzen @centos
- ce clocks, system real-time clock or manual input as time references. /etc/NetworkManager/dispatcher.d... 'chronyd' can also act as an NTP server, and provide a time-of-day ser... the gateway. The IP addresses that can act as clients of 'chronyd' can be tightly controll... e 'chrony' suite makes use of the algorithm known as _RSA Data Security, Inc. MD5 Message-Digest Algo
- Grundabsicherung von Postfix @centos:mail_c6
- Einfluß haben. <uml> state "/usr/bin/sendmail" as sendmail sendmail : Postfix - Modul sendmail : "postdrop" state "Internet" as smtp_in smtp_in : TCP/IP smtp_in : Port 25 state "maildrop" as maildrop maildrop : Postfix - Queue maildrop : "maildrop" state "MDA" as lmtp_24 lmtp_24 : (Mail Delivery Agent) lmtp_24
- Konfiguration unseres MTAs Postfix 2.11 unter CentOS7 @centos:mail_c7
- Normally, the access(5) table is specified as a text file that serves as input to the postmap(1) command. The result, an indexed file i... When the table is provided via other means such as NIS, LDAP or SQL, the same lookups are done as for ordinary indexed files. Alternatively
- Konfiguration unseres MTAs Postfix 3.x unter CentOS 7 @centos:mail_c7
- Normally, the access(5) table is specified as a text file that serves as input to the postmap(1) command. The result, an indexed file in dbm... When the table is provided via other means such as NIS, LDAP or SQL, the same lookups are done as for ordinary indexed files. Altern
- DHCP-Server Konfigurieren unter CentOS 7.x @centos
- ers\n participant "\n DHCP - SERVER \n" as links participant "\n Client \n" as rechts links <-- rechts : (Port 67) ... bit subnets on the same ethernet until such time as a new physical network can be added.... fore subnets) will receive the same configuration as stateful ones. Some sites may have depart
- Logfileanalyse und -Auswertung mit (Better-)AWStats unter CentOS 6.x @centos
- is server log analyzer works from command line or as a CGI and shows you all information your log cont... is server log analyzer works from command line or as a CGI and shows you all information your log cont... s/icon/flags/arpa.png /var/www/awstats/icon/flags/as.png /var/www/awstats/icon/flags/at.png /var/www/a... redefined value (1,2,3,4) # Backslash can be used as escape character. # Example: " " # Example: "\t"
- Installation des Mailinglistenservers Mailman unter CentOS 7.x @centos:mail_c7
- certain items you will need to manually configure as the RPM is not capable of doing every installatio... security violations when SELinux is enabled. As of mailman-2.1.5-21 the following directory and f... The mapping of old locations to new locations is as follows: Directory Mapping: /var/mailman... ONFIG_DIR. New Directories (can be specified as parameter to configure): CONFIG_DIR: default
- Secure Shell - ssh unter CentOS 7.x @centos
- t instead of a login shell. The options are as follows: -1 Forces ssh to try protocol... Use bind_address on the local machine as the source address of the connection. Only usefu... cols are supported, and ssh will act as a SOCKS server. Only root can forward privileged... in_name Specifies the user to log in as on the remote machine. This also may be specifie
- Filtergruppen bei Dansguardian @centos:dansg
- more copies of the lists will be in RAM so # use as few as possible. # Django 2011-11-15 # Default: filtergroups = 1 # Definition der Filtergruppen # # -... dian config file for version 2.10.1.1 # **NOTE** as of version 2.7.5 most of the list files are now i... = log exceptions, but do not explicitly mark them as such # 2 = always log & mark exceptions (default)
- Optimierung von Dansguardian @centos:dansg
- on of client usernames from various sources, such as # Proxy-Authorisation headers and ident servers, ... dian config file for version 2.10.1.1 # **NOTE** as of version 2.7.5 most of the list files are now i... = log exceptions, but do not explicitly mark them as such # 2 = always log & mark exceptions (default)... in # DNS for load balancing, DG may mark requests as invalid unless DG gets # exactly the same answers
- Installation und Konfiguration von ClamAV für AMaViS unter CentOS 7.x @centos:mail_c7
- is line... MAILTO=root ## It is ok to execute it as root; freshclam drops privileges and becomes ## user 'clamupdate' as soon as possible # Django : 2014-11-15 # default: alle 3 Stunden # 0 */3 * * * root /usr/sh... chmann -- REGARDING OPENSSL In addition, as a special exception, the copyright holders give p
- Grundinstallation von AMaViS unter CentOS 7.x @centos:mail_c7
- er.conf># User to run under (must be same as amavisd daemon) AMAVIS_USER=amavis ... d idea to adjust them to the same # value as sendmail connection timeout. AMAVISD_TIMEOUT=600 ... $syslog_facility = 'mail'; # Syslog facility as a string # e.g.: mail, da... from internal hosts to a dedicated TCP port (such as 10026) for filtering $interface_policy{'10026'} =
- Horde Framework 5 unter CentOS 7.x - Grundinstallation und Konfiguration @centos:mail_c7
- ng /usr/share/horde/themes/default/graphics/flags/as.png /usr/share/horde/themes/default/graphics/flag... ols for developers. When you have installed Horde as described below, you will probably want to install some of the available Horde applications, such as IMP_ (a webmail client), or Kronolith_ (a calenda... ystem. If you use Apache, be sure to build PHP as a library with one of the following options::
- Zeitbegrenzung bei Dansguardian @centos:dansg
- more copies of the lists will be in RAM so # use as few as possible. # Django 2011-11-16 # Default: filtergroups = 1 # Definition der Filtergruppen # # -... dian config file for version 2.10.1.1 # **NOTE** as of version 2.7.5 most of the list files are now i... = log exceptions, but do not explicitly mark them as such # 2 = always log & mark exceptions (default)
- DMARC - Domain-based Message Authentication, Reporting & Conformance unter CentOS 7.x @centos:mail_c7
- Icinga Web 2 - Einbinden von NagVis zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- Installation eines Ansible-Orchestrator-Management-Hosts mit Hilfe eines Kickstartfiles für CentOS 8.x (PXE-Server) @centos:pxe_c8
- Postfixadmin 3.1 zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM @centos:mail_c7
- Postfixadmin zur Verwaltung der Maildomains und der Nutzerkonten des Dovecot-IMAP-Servers unter CentOS 7.x @centos:mail_c7
- Icinga2 Einbinden von Graphite zur graphischen Visualisierung - Installation und Konfiguration unter CentOS 7.x @centos:web_c7:icinga
- phpMyAdmin 4.7 unter CentOS 7.x mit Apache 2.4, PHP 7.2 und PHP-FPM installieren und einrichten @centos:web_c7
- Nitrokey 3C NFC und Nitrokey 3A mini in der Praxis unter Linux Mint 21.2 (Victoria) @nitrokey:linuxmint
- Ansible - einfaches Playbook-Beispiel: NTP-Daemon chrony installieren und konfigurieren @linux:ansible
- Icinga Director - Graphisches Konfigurations WEB GUI für Icingaweb2 unter CentOS 7.x @centos:web_c7:icinga
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Basiskonfiguration @centos:mail_c7:php7
- Horde Framework 5 unter CentOS 7.x mit Apache 2.4, PHP 7 und PHP-FPM installieren und einrichten - Grundinstallation und Konfiguration @centos:mail_c7:php7
- Anbindung unseres MTAs Postfix 2.11 an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Anbindung unseres MTAs Postfix 3.x an einem Backend-Mailserver (Dovecot-IMAP-Server) unter CentOS7 @centos:mail_c7
- Der Cyrus Hochleistungs-Mailserver mit Unterstützung für IMAP und SIEVE unter CentOS 6.x @centos:mail_c6